Superior Life PQL-556178WEM LED Spec-Select Wrap with 8w Em Battery Instruction Manual

June 4, 2024
Superior Life

Superior Life PQL-556178WEM LED Spec-Select Wrap with 8w Em Battery

INSTALL INSTRUCTIONS

PLEASE FIND A QUALIFIED ELECTRICIAN FOR INSTALLATION. Please read the instructions before you install and use the luminaire.

WARNING, CAUTIONS AND OPERATING INSTRUCTIONS
  • To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels.
  • Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
  • Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed electrician.
  • For the installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code.
  • To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
  • Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

WARNING: RISK OF FIRE OR ELECTRICAL SHOCK

  • Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.

  • Turn off the power when you perform any maintenance.

  • Verify that supply voltage is correct by comparing it with the luminaire
    label information.

  • All wiring connections should be capped with UL approved wire connectors.

CAUTION: RISK OF INJURY

  • Avoid direct eye exposure to the un-louvered light source while it is on.

  • Account for small parts and destroy packing material, as these may be
    hazardous to children.

  • Risk of burn. Disconnect power and allow fixture to cool before handling
    fixture.

  • Green ground screw provided in proper location. DO NOT RELOCATE.

  • Minimum 90° supply conductors. · Suitable for Dry or Damp locations.

⚠ WARNING DISCONNECT POWER BEFORE INSTALLING OR SERVICING.

SURFACE MOUNTING

PQL-556178WEM LED Spec-Select Wrap Installation
illustration

  1. Remove lens and loosen fasteners at both ends of the top enclosure.

  2. Make electrical connections according to the general wiring diagram and local electrical codes through the Concealed Outlet Box. (Fig. 1)
    PQL-556178WEM LED Spec-Select Wrap Installation
illustration

  3. Mount luminaire to surface with self tapping screws, use the mounting holes on each end of the fixture housing. (Fig. 2)
    PQL-556178WEM LED Spec-Select Wrap Installation
illustration

  4. Replace top enclosure and lens. Check to make sure the lens is completely secure along the entire length of the fixture.

FIELD ADJUSTABLE WATTAGE & CCT

The end users may adjust the color temperature and lumen output, respectively, by the two slide switches integrated into the side of the fixture. Each switch has 3 options (left, middle and right ), each position corresponds to 1 of 3 color temperatures (Warm White, Cool White, and Sky-Brite®) and 1 of 3 wattages, which can be adjusted to the desired combination.

Default Settings: 40W, 5000K

  • Switches are located on the side of the fixture. (Fig. 3)
    PQL-556178WEM LED Spec-Select Wrap Installation
illustration

  • Select a wattage and color temperature

GENERAL WIRING DIAGRAM

PQL-556178WEM LED Spec-Select Wrap Installation
illustration

WARNING DISCONNECT POWER BEFORE INSTALLING OR SERVICING.

CHAIN MOUNTING WITH V-HOOK (Sold Separately):
  1. Mount V-Hooks to the luminaire. (Fig. 4)
    PQL-556178WEM LED Spec-Select Wrap Installation
illustration

  2. Make electrical connections according to the General Wiring Diagram and local electrical codes.

  3. Hang luminaire up with chain.

CABLE MOUNTING (Sold Separately):
  1. Mount cable to the luminaire. Wrap one end of cable to the beam, then insert into the hasp, adjust the cable to the desired height. (Fig. 5)
    PQL-556178WEM LED Spec-Select Wrap Installation
illustration

  2. Make electrical connections according to the General Wiring Diagram and local electrical codes.

PREMIUM QUALITY LIGHTING®•www.PQLighting.com
© P.Q.L., Inc. • 2285 Ward Avenue • Simi Valley, CA 93065 • 800-323-8107

Specifications subject to change without notice. Photos and line drawings may not be to scale and are for general reference only.

Superior Life-Logo.png

Documents / Resources

| Superior Life PQL-556178WEM LED Spec-Select Wrap with 8w Em Battery [pdf] Instruction Manual
PQL-556178WEM LED Spec-Select Wrap with 8w Em Battery, PQL-556178WEM, LED Spec-Select Wrap with 8w Em Battery, LED Spec-Select Wrap, Wrap
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Superior Life User Manuals

Related Manuals