Shelly Duo Smart LED WiFi Bulb User Manual

: June 8, 2024
: Shelly

Table of Contents

Duo Smart LED WiFi Bulb
Specification
Technical Information
Installation Instructions
Declaration of conformity
INITIAL INCLUSION
SHELLY APPLICATION
THE EMBEDDED WEB INTERFACE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SHELLY DUO SMART BULB
User Manual

Duo Smart LED WiFi Bulb

The Shelly DUO (WW/CW or RGBW model) smart WiFi LED bulb by Allterco Robotics is intended to be installed into a standard light socket (E27/E26 or GU10) in order to change the white temperature or color (depending on model) and to dim the light. Shelly may work as a standalone device or as an accessory to a home automation controller.

Specification

Power supply	110-230V ±10% 50/60Hz AC
Socket	E26/E27
Power Rating	9W
Brightness	Up to 800 Im
Color Temperature	WW/CW (2700K-6500K); RGBW
Beam Angle	190°
Working temperature	From -20°C to 40°C
Complies with EU standards	RED 2014/53/EU, LVD 2014/35/

Technical Information

Control through WiFi from a mobile phone, tablet, PC, automation system or any other device supporting HTTP and/or UDP protocol
Microprocessor management
Controlled elements: multiple LED diods
Shelly may be controlled by an external switch

⚠CAUTION! Danger of electrocution. Plugging the device to the power grid has to be performed with caution.
⚠CAUTION! Do not allow children to play with the device.
Keep the devices for remote control of Shelly (mobile phones, tablets, PCs) away from children.
⚠CAUTION! Please handle with care! The Shelly® DUO is FRAGILE!
Introduction to Shelly
Shelly® is a family of innovative Devices, which allow remote control of electric appliances through mobile phone, PC or home automation system. Shelly® uses WiFi to connect to the devices controlling it. They can be in the same WiFi net- work or they can use remote access (through the Internet).
Shelly® may work standalone, without being managed by a home automation controller, in the local WiFi network, as well as through a cloud service, from everywhere the User has Internet access.
Shelly® has an integrated web server, through which the User may adjust, control and monitor the Device. Shelly® has two WiFi modes – access Point (AP) and Client mode (CM). To operate in Client Mode, a WiFi router must be located within the range of the Device. Shelly® devices can communicate directly with other WiFi devices through HTTP protocol.
An API can be provided by the Manufacturer. Shelly® devices may be available for monitor and control even if the User is outside the range of the local WiFi network, as long as the WiFi router is connected to the Internet. The cloud function could be used, which is activated through the web server of the Device or through the settings in the Shelly Cloud mobile application.
The User can register and access Shelly Cloud, using either Android or iOS mobile applications, or any internet browser and the web site: https://my.Shelly.cloud/.

Installation Instructions

⚠CAUTION! Danger of electrocution. Before installing the Device into the light socket please check if it has been powered off.
⚠CAUTION! Before beginning the installation please read the accompanying documentation carefully and completely.
Failure to follow recommended procedures could lead to malfunction, danger to your life or violation of thelaw.
Allterco Robotics is not responsible for any loss or damage in case of incorrect installation or operation of this device.
⚠CAUTION! Use the Device only with power grid which comply with all applicable regulations.
Short circuit in the power grid connected to the Device may damage the Device.
⚠CAUTION! Please check the working voltage of the device and the supplied voltage of your power grid before installing the device!
Installing the device to a non recommended power supply may lead to malfunction, danger to your life or violation of the law. Allterco Robotics is not responsible for any loss or damage in case of incorrect installation or operation of this device.
⚠RECOMMENDATION! The Device may be connected to and may control electric circuits and light sockets only if they comply with the respective standards and safety
norms.

Declaration of conformity

Hereby, Allterco Robotics EOOD declares that the radio equipment type Shelly DUO is in compliance with Directive 2014/53/EU, 2014/35/EU, 2004/108/WE, 2011/65/UE. The full text of the EU declaration of conformity is available at the following internet address:
https://shelly.cloud/declaration-of-conformity/
Manufacturer: Allterco Robotics EOOD
Address: Sofia, 1407, 103 Cherni vrah Blvd.
Tel.: +359 2 988 7435
E-mail: support@shelly.cloud
Web: http://www.shelly.cloud
Changes in the contact data are published by the Manufacturer at the official website of the Device:
http://www.shelly.cloud
The User is obliged to stay informed for any amendments of these warranty terms before exercising his/her rights against the Manufacturer.
All rights to trademarks She® and Shelly®, and other intellec-tual rights associated with this Device belong to Allterco Robotics EOOD.

INITIAL INCLUSION

Install the Shelly to the light socket. Press the switch/button to which Shelly is connected. The Shelly should turn on. Press the switch/button again and Shelly will turn off.
You may choose if you want to use Shelly with the Shelly Cloud mobile application and Shelly Cloud service. You can also familiarize yourself with the instructions for Management and Control through the embedded Web interface.
CONTROL YOUR HOME WITH YOUR VOICE
All Shelly devices are compatible with Amazon Echo and Google Home. Please see our step-by-step guide on: https://shelly.cloud/compatibility

SHELLY APPLICATION

https://shelly.cloud/app_download/?i=shelly_generic

Shelly Cloud gives you opportunity to control and adjust all Shelly® Devices from anywhere in the world. You only need an internet connection and our mobile application, installed on your smartphone or tablet.
Registration
The first time you load the Shelly Cloud mobile app, you have to create an account which can manage all your Shelly® devices.
Forgotten Password
In case you forget or lose your password, just enter the e-mail address you have used in your registration. You will then receive instructions to change your password.
⚠WARNING! Be careful when you type your e-mail address during the registration, as it will be used in case you forget your password.
First steps
After registering, create your first room (or rooms), where you are going to add and use your Shelly devices.
Shelly Cloud gives you opportunity to create scenes for automatic turning on or off of the Devices at predefined hours or based on other parameters like temperature, humidity, light etc. (with available sensor in Shelly Cloud).
Shelly Cloud allows easy control and monitoring using a mobile phone, tablet or PC.

Device Inclusion
To add a new Shelly device, connect it to the power grid.
Step 1
Install your Shelly into the light socket and turn the light on.
⚠WARNING! In case the Device has not created its own Wi-Fi network with SSID like ShellyBulbDuo-35FA58 for the white model or shellycolorbulb-35FA58 for the colored version check if you have power connected to Shelly. If you do not see an active WiFi network with SSID like ShellyBulbDuo-35FA58 or shellycolorbulb-35FA58, reset the Device. If the Device has been powered on, you have to power it off and on again 5 consecutive times. Or if you have a switch/button connected to the Device, press it 5 consecutive times. When the light starts to flash Shelly should return to AP Mode. For Shelly duo RGBW – light will start to flash in red, next time you switched of and on it will light in blue – this mean that the bulb is in AP more, If not, please repeat or contact our customer support at support@shelly.cloud
*Upon each OFF state, please wait 2-3 seconds.
Step 2
Choose “Add Device”. In order to add more Devices later, use the app menu at the top right corner of the main screen and click “Add Device”. Type the name (SSID) and password for the WiFi network, to which you want to add the Device.

Step 3
If using iOS: you will see the following screen: Press the home button of your iPhone/iPad/iPod. Open Settings > WiFi and connect to the WiFi network created by Shelly, e.g. shelly1-35FA58.
If using Android your phone/tablet will automatically scan and include all new Shelly Devices in the WiFi network that you are connected to.

Upon successful Device Inclusion to the WiFi network you will see the following pop-up:

Step 4
Approximately 30 seconds after discovery of any new Devices оn the local WiFi network, а list will be displayed by default in the “Discovered Devices” room.

Step 5
Enter Discovered Devices and choose the Device you want to include in your account.

Step 6
Enter a name for the Device (in the Device Name field).
Choose a Room, in which the Device has to be positioned.
You can choose an icon or add a picture to make it easier to recognize. Press “Save Device”.

Step 7
To enable connection to the Shelly Cloud service for remote control and monitoring of the Device, press “YES” on the following pop-up.

Shelly devices settings
After your Shelly device is included in the app, you can control it, change its settings and automate the way it works.
To switch the Device on and off, use the Power button.
To enter at the details menu of the Device, click on it’s name.
From the details menu you may control the Device, as well as edit its appearance and settings.
You can set Shelly Duo RGBW to work on two ways:

Color mode – on this mode you can select a color at your choice. As well you can turn it off and select the intensity of the light. In color mode you can chose also different light effects:
– Off- effects will be off
– Meteor Shower
– Gradual change
– Flash
White mode – work as a normal white color bulb. As well you can select the intensity and switched it off

In the White version of the bulb you can control the color temperature and the intensity as shown on figure:

Timer – Тo manage the power supply automatically, you can use

Auto OFF: After turning on, the power supply will automatically shutdown after a predefined time (in seconds).
A value of 0 will cancel the automatic shutdown.
Auto ON: After turning off, the power supply will be automatically turned on after a predefined time (in seconds). A value of 0 will cancel the automatic power-on.
Weekly Schedule – This function requires an Internet connection.
To use Internet, your Shelly has to be connected to a local WiFi network with an active internet connection.
Shelly may turn on/off automatically at a predefined time, at sunrise/sunset, or at a specified time before or after sunrise/ sunset. Multiple schedules are possible.
Night Mode – With this mode you can set a period of time and level of brightness, in which any turning on will set the brightness to the predefined level. You must select a start & end time, with the brightness level.

Internet/Security

WiFi Mode – Client: Allows the device to connect to an avail- able WiFi network. After typing the details in the respective fields, press Connect.
WiFi Client Backup: Add a backup WiFi network, in case your primary one becomes unavailable.
WiFi Mode – Acess Point: Configure Shelly to create a Wi-Fi Access point. After typing the details in the respective fields, press Create Access Point.
Cloud – Enable or Disable connection to the Cloud service.
Restrict Login – Restrict the web interface of Shely with a User- name and Password. After typing the details in the fields, press Restrict Shelly.

Settings
Power on default mode – this sets the default output state when shelly is powered.

On: configure shelly to turn on, when it has power.
Off: configure shelly to turn off, when it has power.
Restore last mode: configure shelly to return to last state it was in, when it has power.

Transition time – set the time (in miliseconds), for which shelly duo goes from 0% to 100%. The value can be from 0 to 5000 ms.
Firmware update – update the firmware of shelly, when a new version is released.
Time zone and geo-location – enable or disable the automatic detection of time zone and geo-location.
Factory reset – return shelly to its factory default settings.
Device information – here you can see the device ID(unique id of Shelly), device ip(the ip of shelly in your wi-fi network).

THE EMBEDDED WEB INTERFACE

Even without the mobile app the Shelly device can be set and controlled through a browser and WiFi connection of a mobile phone, tablet or PC.

Abbreviations used

Shelly-ID – the unique name of the device. It consists of 6 or more characters. It may include numbers and letters, for example 35FA58.
SSID – the name of the WiFi network, created by the device, for example shellycolor-35FA58.
Access Point (AP) – the mode in which the device creates its own WiFi connection point with the respective name (SSID).
Client Mode (CM) – the mode in which the device is connected to another WiFi network.

Installation/Initial inclusion
Step 1
Install Shelly DUO into the light socket and turn the light on.
⚠WARNING! If you don’t see the WiFi please fallow the step 1 from the device inclusion section of the guide.
Step 2
When the light turns on, Shelly has created an own WiFi network (own AP), with name (SSID) such as ShellyBulbDuo-35FA58. Connect to it with your phone, tablet or PC.
Step 3
Type 192.168.33.1 into the address field of your browser to load the web interface of the Shelly device.
Home Page
This is the home page of the embedded web interface. If it has been set up is correctly, you will see information about current power consumption, in Watts, Current state (on/off), current brightness level, current temperature of the light, power button, connection to Cloud, present time, settings.

Internet/Security

WiFi Mode – Client: Allows the device to connect to an available WiFi network. After typing the details in the fields, press Connect.
WiFi Client Backup: Add a backup WiFi network, in case your primary one becomes unavailable.
WiFi Mode – Acess Point: Configure Shelly to create a WiFi Access point. After typing the details in the fields, press Create Access Point.
Cloud – Enable or Disable connection to the Cloud service.
Restrict Login – Restrict the web interface of Shely with a Username and Password. After typing the details in the fields, press Restrict Shelly.
SNTP Server – You can set a custom SNTP Server. Type the URL address and press Save.
⚠ATTENTION! If you have entered incorrect information (wrong settings, usernames, passwords etc.), you will not be able to connect to Shelly and you have to reset the Device.
Timer – Тo manage the power supply automatically, you may use
Auto OFF: After turning on, the power supply will automatically shutdown after a predefined time (in seconds).
A value of 0 will cancel the automatic shutdown.
Auto ON: After turning off, the power supply will be automatically turned on after a predefined time (in seconds). A value of 0 will cancel the automatic power-on.
⚠WARNING! If you don’t see the WiFi please fallow the step 1 from the device inclusion section of the guide.
Weekly Schedule – This function requires an Internet connection.
To use Internet, your Shelly has to be connected to a local WiFi network with an active internet connection.
Shelly may turn on/off automatically at a predefined time, at sunrise/ sunset, or at a specified time before or after sunrise/ sunset. Multiple schedules are possible.
Night Mode – With this mode you can set a period of time and level of brightness, in which any turning on will set the brightness to the predefined level. You must select a start & end time, with the brightness level.
Settings
Power On Default Mode – This sets the default output state when Shelly is powered.
ON: Configure Shelly to turn ON, when it has power.
OFF: Configure Shelly to turn OFF, when it has power.
Restore Last Mode – Configure Shelly to return to last state it was in, when it has power.
Transition Time – Set the time (in miliseconds), for which Shelly Duo goes from 0% to 100%. The value can be from 0 to 5000 ms.
Time Zone and Geo-location – Enable or Disable the automatic detection of Time Zone and Geo-location.
Firmware Update – Update the firmware of Shelly, when a new version is released.
Factory
Reset – Return Shelly to its factory default settings.
Device Reboot – Reboots the device.
Device Information – Here you can see the:
Device ID – Unique ID of Shelly
Device IP – The IP of Shelly in your Wi-Fi network Additional Features – Shelly allows control via HTTP from any other device, home automation controller, mobile app or server. For more information about the REST control protocol, please visit www.shelly.cloud or send a request to developers@shelly.cloud