the first years Y1095AUT2 2-in-1 Simple Serve Bottle Warmer Instruction Manual

June 8, 2024
The First Years

the first years Y1095AUT2 2-in-1 Simple Serve Bottle Warmer

the-first-years-Y1095AUT2-2-in-1-Simple-Serve-Bottle-Warmer-
PRODUCT

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should ahways be followed including the following:

  1. Read all instructions.
  2. Do not place your hands in or around the warmingchamber during heating
  3. Toprevent injury, always shake bottle wel and test temperature of contents before giving bottle toyour child Aliso, if heating baby food aways test temperature before feeding your child.
  4. Do not touch hot surfaces. Use handles.
  5. Toprotect against electrical shock do not immerse cord, plugs, or applianoe in water or other liquid.
  6. Allowunit to cool before removing warming chamber basket
  7. Close supervision is necessary when any appliance is used near children
  8. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries.
  9. TOMYdoes not make, offer, or recommend any accessory attachments for this unit. The use of any kind of accessory attachment may cause injury.
  10. Forhousehold use only.
  11. Unplug from outlet when not in use and before dleaning Allow to cool before putting on or taking off parts
  12. Donot operate ary appliance w ith a damaged cord or plug or after the applianoe malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment
  13. Do not use outdoors.
  14. Donot let cord hangover edge of table or counter, or touch hot surfaces.
  15. This product does not require preheating
  16. Donot place on or near a hot gas or electric burner, orin a heated oven.
  17. The user should not attempt to service or repair the unit
  18. No serviceable parts inside.
  19. Extreme caution must be usedw hen moving an appliance containing hot oil or other hot liquids.
  20. Save these instructions for future use.
  21. Todisoonnect, tum any control to”OFF”, then remove plug from wall outlet.
  22. Do not use appliance for other than intended use.
  23. Before serving be sure food is at safe temperature.
  24. Before serving unplug cord from wall outlet. Do not leave cord within childs reach.
  25. The heating element surface is subject to residual heat after use.
  26. This applianoe is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of ex perience and knowledge, unless they have been gven supervision orinstruction concerning use of the applianoe by a person responsible for their safety.
  27. Children should be supervised to ensure that they do not play withthe applianoe.
  • Water vial: Dishwasher safe (top rack only).
  • Baskets, adapter ring: Dishwasher safe (top rack only).
  • Sanitizer Lid: Dishwasher safe (top rack only)
  • Bottle warmer unit: ALWAYS TURN OFF AND UNPLUG BEFORE CLEANING Wipe surface of unit as well as inside warming chamber with a damp doth or sponge using mild liquid soap. Wipe with clear water. Air dry. DO NOT IMMERSE BOTTLE
  • WARMER IN WATER. Do not use scouring pads, solvents or abrasive cleaners as they could damage the unit.
  • Warming chamber: Mineral deposits (uSually white in color) may form on the inner surfaces of the warming chamber and can cause damage to the unit
  • To remove mineral deposits:
  1. Unplug the unit.
  2. Remove the basket, and wash separately as indicated above.
  3. Pour 2 oz. vinegar into the warming chamber and let it stand for an hour or two (longer if necessary).
  4. Pour out the vinegar and rinse the chamber two or three times with 3 or 4 oz. of clean tap water.
  5. Do not immerse the Bottle Warmer in water. Wipe dry or air dry.

SAVE THESE INSTRUCTIONS

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk ofelectric shock this plug is intended to fit into a polarized outet only one way. If the plug does not fit fully into the outlet, reverse the plug, Ifit still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

  1. A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
  2. Longer extension cords are available and may be used if care is exercised in their use.
  3. If a longer extension cord is used:
  • The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance;
  • B. The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.

WARNINGS

  • ALWAYS mix bottle/stir food well and test temperature of contents before gwing bottle to child.
  • ALWAYS turn unit off and unplug to clean.
  • DONOT use glass bottles in Warmer- sudden temperature change may cause glass to break.
  • DONOT immerse unit in water.
  • DONOT use scouring pads, sovents or abrasive cleaners to cleanunit

TO USE

HEAT BOTTLE/JAR:

  1.  Place unit on a flat surface and plug intoAC the outlet.

  2. Fil water vial with room temperature water to recommended time marking (minutes) listed in WATER MEASURING GUIDE. The time listed is a recommendation ONLY. The vial markings DO NOT provide exact durations.

  3. Pourwater from vial into thewarming chamber.

  4. Aways place basket intowarming chamber first before adding bottle orjar. Donot place bottle/jar directly onto heating element.
    A Wide neck bottle: Place bottle into lift out basket
    B.Slimneckbottle (straight.or angled: Place adapter ring on top of the basket warmer and then place bottle into basket
    C. Disposable bottle or baby food jar: Insert into lift out basket.
    NOTE: Remove lid of baby food jar before placing into the lift out basket.

  5. Press the ON button Button will ight to indicate that unit is heating

  6. When thelight turns off the warming cycle is complete. The heater shuts off automatically.

  7.  Remove bottle/jar from the chamber and allow it to cool before handling

Adjust the level of water (minute marking) in the water vial as follows:

  • If the contents are too hot- use less water in the water vial.
  • lf contents are too cool-use more water in the water vial.
  • ALWAYS mbc bottle/ stir the food well and test the temperature of contents before giving a bottle to a child.
  • Wait 10 minutes before heating a second bottle to avoid overheating

THE WATER MEASURING GUIDE RECOMMENDED MINUTE MARKINGS

the-first-years-
Y1095AUT2-2-in-1-Simple-Serve-Bottle-Warmer-FIG-3

NOTE: The recommended heating times are not exact durations.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals