SENXINGYAN M2-Pro Wireless Bluetooth Speaker User Manual
- June 8, 2024
- SENXINGYAN
Table of Contents
SENXINGYAN M2-Pro Wireless Bluetooth Speaker
Features
- Wireless Bluetooth speaker
- Memory function, play from the breakpoints
- Support disk
- Built-in lithium battery
- Built-in microphone supports hands-free calls.
- Support MP3 music formats and codecs
- Two tandem function
- FM function
Charging Function
With built-in overcharge protection circuit, it can be connected to the computer or charger for a long time, and it can be fully charged in about four hours. Due to the different playback volume and type, the specific playback time will vary.
Technical Specification
- Wireless Standard: 5.0
- Output Power: 2 * 15 W
- Working Time: 30H
- Transmission Distance: 20m
- Charging Time: 4H
- Frequency Effect: 100Hz 18KHz
- Internal Speaker: 2 * 60MM
- Input Power: DC5V 1mh
- Battery Capacity: 5200mAh
Device Connection
Long press the speaker to start, turn on the Bluetooth function of the phone, search for and connect to “M2 Pro”, and then automatically connect to your phone every time you start the speaker, and automatically turn off the speaker 15 minutes after disconnecting
TWS Pairing:
Turn on the two speakers at the same time, press and hold the play button (M)
of any one of them, and then reconnect to your phone after comple- tion.
Tip: When using the TWS function, please clear the records you have connected
before, otherwise the speaker will be directly connected to the last Connected
device after startup.
FM Mode:
After starting, click the M button to switch to FM mode. Since this function
is an additional function, please use it where the signal is good. If the
signal reception is insufficient at your location, you can try to insert the
Micro USB data cable input port((60) into the speaker as an antenna to enhance
signal reception.
Note: Please use the S/1A charger when charging the product.
INSTALLATION
- Long press to turn on / off
- Pause/ Play / double click dialing
- Click the previous song/Long press to increase the volume
- Click the next song/long press to decrease the volume
- Short press to switch mode/long press for TWS pairing function
- DC5V interface, red light when charging
- 3.5mm audio inteface
- U disk data read-in, it can be used as mobile power output
- TF card interface, maximum read 32G memory
If You Have Any Questions, Please Feel Free To Contact Us, We Will Take 24
Hours A Day To Address Any Of Your Needs.
E-mail: SenXingYan@outlook.com
The company reserves the right of final interpretation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>