Shelly Dimmer 2 WiFi Smart Switch for Light Control User Manual
- June 8, 2024
- Shelly
Table of Contents
SHELLY DIMMER SMART DIMMING
Legend
- SW1 – Switch input 1 for on/off/dimming
- SW2 – Switch input 2 for on/off/dimming
- O – Output
- L – Line input (110-240V)
- N – Neutral input (Zero)
⚠CAUTION! When using the device without neutral, Shelly Dimmer 2 requires
at least 10W of power consumption, in order to operate.
If the connected light has a smaller power consumption, then Shelly Bypass is
required for the operation of the Device.
The Shelly smart WiFi dimmer by Allterco Robotics is intended to be installed
directly to your lights in order to control and dim the light. It is intended
to be mounted into a standard in-wall console, behind the light switches or
other places with limited space. Shelly may work as a standalone device or as
an accessory to a home automation controller.
⚠CAUTION! Shelly dimmer cannot be connected and operate a fan.
Doing so may cause damage to the unit or fan, including causing a fire!
⚠CAUTION! For multiple bulbs connected to one Dimmer 2, all bulbs need to
be equal in power load and technology!
Specification
- Power supply – 110-240V ±10% 50/60Hz AC
- Operational current – 0.1 – 1.1A
- Device temperature protection – 105°C
- Complies with EU standards – RE Directive 2014/53/EU, LVD 2014/35/EU, EMC 2004/108/WE, RoHS2 2011/65/UE
- Working temperature – from 0°C to 35°C
- Radio signal power – 1mW
- Radio protocol – WiFi 802.11 b/g/n
- Frequency – 2400 – 2483.5 MHz
- Operational range (depending on local construction) – up to 50 m outdoors, up to 30 m indoors
- Dimensions (HxWxL) – 42 x 36 x 14 mm
- Electrical consumption – < 1,5 W
- Supported light types – Incandescent and halogen light sources 1-220W, Dimmable LED 50-200VA/1W – 200W, Resistive-inductive loads ferromagnetic transformers 50-150VA
Technical Information
- Control through WiFi from a mobile phone, PC, automation system or any other Device supporting HTTP and/or UDP protocol.
- Microprocessor management.
- Shelly may be controlled by an external button/switch.
⚠CAUTION! Danger of electrocution. Mounting the Device to the power grid
has to be performed with caution.
⚠CAUTION! Do not allow children to play with the button/switch connected
the Device. Keep the Devices for remote control of Shelly (mobile phones,
tablets, PCs) away from children.
Introduction to Shelly
Shelly® is a family of innovative Devices, which allow remote
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>