WATTS MS-930 Trap Primer Adaptor User Manual
- June 8, 2024
- WATTS
Table of Contents
WATTS MS-930 Trap Primer Adaptor
Engineering Specification
- Job Name –––––––––––––––––––––––––––––––––––––––––––
- Job Location –––––––––––––––––––––––––––––––––––––––––
- Engineer –––––––––––––––––––––––––––––––––––––––––––––
- Approval –––––––––––––––––––––––––––––––––––––––––––––
- Tag –––––––––––––––––––––––––––––––––––––––––––––––––
- Contractor ––––––––––––––––––––––––––––––––––––––––––––
- Approval –––––––––––––––––––––––––––––––––––––––––––––
- Contractor’s P.O. No. ––––––––––––––––––––––––––––––––––
- Representative ––––––––––––––––––––––––––––––––––––––––
Specification
Watts MS-930 epoxy coated cast iron trap primer adaptor with 1/2″(13) NPT
threaded tapping, and no hub connections.
NOTICE
The information contained herein is not intended to replace the full product
installation and safety information available or the experience of a trained
product installer. You are required to thoroughly read all installation
instructions and product safety information before beginning the installation
of this product.
Watts product specifications in U.S. customary units and metric are
approximate and are provided for reference only. For precise measurements,
please contact Watts Technical Service. Watts reserves the right to change or
modify product design, construction, specifications, or materials without
prior notice and without incurring any obligation to make such changes and
modifications on Watts products previously or subsequently sold.
USA: T: 800-338-2581 • F:
828-248-3929 •
Watts.com
Canada: T: 888-208-8927 • F:
905-481-2316 • Watts.ca
Latin America: T: (52) 55-4122-0138 • Watts.com
ES-WD-MS-930 2142
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>