Topmaq Safe 20l Electronic Keypad Instructions
- June 9, 2024
- TOPMAQ
Table of Contents
Safe 20l Electronic Keypad
Instructions
Safe 20l Electronic Keypad
Accessories list
Bolts
4PC| Batteries
4PC| Carpet
1PC| Emergency key
2PC
| | |
HOW TO OPEN THE SAFE
Step1: Take off the cover, then insert the emergency key and turn to the
left.
Step2: Turn the knob to the right, then open the door.
HOW TO SET USER CODE
Step1: When door is open, open the battery compartment, and insert
batteries.
Step2: push the Reset button. You can input user code (from 3-8 digits)
within 15 seconds. Then press “A”or“B” to confirm it.
Step3: with the door open, press “0” two times , then press the reset
button and input your master code (3—8digits).
Press“A”or“B”to confirm it.
INSTALLING THE SAFE
Step1: Place safe against the wall
Step2: Mark where holes need to be drilled.
Step3: Drill holes.
Step4: Place expansion bolts in holes.
Step5: Align holes in safe with expansion bolts on wall. Place screws and
tighten.
• NOTE
PLEASE DO NOT LEAVE YOUR EMERGENCY KEY IN YOUR SAFE
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>