V-TAC VT Series LED Street Light Installation Guide
- June 8, 2024
- V TAC
Table of Contents
V-TAC VT Series LED Street Light
INSTALLATION INSTRUCTION
Horizontal Installation
Technical Specifications
WARNING
- Please make sure to turn off the power before starting the installa-tion.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Caution, risk of electric shock.
- This marking indicates that this product should not be disposed of with other household wastes.
INSTALLATION & WIRING DIAGRAM
-
Switch OFF power before starting installation
-
Connect supply wires to luminare as displayed in the wiring diagram.
-
(a) Pass the cable through mounting adaptor, fix
-
screws on street light by 13mm allen wrench.
(b) Fasten 4 screws against the pole by 13mm allen wrench. -
Turn ON the power to Test
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the
installation and keep this manual handy for future reference. If you have any
other queries, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at their best.
The warranty is valid for 5 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours of Daily operation. Usage of the product for 24 Hours a day
would void the warranty. This product is warranted for manufacturing defects
only.
Warning:
- Ensure the electricity is Switched OFF before starting the installation.
- Please read through all the following instructions before installing the unit.
- The user should prepare all the necessary accessories and spare parts (Spare parts not provided) including the junction box.
- The raised lighting must be connected to the earth’s ground.
- Install only by certified Electrician.
Strictly follow these instructions for installation, and avoid the intensity of the power cable during installation.
- In case of any query/issue with the product, please reach out to us at:
- support@v-tac.eu
- For More product ranges, inquiry please contact our distributor or nearest dealers. V-TAC EUROPE LTD
- Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
Documents / Resources
|
V-TAC VT Series LED Street
Light
[pdf] Installation Guide
VT-30ST, VT-50ST, VT-100ST, VT-150ST, VT Series LED Street Light, VT Series,
VT Series Street Light, LED Street Light, Street Light, Light
---|---
|
V-TAC VT Series LED Street
Light
[pdf] Installation Guide
VT-30ST, VT-50ST, VT-100ST, VT-150ST, VT Series LED Street Light, VT Series,
VT Series Street Light, LED Street Light, Street Light, Light
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>