Betson W88L Coastal Toy Soldier User Manual

June 9, 2024
Betson

Betson W88L Coastal Toy Soldier User Manual
Betson W88L Coastal Toy Soldier

OPERATION

How to Play

  1. Insert coins/tokens into coin slot, the display shows credits and the crane plays game music.
  2. Use joystick to move claws above your selected object. When you move the joystick, the game time is countdown, and [DESCEND] button light is flashing.
  3. At pressing [ DESCEND] button or time’s up (game’s playing time is adjustable), the gantry drives motor to lower down claws and then catch object.
  4. If ‘Catch in air’ function is available. press DESCEND button before claw reaches in flied, the claws will catch item in the air.
  5. After movement of catching (claws closes), the claws rise up till it touches Stop-Up SW. ‘then the claws move to exit area and releases.

Game Rules
DEMO Play Demo music for 2 minutes c’ cry 3 minutes.
Coin In

  1. Coins v.s. plays: By Dip SW setting
  2. If COIN pulse speed was lower than 10msec, the machine does not recognize the signal.
  3. If coin speed is over 200 msec, the machine shows error code.

Shocking Machine

  1. When a tilt is mounted at machines, and players shock the machines, it plays “Don’t Shock the Machine”.
  2. When the claw arms close and someone shocks the machines, the arms open and move back to the home position.

DIP SW Setting

DIP SW1 1 2 3 4 5 6 7 8

**When the DIP SW PIN #6 is setup on “Play till you win”, the claw strength voltage| ****VR1 Adj. of Power| ****ON| | | | | | |
****
+48V| ****OFF
****
Position where claws open at the exit| Claws lower down then release object| | ON
Claws release object at the top position| | OFF
Coin 1 & Coin 2 Linked Together| Yes| | ON
No| | OFF
Adjustment of Credit Value| Inner Value| | ON
DIP SW| | OFF
****
Bonus Plays (see bonus table) ( 4 pluses=$1) when Dip SW1-4 if off| ****YES| | ON
****
NO| | OFF
Claw moving to playfield when game begins| YES| | ON
NO| | OFF
Reserved| FIXED| | OFF
****
At the moment the program sends strong strength on the basis of the setup winning percentage, the system will keep sending strongest strength to the claw until a prize is caught.| With| | ON
****
Without| | ****OFF
Default Setting| OFF| OFF| OFF| OFF| OFF| OFF| OFF| OFF
DIP SW1| 1| 2| 3| 4| 5| 6| 7| 8
---|---|---|---|---|---|---|---|---
Coin1 of method (Coin Selector of Coin Pulse vs. Play)| 8 : 1| ON| ON| | | | | |
6 : 1| OFF| ON
4 : 1| ON| OFF
2 : 1| OFF| OFF
Coin2 of method (Bill Acceptor of Coin Pulse vs. Play)| 4 : 1| | ON| ON
3 : 1| | OFF| ON
2 : 1| | ON| OFF
1 : 1| | OFF| OFF
****
Free Play| YES| | ON
No| | OFF
Play till you win function (Output Sensor must be included.)| With| Will deduct 1 credit when win.| ON
Without| Will deduct 1 credit for each game.| OFF
Ability to change ****the Inner-Values| Yes| | ON
No| | OFF
Auto Test| With| | ON
Without| | OFF
Default Setting| OFF| OFF| OFF| OFF| OFF| OFF| OFF| OFF**

MAINTENANCE

TEST System Test:
COIN I NC +COIN2 NC+POWER ON (or Service NC+POWER ON) Enter the system Test, DISPLAY shows 0-3, then press button to confirm.
EXIT

  1. Claw Setting (COIN1 NC +POWER ON can have Claw Setting)
  2. Gantry Test (COIN2 NC +POWER ON can have Gantry TEST)
  3. System Test FO EXIT
    ;; F 1 DISPLAY and Light Test
    ;; F2 DIPSW Test
    ;; F 3 Demo Sound
    ;; F 4 Auto Demo
    ;; F5 REVESED
    ;; F 6 BACK TO DEFAUTL
    ;; F 7 Length of String adjustment

AUTO PERCENTAGING SETTING
SET Play VS Coin Value: ($0.01-9.99)
Set Prize Value: (500.01-99.99)
Set Win Percentage (Range: 01-99’/o)

How to Setup:

  1. Tilt (NC) +Button (NC) + Turn Power ON Display shows “P5” for setup auto percentage function.
  2. Tilt (NO) + Button (NO) Display “00” in flashing:
    Use Joystick and button to adjust

Function Code:
00 Exit

  1. SET Play VS Coin Value
  2. Set Prize Value
  3. Win Percentages
  4. Automatic calculate the times of super power (Qty of wins)

BONUS PLAY TABLE

CREDIT PLAYS
$1 1
$2 3
$3 4
$4 6
$5 7
$6 9
$7 10
$8 12
$9 13
$10 15
$11 16
$12 18
$13 19
$14 21
$15 22
$16 24
$17 25
$18 27
$19 28
$20 30
$21 31
$22 33
$23 34
$24 36
$25 37
$26 39
$27 40
$28 42
$29 43
$30 45

INTERNAL SETTING

TIEM Description Instruction
01 COIN1 – quantity of pay-out tickets after **inserting coins
(coin selector 1)** 0~9 0
02 COIN2 – quantity of pay-out tickets after **inserting coins
(coin selector 2)** 0~9 0
03 COIN1 – quantity of Inserted coins (coin selector 1)
1~99 1
04 COIN1 – quantity of game’s credits (coin selector 1)
1~99 1
05 COIN2 – quantity of Inserted coins (coin selector 2)
1~99 1
06 COIN2 – quantity of game’s credits (coin selector 2)
1~99 1
07 Quantity of pay-out tickets with winning prizes 0~9

0
08| Quantity of pay-out tickets without winning| 0~9| 0
09| Reserved| |
10| Game time| 0~5 =5 5~99 Sec.| 50
11| Reserved| |
12| Reserved| |
13| Catching in Air| 0~1 0=NO 1=YES|
14| Super Power Frequency| 0~1 0=Fixed 1=Random|
15| If Sensor is out of Service| 0~1 0=Machine not working, 1=Machine working|
16| Reserved| |
17| Reserved| |
18| Reserved| |
19| DEMO Music| 0~1     0=Open 1=Off| 0
20| Shaking machine-sound| 0~1     0= Open 1=Off| 0
21| Reserved| |
22| Reserved| |

ERROR CODE

Error Code Description Checking timing Trouble shooting
**Er 00** **CPU Error** When switch on the machine

1. Change U1 CPU
2. PCB is out of service.
**Er 01| ****Error while up the winding cord| 1. When switch on the machine 2. When play the game 3. Auto Demo| 1. Check if the up-stop SW is loose ? 2. Check if up-stop SW is out of work ?
3. Check if the air-plug of the gantry set connects well ?
4. PCB is fault.
****
Er 03| ****Error while down the winding cord| ****When auto demo| 1. Check if the string at the winding wheel is smooth ?
2. Check if up-stop SW is out of work ?
3. Check if the air-plug of the gantry set connects well ?
4. PCB is fault.
****
Er 0E| ****SENSOR is out of service| | 1. Check whether sensitivity of sensor is too high? Please adjust the sensitivity-VR to make sure the LED of Sensor is in Dark status.
2. Check J5 sensor harness is connected well?
3. Sensor is fault.
4. PCB is fault
****
Er 05| Stop-Forward SW or Stop- back SW Error| 1. When switch on the machine 2. When play the game 3. Auto Demo| 1. Check if the stop-forward SW or stop-back SW is out of work?
2. Check if the air-plug of the gantry set connects well?
3. PCB is fault.
****
Er 06| ****Stop-Left SW Error| 1. When switch on the machine 2. When play the game 3. Auto Demo| 1. Check if the Stop-Left SW is out of work?
2. Check if the air-plug of the gantry set connects well?
3. PCB is fault
Er 07| Coin1 Meter disconnectio| | 1. Check if the J5 PIN connects well?
2. Check if the Meter is out of work? Check if the Pin connects well? 3. PCB is fault.
Er 08| Coin2 Meter disconnectio
Er 09|
Er 10| Prize Mater dis connection
****
Er 22| Cabinet size check Error when power on| | 1. Check if the stop-front SW or stop-back SW is out of work?
2. Check if the air-plug of the gantry set connects well?
3. Check the J4 Pin on the board connect well?
4. PCB is fault**

TROUBLE SHOOTING

Items Description Coin No credit after coin in In
(law. Power Coins/tokens cannot be inserted into coin slot (law open after hitting upper-stop switch Claw is close after power on Claw doesn’t close Gantry Don’t return to its home position Don’t move either (onward and/or backward by joystick operation
Check and Maintenance

  1.  Check if the Coins vs. Plays is correct.
  2. If Coins vs. Plays can’t be adjusted, it’s possible main board problem. Please send the main board back for repair.

Comparative Coin Mech:

  1. Check the sample coin at the coin mech.
  2. Loose the coin mech sensitivity.
  3. Check if DCl2V input to coin mech.
  4. Coin mech breakdown.

Multi-Coin Mech:

  1. Adjust the coin mech data based on manual.
  2. Check if DCl2V input to coin mech. VR2 is too low. Adjust VR2 higher according to objects dimension and weight.

Claw coil burned.

  1. Main board is out of service
  2. Check if the CW at the fuse board burned?
  3. Check if the black wire at claw coil connect% well.
  4. If power off and on again, the gantry still does not return to its home position, then check if stop-back SW (Gantry & Assembly I No. 23) or stop-left SW (Gantry & Assembly I No. 21) are in proper position. Also check if their connecting wires are properly connected.
  5. Check if the air-plug of the gantry set connects well?
  6. PCB is out of service.
  7. Check if the forward/back motor fuse (FB) at the fuse board is burned?
  8. Check if J5 connecting pin of P.C.B. is properly connected.
  9. Check if stop-front SW (Gantry & Assembly I No. 22) or back-stop SW (Gantry & Assembly I No. 23) is in proper position. Also check if their connecting wires are properly connected. 4. Check if Front/Back motor is out of function or if its wires are properly connected. Also check if its shaft pinion is properly positioned.
  10. Check if J9 connecting pin of P.C.B. is properly connected.
  11. Check if all connecting pins of gantry are properly connected to the machine.

WIRING DIAGRAM

WIRING DIAGRAM

W150104 3.96mm (JP1) POWER SUPPLY

1| GND
2| GND
3| GND
4| +5V
5| +5V
6| +12V
7| +12V
8| +24V
9| +24V
10| +48V
W150104 2.54mm (J11)| W9833 JP3
---|---
1| | 1| IN2
2| | 2| IN4
3| | 3| EN04
4| | X|
5| | 4| EN05
W150104 2.54mm (J5)

1| VR23
2| VR13
3| VR11
4| VR12
5| VR21
6| VR22
7| Voltmeter +
8| Voltmeter –
W150104 2.54mm (J14)| W040316 JP1
---|---
1| | 1|
2| | 2|
3| | 3|
4| | 4|
5| | 5|
W150104 2.54mm (J14)| W040316 JP1
---|---
1| | 1|
2| | 2|
3| | 3|
4| | 4|
5| | 5|
W150104 2.54mm (J6)

1| Speaker VR 1
2| VR2
3| VR3
4| SP-
5| SP+
W150104 2.54mm (J10)

1| GND
2| PRIZE SENSOR SINGAL
3| 12V
W150104 2.54mm (J7)

1| 12V

ERROR! REFERENCE SOURCE NOT FOUND.

2 COIN1 Meter
3
4 Prize Meter
5 COIN2 Meter

W150104 2.54mm (J1)

1| GND
2| Joystick — Front SW(N.O.)
3| Joystick — Back SW (N.O.)
4| Joystick — Right SW (N.O.)
5| Joystick — Left SW (N.O.)
6| Descend SW (N.O.)
7|
8| GND
9| Descend button lamp
10| lamp 2
W150104 2.54mm (J2)| W991907 JP1
---|---
1| X| | X
2| | 1|
3| | 2|
4| | 3|
5| | 4|
6| | 5|
7| | 6|
8| | 7|
9| X| 8| X
10| | 9|
11| | 10|
12| X| 11| X
13| X| 12| X
W150104 2.54mm (J8)

1| TILT SW (N.O.)
2| DOOR TEST
3| GND
4| GND
5| COIN1
6| 12V
7| 12V
8| COIN2
9| GND
10| GND
11| HPSW
12| HP
13| 12V
14| 12V
15| SSR
16| GND
W150104 2.54mm (J4)

1| Forward/Back Motor +| 14| Forward/Back Motor –
2| Left/Right Motor –| 15| Left/Right Motor +
3| Up Down Motor –| 16| Up Down +
4| Claw Power+| 17| Claw Power –
5| X| 18| X
6| STOP FORWARD/BACK| 19| GND
7| X| 20| GND
8| Stop-Left / Right SW (N.O.)| 21| GND
9| Stop-UP SW (N.C.)| 22| GND
10| Stop-Down SW (N.O.)| 23|
11| X| 24|
12| X| 25| X
13| 12V| |

DISPLAY W991907

J1 Color 2.54 Pin –- connect W120206
1 Brown A
2 Red B
3 Orange C
4 Yellow D
5 Green E
6 Blue F
7 Purple G
8 DP
9 White COM4
10 Pink COM3
11 COM2
12 COM1

Documents / Resources

| Betson W88L Coastal Toy Soldier [pdf] User Manual
W88L Coastal Toy Soldier, W88L, Coastal Toy Soldier, Toy Soldier
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Betson User Manuals

Related Manuals