BOSCH BT-VS BT-VS-XSW-SEC Security Systems From Product Management Telephone Grasbrun Instructions
- June 8, 2024
- Bosch
Table of Contents
BOSCH BT-VS BT-VS-XSW-SEC Security Systems From Product Management
Telephone Grasbrun
Release Letter
| Product: | **DIVAR IP all-in-one 7000 generation 3 Family (DIP-73*)** |
|---|---|
| Version: | **DIP-73 Installer for BVMS 10.1.1 MR1** |
General
The Installer combines a number of software components, which are applicable to the above-mentioned product(s). It can be used for initial software installation or as an upgrade of an earlier version, which is already installed on the system.
Restrictions Known Issues
- Access to the administrative BVRAdmin account is necessary in order to install software packages.
- If several BoschAppliance folders are found by the DIVAR IP Software Center application on different drives, the highest version package will be used.
New subcomponent software versions
- DIVAR IP Software Center 2.0.113
- BVMS 10.1.1.12
- Video Recording Manager 3.83.0045
- Video Streaming Gateway 7.2.0.44
- Transcoding Service 07.10.0037
New Features
-
BVMS
New Video Management System features are listed in the Bosch VMS release notes. -
VRM
New VRM features are listed in the VRM release notes.
Applied Changes/Bug Fixes
- Installation packages appear in incorrect order in DIVAR IP Software Center 2.0.109 – Fixed.
- Patch for BVMS 10.1.1.12 – Security Issue – 350403 is included in the package.
Installation Notes
Initial system setup
DIVAR IP all-in-one 7000 3rd generation products allow for software installation packages to be imported directly during initial system setup. The following steps have to be performed in order to use an updated software installation package on a DIVAR IP all-in-one 7000 3rd-generation video management appliance:
-
Download and unzip the software installation package (for example, DIP-73 Installer for
BVMS 10.1.1 MR1) archive from http://www.boschsecurity.com. -
Copy the folder structure onto a USB drive, so that the BoschAppliance folder is at the root level Note: make sure that the complete folder structure is copied.
-
Connect the USB drive to the DIVAR IP all-in-one 7000 system during initial setup, while logging in as BVRAdmin
-
Proceed with the system setup until the DIVAR IP Software Center application is opened. Provide BVRAdmin user credentials.
-
In the Operation mode selection screens, choose the software version of the package that shall be installed on the system. Click the Install button at the bottom of the page.
Depending on the selected Operation mode, the system might require several reboots. After reboot, log in to the system and provide credentials to the DIVAR IP Software Center application.
Upgrade
-
Download and unzip the software installation package (for example, DIP-73 Installer for
BVMS 10.1.1 MR1) archive from http://www.boschsecurity.com. -
Copy the folder structure onto a USB drive, so that the BoschAppliance folder is at the root level Note: make sure that the complete folder structure is copied.
-
Connect the USB drive to the DIVAR IP all-in-one 7000 system
-
Run the DIVAR IP Software Center application from the BVMS kiosk mode or from the BVRAdmin user desktop. Provide BVRAdmin user credentials.
-
In the Update and Upgrade screen, inspect the currently installed and available upgrade version numbers, and press the Upgrade button.
Notes:
- During initial boot and installation, the system must be connected to a network.
History
DIP-73 Installer for BVMS 10.1.1 subcomponent software versions
- DIVAR IP Software Center 2.0.104
- BVMS 10.1.1.12
- Video Recording Manager 3.83.0021
- Video Streaming Gateway 7.2.0.44
- Transcoding Service 07.10.0037
BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany. http://www.boschsecurity.com.