Outopee 941228127868 1-Drawer White Nightstand with Bottom Shelf Installation Guide
- June 4, 2024
- Outopee
Table of Contents
Installation Steps
Note: The four laminates are
not the same size.
941228127868 1-Drawer White Nightstand with Bottom Shelf
-
First, install the No. 1 board on the No. 2 board
-
Install the No. 3 board on the No. 1 board
-
Install the No. 3 board as shown in the previous step.
-
Install the No.4 plate as shown on the board. and No. 2 board. previous step. the figure, then the drawer of this product has been installed.
-
Install the No. 5 plate, No. 6 plate, No. 7 plate, and No. 8 plate on the No. 9 plate in order of size. (No. 5 board is the smallest, installed on the top.)
-
Connect the No.10 board to the previous step.
-
Install another No.10 plate according to the previous step as shown in the figure. After installation, fix it with screws.
-
Screw the door handle fitting into the drawer and place the loaded drawer in the compartment. As shown, the entire product has been installed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>