HILTI KB-TZ2 1 by 2 x 3 Inch Carbon Steel Zinc Plated Concrete Anchor Instruction Manual
- June 8, 2024
- HILTI
Table of Contents
HILTI KB-TZ2 1 by 2 x 3 Inch Carbon Steel Zinc Plated Concrete Anchor
Operating Instructions
| Anchor Diameter [inch] | |
|---|---|
| Symbol | Setting Information |
| Hollow Drill Bit | – |
| Dust Removal Systems | – |
AT-System
| Adaptive Torque System**| –| ✔
| Diamond Core Bit| –| ✔
| Drill Bit Diameter| [inch]| ½
| Effective Embedment Depth| [inch]| 1½
| Nominal Embedment Depth| [inch]| 2
| Minimum Hole Depth in Base Material| [inch]| 2¼
| Installation Torque Concrete| carbon steel| [ft-lb]| 50
| Installation Torque Grout-Filled CMU| carbon steel| [ft-lb]| 25
| Fixture Hole Diameter| [inch]| 9⁄16
WS
| Wrench Size| [inch]| ¾
Use only carbide-tipped masonry drill bits complying with ANSI B212.15.1994
- For steps 1a or 1b, make sure to drill deep enough to achieve h0, taking into account the depth of debris remaining in the hole.
** AT-System not applicable for grout-filled CMU and wood fastening applications.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>