GasExperts V160H75RT VanEE AI Series User Manual
- June 9, 2024
- GasExperts
Table of Contents
V160H75RT VanEE AI Series
Consumer Information
A. To ensure quiet operation of the H/ERV, each product model must be
installed using sound attenuation techniques appropriate for the installation.
B. The way your heat/energy-recovery ventilator is installed can make a
significant difference to the electrical energy you use. To minimize the
electricity use of the heat/energy-recovery ventilator, a stand-alone fully
ducted installation is recommended. If you choose a simplified installation
that operates your furnace air handler for room-to-room ventilation, an
electrically efficient furnace that has an electronically commutated (EC)
variable speed blower motor will minimize your electrical energy consumption
and operating cost.
C. Installation of a user-accessible control with your product model will
improve comfort and may significantly reduce the product model’s energy use.
TECHNICAL DATA
1.1 AIR DISTRIBUTION (NORMAL OPERATION)
NOTE: The dimensions, performance charts, defrost cycle tables and specifications are listed on the specification sheets of the unit. Visit our website at www.venmar.ca or www.vanee.ca.
INSTALLATION
WARNING
The wearing of safety glasses and gloves is recommended when installing,
maintaining or cleaning the unit to reduce the risk of injury that could be
caused by the presence of thin metal and/or high moving parts.
2.1 LOCATING AND MOUNTING THE UNIT
Choose an appropriate location for the unit:
- Within an area of the house where the ambient temperature is kept between 10°C (50°F) and 60°C (140°F);
- Away from living areas (dining room, living room, bedroom), if possible;
- So as to provide easy access to the interior cabinet for maintenance, and to the control panel on the side of the unit;
- Close to an exterior wall, so as to limit the length of the insulated flexible ducts to and from the unit;
- HRV units only: close to a drain. If no drain is close by, use a pail to collect run-off;
- Away from hot chimneys, electrical panel and other fire hazards;
- Within 6 feet of a power source (standard outlet).