TITAN OD-R24SDSZ01 Built-In Outdoor Refrigerator in Stainless Steel User Guide

TITAN OD-R24SDSZ01 Built-In Outdoor Refrigerator in Stainless Steel

Welcome To Titan Appliances
Congratulations on purchasing your Titan appliance! We at Titan offer quality products that compliment your lifestyle.
To learn more about our products please visit our website at www.titan- appliances.com.
This manual contains information on how to install, use and maintain your appliance to perform at its peak efficiency.
To safely transport your appliance in future, please save the original product packaging.
Before contacting customer service, please ensure that you have done the following:

Proof of Purchase

For future reference, please write down the model number and serial number below.

• Model Number:
• Serial Number:
• Date of Purchase:

Both the model number and the serial number are located on the product label on the back of your unit and are needed for service under warranty.
We suggest stapling your receipt to this manual as it serves as the proof of your purchase and will be needed for service under your warranty.

Before contacting customer service, please ensure that you have done the following：

1. If the unit is damaged upon receipt, please contact the retailer or dealer that sold you the appliance right away.
2. Please read this owner’s manual and follow the instructions and recommendations to properly install, operate and maintain the unit.
3. Always refer to the trouble-shooting section of this owner’s manual as it contains valuable information and suggestions on how to solve common issues.
4. For the latest information on this product and additional troubleshooting suggestions please visit our website at www.titan-appliances.com
5. Should you need any help on the warranty service please contact our customer services at service@titan-appliances.com

Contacts:
Titan Products, LLC
service@titan-appliances.com

SAFETY AND WARNING

Instructions Before Using Your Appliance.
Before use, make sure all packaging labels and materials are removed from the unit. Be sure to keep track of all included parts and pieces before discarding packaging materials. It is advised that you keep the original box and packaging materials in case you are ever to move or ship the appliance in the future.
Clean the interior surface with a clean soft cloth. Allow the unit to stand for at least 24 hours before use; this allows the cooling system time to settle from transit.
This owner’s manual is provided for reference use only. Specifications may change without prior notice. Refer to the product label on the back of your unit for the latest technical information.

Important Safety Instructions

Improper handling can cause serious damage to the Titan appliance and/or injury to the user.
This appliance is designed for domestic indoor use only. Use of the unit for industrial or commercial or any other purposes will void the warranty.

NOTICE
Please read all instructions before installing, operating, or servicing the appliance.

Use this appliance for its intended purpose only and follow these general precautions with those listed throughout this guide:

SAFETY ALERT DEFINITIONS

Throughout this guide are safety items labeled with a Danger, Warning or Caution based on the risk types:

• DANGER
  Danger means that failure to follow this safety statement will result in severe personal injury or death.

• WARNING
  Warning means that failure to follow this safety statement could result in serious personal injury or death.

• CAUTION
  Caution means that failure to follow this safety statement may result in minor or moderate personal injury, property or equipment damage.

• DANGER
  This unit contains R600a (Isobutane) which is a flammable hydrocarbon. It is safe for regular use. Do not use sharp objects to expedite defrosting. Do not service without consulting the “R600a specifications” section included in the User Guide. Do not damage the refrigerant circuit.

• WARNING
  Service must be done by factory authorized service personnel. Any parts shall be replaced with like components. Failure to comply could increase the risk of possible ignition due to incorrect parts or improper service.

• DANGER
  RISK OF CHILD ENTRAPMENT. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so children may not easily climb inside.
  If the unit is being removed from service for disposal, check and obey all federal, state and local regulations regarding the disposal and recycling of refrigeration appliances, and follow these steps completely:

1. Remove all consumable contents from the unit.
2. Unplug the electrical cord from its socket.
3. Remove the door(s) and shelves(s).

INSTALLATION

Environmental Requirements

This model is intended for indoor/interior applications only and is not to be used in installations that are open/exposed to natural elements.
This unit is designed to operate between 50°F and 95°F.
Higher ambient temperatures may reduce the unit’s ability to reach low temperatures and/or reduce ice production on applicable models.
For best performance, keep the unit out of direct sunlight and away from heat generating equipments.
In climates where high humidity and dew points are present, condensation may appear on outside surfaces.
This is considered normal and does not affect the appliance’s performance.
The condensation will evaporate when the humidity drops.

CAUTION
Damages caused by ambient temperatures of 40°F (4°C) or below are not covered by the warranty.

VACACTION REQUIREMENTS

WARNING

• Short vacations: Leave the appliance operating during vacations for less than three weeks.
• Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.

MOVING REQUIREMENTS

WARNING

• Make sure the appliance is empty.
• Secure the shelves with tape.
• Secure the door with tape.
• Turn the adjustable foot up to the base to avoid damage.
• Protect the outside of the appliance with a blanket or similar item.
• Be sure the appliance stays in the upright position during transportation.
• If the appliance is placed on its back or side during transportation, upon reaching the destination, allow it to remain upright for 6 hours before plugging in to avoid damage to internal components.

Electrical

WARNING
SHOCK HAZARD — Electrical Grounding Required. Never attempt to repair or perform maintenance on the unit until the electricity has been disconnected.
Never remove the round grounding prong from the plug and never use a two-prong grounding adapter.
Altering, cutting or removing power cord, removing power plug, or direct wiring can cause serious injury, fire, loss of property and/or life, and will void the warranty.
Never use an extension cord to connect power to the unit.
Always keep your working area dry.

NOTICE
Electrical installation must observe all state and local codes.
This unit requires connection to a grounded (three-prong), polarized receptacle that has been placed by a qualified electrician.
The unit requires a grounded and polarized 115 V, 60 Hz, 1.5A power supply (normal household current).
An individual, properly grounded branch circuit or circuit breaker is recommended.

Cutout Dimensions

PREPARE SITE
Your Titan product has been designed for either free-standing or built-in installation.
When built-in, your unit does not require additional air space for top, sides, or rear.
However, the front grille must NOT be obstructed, and clearance is required for an electrical connection in the rear.

CAUTION
Unit can NOT be installed behind a closed cabinet door.

When installing the cooler under a counter, follow the recommended spacing dimensions shown.

• The cabinet should allow at least 24” for the width and 35” for the height to accommodate the beverage cooler.
• Once you are ready to install the unit, you must adjust the feet to level the cooler.

Installation Clearance Requirements

When installing the cooler under a counter, follow the recommended spacing dimensions shown.

• To ensure proper service access and ventilation, allow at least 2-3” of clearance at the back as shown in the diagram.
• The installation should allow the unit to be pulled forward for servicing, if necessary.
• The power cable is located on the back right of the unit and has a length of 72” to accommodate multiple outlet locations.
• An installation next to a wall will require a minimum 2-1/4″ door clearance to accommodate the handle

Units have a zero clearance for the door to open 90°, when installed adjacent to cabinets.

Product Dimensions

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>