ERKEI SEHN Portable Bluetooth Speaker User Guide

ERKEI SEHN Portable Bluetooth Speaker

PACKING LIST

• Speakerx1
• Quick start guide x 1
• Type-C charging cable x 1

PRODUCT SPECIFICATIONS

1. version – – – – BT 5.3
2. S/N – – – – – – >90dB
3. Play Time – – – – – – 24hrs
4. Charging Time – – – – – – – 3hrs
5. Power Input – – – – – DC5V 2A
6. Bluetooth Available Range – – – s 30m / l00ft
7. Tws Pairing Range – – – – – s 15m / 50ft
8. Frequency Response – 90Hz-20KHz
9. Package Weight – – – 615g / 1.36Ib
10. Signal source Bluetooth , 3.5mm AUX
11. Package Size – – 23076’77mm / 93*3In
12. Power Output 12.5W*2@ 0db lKHz 10% THD line in

Note:

1. Playtime varies according to volume level and audio content.
2. Press the power button twice in quick succession to enable or disable the voice prompts

PRODUCT OVERVIEW

NOTE

• In the charging state, the white light of the current battery flashes, and the four white lights are always on when fully charged.
• When it is in a low battery alert. The last white light quickly flashes once after one second, 1nd1cat1ng that the battery Is low and needs to be charged in time.

PAIRING YOUR SPEAKER

1. Long press the for 2 seconds, and it will power on and automatically enter the Bluetooth mode and the ·sruetooth Indicator· quick1y flashes once ofter one second when it is waiting for pairing.
2. On your device, enable Bluetooth and tap ‘BEAT BOOM”and pair.
3. Once paired successfully, the “Bluetooth Indicator’ light will be solid on.

NOTE

• Pairing time Is varied with different mobile phones. It only needs to pair at the first time and it will automatically connect to the devices which were already paired before
• Connect the speaker to your device with an auxiliary coble (not provided), and the speaker will enter auxiliary mode automatically.

SPECIAL FEATURES

A. TWSMode

1. Turn on two “BEAT BOOM” Bluotooth speakers.
2. Quickly double-click the of either speaker, and you will hear a short prompt tone, indicating that the two speakers are successfully corrected. Double click the , again to exit the TWS function

NOTE

• The speaker with the Bluetooth indicator tight flashing is the Primary Speaker, and the other is the Secondary Speal::er.
• Once successfully connected In TWS mode, the connected Primary Speaker can control the Secondary Speaker, and the Secondary Speaker connect, the Primary Speaker

B. EQ Light Switch
Choose from 3 dazzling lighting modes.

NOTE
When the “BEAT BOOM” is turned on. Press and hold for 5S to enter the light self- check function (It will check the battery level Indicator, speaker lig hts, RGB lights, and then automatIcoI1y shut down ofter the self-check Is completed).

C. Automatic Memory Function
After the produc t is successfully connec t ed for the first time, the Bluetooth speake r will automatically try to reconnect to the last connected device when you power on the speaker the next time if the last connected d device is within its effective connection range. At the some time, it will memorize the sound volume and light settings you set the last time – no need to adjust it again manually.

D. Smart Power Saving
Bluetooth disconnected or not connected state: automatic shutdown after 5 minutes; Bluetooth connected but no music is played: automatic shutdown ofter 15 minutes.

E. Answer or End a Call

1. Short press the button to answer on incoming call.
2. Short press the button again to end the call.
3. Long press the button to reject on incoming call.

BATTERY INDICATOR

To check the battery level, short-press the power button.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.

WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>