TITAN 4×4 4×6 Wood Post Anchor Installation Guide
- June 9, 2024
- Titan
Table of Contents
4×4 4×6 Wood Post Anchor
Installation Guide
4×4 4×6 Wood Post Anchor
4×4/4×6 SoftwoodWOOD POST ANCHOR
INSTALLATION
IMMPORTANT NOTE USE ONLY STAINLESS STEEL SCREWS WITH ALUMINUM DECKING.
SOLD SEPARATELY.
TITAN WOOD POST ANCHORTM KIT
RECOMMENDED TOOLS
THE INTERNATIONAL RESIDENTIAL CODE (IRC- USA) AND THE NATIONAL BUILDING
CODE OF CANADA (NBC – CANADA)
INSTALLING RESIDENTIAL GUARDS :
This product has been independantly tested according to established AC 273
procedures set out in the IRC for the USA and NBC for Canada. It can be used
as a code compliant post anchoring component in one and two family residential
guard rail applications when installed according to these directions and
conditions of use.
MATERIALS: Use SPF lumber for posts and double blocking between joists
below each post.Attach top rail to posts in POST TO RAIL DETAIL – A or B.
QUESTIONS? CONTACT US AT
1-866-577-8868
In no event shall Titan Building Products be liable for any loss or damage,
direct or otherwise, which results from the improper installation or use of
this product. If for any reason Titan Building Products becomes liable for
loss or damage, direct or otherwise, the aggregate liability of Titan Building
Products shall be limited to the retail purchase price of the products.
DRILL (1) CORNER HOLE & INSTALL (1) SCREW IN ANCHOR. DRILL (3) CORNER HOLES.
“Concrete screws sold separately. 34″x 2-1/4” min. screw size.
REMOVE
ANCHOR. INSTALL REMAINING SCREWS. ( With Wood Post )
ATTENTION:
BEFORE BEGINNING WORK, CONSULT WITH LOCAL BUILDING OFFICIALS OR ENGAGE
PROFESSIONALS TO ENSURE THAT THIS PRODUCT IS APPROPRIATE FOR YOUR INTENDED USE
OR HELP CLARIFY IF THESE WARNINGS ARE UNCLEAR OR IF YOU DO NOT UNDERSTAND ANY
OF THE INFORMATION IN THIS INSTALLATION GUIDE. ALWAYS COMPLY WITH APPLICABLE
BUILDING CODES AND BE ADVISED THAT BUILDING CODES MAY VARY.
1-866-577-8868
www.titanbp.com