HALIDODO HW-7 Red Light Therapy for Body User Manual

: June 8, 2024
: HALIDODO

HALIDODO HW-7 Red Light Therapy for Body

HALIDODO-HW-7-Red-Light-Therapy-for-Body-Product

GENERAL DESCRIPTION

The non-Contact Forehead IR Thermometer is specially designed to take the body temperature of a person regardless of room temperature. Depending on various skin types and thicknesses, there may be temperature differences.

SAFETY INFORMATION

This device must only be used for the purposes described in this instruction manual
This device must only be used in an ambient temperature range between 10 and 40°C
Do not expose this thermometer to electrical shocks.
Do not expose this thermometer to extreme temperature conditions of >50°C or <0°C
Do not use the device in relative humidity higher than 85%.
Do not use the device near large electromagnetic fields such as found with cordless or cell phones.
Keep the device away from water and heat, including direct sunlight.
Do not drop or knock the device, and do not use it if damaged.
It may affect the accuracy of measurements when the forehead is covered by hair, perspiration, a cap, or a scarf.
Keep the Measuring distance as 5cm-15cm (2in-5.9in).
When the body infrared thermometer should be left in that room for 15 to 20 minutes before use.
It may affect the accuracy of measurements when the forehead is covered by perspiration or other factors, please take the temperature behind the ear lobe.
Clean the glass with a cotton bud lightly moistened with 70% alcohol.

Importance:

Before taking off the temperature make sure to remove hair and perspiration from the forehead.
Selecting Body” mode to measure the body temperature; Selecting “Surface mode to measure the surface temperature.
Use of this thermometer is not intended as a substitute for consultation with your physician.
Should a problem occur with your device, please contact your retailer.
Do not attempt to repair the device yourself.
According to EMC standards, medical electronic products should be maintained specially.

FEATURES

Precise non-contact measurements
User selectable °C or °F
Selectable Body and Surface temp
Set Alarm value
Memorization of the last 32 measurements
Automatic Data Hold & Auto power off
Automatic selection range and Display Resolution 0.1°C(0.1°F)
Backlight LCD display

INTENDED USE

The non-Contact Forehead IR Thermometer is designed for body surface and forehead temperature measurement for infants and adults without contact to the human body. Non-Contact Forehead IR Thermometer can also be used to measure the temperature of a baby bottle or bath, or room temperature (by using the Surface Temp function).
NORMAL TEMPERATURES ACCORDING TO MEASUREMENT METHOD

HALIDODO-HW-7-Red-Light-Therapy-for-Body-fig-1

The temperature of the human body varies throughout the day. It can also be influenced by numerous external factors: age, sex, type, and thickness of the skin.

NORMAL TEMPERATURES ACcORDING TO AGE

HALIDODO-HW-7-Red-Light-Therapy-for-Body-fig-2

CONFIGURATION

IR Sensor
LCD Display
Mode Selection
Down Button
Up Button
Mode Button
Measurement Trigger
Battery Cover

INDICATOR

Surface mode Symbol
Body mode Symbol
Digital readout
Battery Symbol
The order number
Save data readout
Temperature °C(Celsius) °F(Fahrenheit) Scale
Buzzer symbol

DESCRIPTION OF SYMBOLS

TECHNICAL SPECIFICATIONS

HALIDODO-HW-7-Red-Light-Therapy-for-Body-fig-6

Non-contact Body Infrared Thermometer Precision

HALIDODO-HW-7-Red-Light-Therapy-for-Body-fig-7

ADVICE FOR THE 1ST USE

For stable and reliable results, it is essential to check the Non-contact Body Infrared Thermometer and change as needed, as follows:
1st step: take the temperature of a person using a conventional thermometer, you will get 37.5°C (99.5° F) for instance.
2nd step: take the temperature of the same person using the Non-contact Body Infrared Thermometer keeping the 5 to 15 cm (2 in to 5.9 in) distance between the thermometer and the forehead (Take care to remove any obstacle which could alter the measurement (hair, perspiration.).
If you get 37.5°C (99.5° F), the Non-contact Body Infrared Thermometer is properly set and ready for use. If you get a lower temperature, 36.4°C (97.4°F) for example, your difference is 1.1°C (2.2°F). You should adjust the temperature on the Non-contact Body Infrared Thermometer and add the difference, i.e. 1.1°C (2.2°F). To do it, press the “MODE” button for 2 seconds, the screen displays F1, press “MODE” button again until you get F3. Press “UP” button in order to add the difference (in our example, 1.1°C-2.2°F).
3rd step: To check, take the temperature again using the Non-contact Body Infrared Thermometer.

USE

Install battery
For the first use or when inserting new batteries wait 10 minutes for the warm-up of the apparatus and when inserting the new batteries.
If the device is not used for a long time, once you turn it on again, the device will test the room temperature first and will delay turning on for one or two seconds.
Aim towards the forehead (see the diagram below for the positioning), from a distance of 5cm(2in), press the measuring key, the temperature is displayed immediately. Making sure there is no hair, perspiration, cosmetics, or cap covered on the forehead.
When the room temperature is a significant difference, or there is perspiration on the forehead, You can take the temperature behind the ear lobe. Making sure there is no hair, perspiration, cosmetics, or cap covered.

MEASURING OPERATION

Choosing The Temperature Unit F1 Function
Press the “MODE” button for 2 seconds the screen displays: F1. Select “DOWN” for degrees Celsius, and “UP” for degrees Fahrenheit.
Alarme Setup – F2 Menu
Press the “MODE” touch for 2 seconds, and the screen displays: F1. Press twice the “MODE” touch to get F2. Select “UP” to increase the threshold by 0.1°C (0.1°F), and “DOWN” to reduce it by 0.1°C (0.1°F).
Note: The alarm threshold default value is 38°C (100.4°F).
Total Difference – F3 Menu
To adjust the total variation of your Non-contact Body Infrared Thermometer. Press the “MODE” button for 2 seconds, and the screen displays: F1. Press the “MODE” button two times to get F3. Select “UP” to increase the difference by 0.1°C (0.1°F), and ‘DOWN” to reduce it by 0.1°C (0.1°F).In the cases of seasonal or environmental changes, verification and adjustment should be carried out.
Note: This function is only effective Body
Buzzer ON/OFF – F4(F3) Menu
Press the “MODE” button for 2 seconds, and the screen displays: F1. Press three(two) times the “MODE” buttons to get F4(F3). Select “UP” to open the buzzer (a sound icon * is displayed on the LCD screen), and press “DOWN” to stop it (the icon disappears).
Exiting The Setting Mode
Press the “MODE” button until the screen turns off.
The Non-contact Body Infrared Thermometer is specially designed to take the body temperature of a human being. For this, use the Body mode. Measurement range for Body mode: 32 to 42.5°C (86 to 108°F) You can also use the Non-contact Body Infrared Thermometer to measure the temperature of an area or an object, a food, a liquid or a room temperature. For this, use the Surface mode. Measurement range for Surface mode: 0 to 60°C (32 to 140°F) the internal body
Important: The area temperature differs from temperature. To obtain the internal temperature always use the Body mode. Please make sure to select the Body mode for an internal temperature reading and the Surface mode for an external area reading (bottle, bath, room..).
Data Memory
Data memory automatically after temperature measurements, which will display at the right corner of the LCD. Press the “UP” or “DOWN” button to display the last temperature measurement. Under the condition of power off, press the “UP” and “DOWN” buttons together for two seconds, to display the last temperature measurement. In this mode if change the order number to 0 and press the “MODE” button, then delete all memory data.
Changing The Batteries
Display: when the LCD screen displays “ “, the battery is used.
Operation: Open the lid and change the batteries, taking great care with the correct positioning. A mistake with this could cause damage to the apparatus and compromise the guarantee of your Non-contact Body Infrared Thermometer. Never use rechargeable batteries. Use only batteries for single usage. Remove the battery from the instrument if it is not required for extended periods of time in order to avoid damage to the thermometer resulting from a leaking battery.
Longevity Use
The Non-contact Body Infrared Thermometer was conceived for intense and professional use, its longevity is guaranteed for 40000 takings.

Advice

The protective glass over the lens is the most important and fragile part of the thermometer, please take great care of it.
Do not recharge non-rechargeable batteries, and do not throw them in the fire.
Do not expose the thermometer to sunlight or water.

Maintenance and Cleaning

The Infrared Sensor is the most precise part, must be protected carefully.
Clean the device with a cotton bud lightly moistened with 70% alcohol.
Do not clean the device with corrosive detergent.
Keep the device avway from water or other liquid.
Store the device in a dry environment, and keep it away from dust and direct sunlight.

TROUBLESHOOTING

If you happen to have one of the following problems while using your non- contact forehead IR thermometer please refer to this breakdown service guide to help resolve the problem. If the problem persists please contact our customer service. The screen displays the body temperature inferior to 32°C (89.6°F) If you’re on the Surface mode the 32°C(89.6° F) temperature displayed is showing the external temperature that your body releases.

The screen displays the message “HI” When using the Non-contact Body Infrared Thermometer the message Hl can show on the screen. The analysis is above the measurement range selected, either superior to 42.5°C (108°F) in Body mode or superior to 60°C (140°F) in Surface mode.
The screen displays the message “LO” When using the Non-contact Body Infrared Thermometer the message Lo can show on the screen. The temperature analyzed is under the measuring range selected, either less than 32°C (90°F) in Body mode or less than 0°C (32°F) in Surface mode.

This message is displayed in various cases please find below a list of the main cases.

HALIDODO-HW-7-Red-Light-Therapy-for-Body-fig-12

THIS APPLIANCE CONFORMS TO THE FOLLOWING STANDARDS

EN 980: Graphical symbols for use in the labeling of medical devices
EN 1041: Information supplied by the manufacturer with medical devices
EN 60601-1 : Medical electrical equipment
Part 1: General requirements for safety (IEC:60601-1:1998)
EN 60601-1-2: Medical electrical equipment
Part 1-2: General requirements for safety Collateral standard Electromagnetic compatibility Requirements and test (IEC 60601-1-2:2001)

EMC STATEMENT

This device has been tested and homologated in accordance with EN60601-1-2:2007 for EMC. This does not guarantee in any way that the device will not be affected by electromagnetic interference. Avoid using the device in high electromagnetic environments.
The MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC and needs to be installed and put into service according to the EMC information provided in the ACCOMPANYING DOCUMENTS.
The manufacturer reserves the right to alter the specifications of the product without prior notification. The manufacturer allows himself the right to modify without a preliminary opinion the technical specifications of the product.

FAQs

Can I use this thermometer with my children?****

Yes, you can. But you must pay attention to the temperature range.

How to read the temperature?****

You can read the temperature on the LCD screen.

How long does it take to get a reading?****

It will take about 1 second to get a reading.

Is this thermometer waterproof?****

No, it is not waterproof, so please don’t put it into water or any liquid.

What kind of batteries are needed for the thermometer?****

requires 2 AAA batteries.

This thermometer was produced where?****

Produced in China

Does this thermometer genuinely emit an audible beep after it has finished its task so that you can hear it?****

Yes. An audible “beep beep” can be heard. It happens immediately after hitting the trigger.

Why has it remained on 97.1 all day long?****

You must either contact the manufacturer or return the thermometer. Your query won’t be answered by a different customer.

Will the wrist temperature be measured accurately?****

The wrist has not been attempted.

How often can you safely use red light therapy?****

Depending on the ailment, red light treatment can be utilized twice or three times per week for 10 to 20 minutes at a time, for one to four months.

How long does it take to see the effects of red light therapy?****

Red light therapy begins to produce results right away, and they continue to improve with each session. After 8 to 12 weeks of regular use, long-term problems usually start to improve.

Is Full body red light therapy good for you?****

When used in conjunction with a balanced diet and regular exercise, full-body red light treatment can reverse the harm caused by free radicals and assist in restoring the equilibrium between antioxidants and free radicals. Even if you are not in pain, red light treatment is a great supplement to a healthier lifestyle.