korenix JetNet 2205 Industrial Ethernet Unmanaged Switch Installation Guide
- June 8, 2024
- korenix
Table of Contents
korenix JetNet 2205 Industrial Ethernet Unmanaged Switch
Overview
- JetNet 2205(f) is a compact size 5(4)-port 10/100T(X) and 0(1) port 100Base F(X) Industrial Ethernet Unmanaged Switch, which ensures high switching performance and easy installation. Along with its high switching performance, it supports multiple internal performance features, such as QoS, Flow Control, it ensures quality traffic transmission.
- The JetNet 2205(f) adopts rugged metal case design to operate in harsh environment (-40~75°C ).
- It is recommended to be powered by DC 24V with 12-40V ranged.
Package Check List
- JetNet 2205(f) Ethernet switch
- Quick Installation Guide
Installation
-
Mount the unit
Din-Rail mount: Mount the Din-rail clip on the rear of JetNet 2205(f) on the DIN rail. -
Grounding JetNet 2205(f)
There is one grounding screw on the bottom side of JetNet 2205(f). Connect the earth ground screw of JetNet 2205(f) to the grounding surface to ensure safety and prevent noise.
- Wiring the Power Inputs
1. Insert the positive and negative wires into the V+ and Vcontact on the terminal block connector.
2. Tighten the wire-clamp screws to prevent the power wires loosened.
Note:
The recommended working voltage is DC 24V. (Input range: DC12~ 40 V)
- Connecting to Network
- Connecting the Ethernet Port: Connect one end of an Ethernet cable into the UTP port of JetNet 2205(f), while the other end is connected to the attached networking device. UTP port support auto MDI/MDIX function.
- The LNK / ACT LED will turn Yellow for 10M Ethernet or Green for 100M Ethernet.
LED| Color| Function
---|---|---
PWR| Green| Power on
1-5(4)| Green| Link for 100M
Flashes Green| Activity for 100M
Amber| Link for 10M
Flashes Amber| Activity for 10M
FX
(JetNet2205f)
| Green| Link
Flashes Green| Activity
- Connection the Fiber Port (JetNet2205f): Connect the fiber port on your JetNet2205f to another Fiber Ethernet device, by following the figure below. Wrong connection will cause the fiber port not working properly.
Support
- 5 Years Warranty
- Each of Korenix’s product line is designed, produced, and tested with high industrial standard. Korenix warrants that the Product(s) shall be free from defects in materials and workmanship for a period of five (5) years from the date of delivery provided that the Product was properly installed and used.
- This is warranty is voided if defects, malfunctions or failures of the warranted Product are caused by damage resulting from force measure (such as floods, fire, etc.), other external forces such as power disturbances, over spec power input, or incorrect cabling; or the warranted product is misused, abused, or operated, altered and repaired in an unauthorized or improper way. Attention! To avoid system damage caused by sparks, please DO NOT plug in power connector when power is on.
- The product is in compliance with Directive 2002/95/EC and 2011/65/EU of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronics equipment (RoHS Directives & RoHS 2.0)
- Korenix Customer Service
- KoreCARE is Korenix Technology’s global service center, where our professional staff are ready to solve your problems at any time Korenix global service center’s e-mail is KoreCARE@korenix.com.
- For more information and documents download please visit our website: http://www.korenix.com/downloads.htm
References
- Korenix Technology, a Beijer Electronics company
- 科洛理思工业通讯
- Korenix Technology, a Beijer Electronics company
Read User Manual Online (PDF format)
Loading......