MAXIM LIGHTING 88950WT CounterMax 120V Slim LED UC White Tunable Instruction Manual
- June 8, 2024
- MAXIM LIGHTING
Table of Contents
Product Name: CounterMax 120V Slim LED UC White Tunable
ITEM NUMBER: 88950WT 88951WT 88952WT 88953WT 88954WT 88955WT
88950BZ 88951BZ 88952BZ 88953BZ 88954BZ 88955BZ
Please consult a qualified electrician for hanging fixture and wiring.
Light Source : LED Integrated 3W/6W/9W/12W/15W/18W 120V/60Hz
Made in China
Before Getting Started
Read the instructions carefully prior to assembling the product.
When you open the package with a sharp tool like a cutter knife, be careful
not to damage the components inside.
Carefully remove all packaging materials and retain for future use.
Keep all hardware parts and packaging out of reach of small children.
Choose a clean, level, spacious assembly area.
Avoid hard surfaces that may damage the product.
Ensure that you have all required contents for complete assembly.
Take care when lifting. Assemble the product in close proximity to where you
intend to position the item.
Do not over tighten the screws and bolts as this may damage the threads.
Do not let children play with this product.
Risk of suffocation!
Keep any packaging materials away from children.
Lamp Care Instructions
Carefully read through the instruction sheet before assembly and using the
product.
Caution there is a risk of shock. Disconnect from power source before
assembling or cleaning.
WARNING: Wires need to be connected to driver found in canopy and should
not be connected directly to power source or a short may occur.
Only use the recommended bulb type and do not exceed the maximum wattage as it
could cause fire.
Do not plug the product in if cord is torn or frayed.
Cleaning & Maintenance
On polished finishes, often using talc powder reduces the appearance of
fingerprints and other smudges.
For respective shade surfaces, use the appropriate cleansers, i.e. glass
cleaner, acrylic polish, and wood polish.
Clean with soft cloth and a mild detergent.
DO not use abrasive cleaner.
Periodically (every 90 days) make sure that the screws are fully tightened.
Prolonged exposure to heat sources may cause glazing, melting and scorching,
or even cause color to fade.
’Contents.
Before getting,started,ensure the package contains the following
components:
WARNING: LED Lightbar can only be lit up by 120V Control Dimmer Tuner
connected via Interlik cord, do not connect tothe power source or a short
circuit may occur.
Installation Instructions
- Mark the mounting position on the surface to align the LED Lightbars, and the mounting position for 120V Control Dimmer Tuner.
- Align and secure the mounting clips to the surface.
- Gently push the LED Lightbar into mounting clips.
- Connect the LED Lightbars to create a continuous row. Be careful total wattage of LED Lightbar can not exceed 54 Watts.
- Check the connections and turn the 120V Control Dimmer Tuner on.
Lightbar , 120V Control Dimmer Tuner wiring diagram
- Please make sure the total wattages of the single continued connected Lightbar do not exceed 54W
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>