STERLING 71141116 60 Inch x 30 Inch Bath with AIP Backerboard Instructions

June 4, 2024
STERLING

STERLING 71141116 60 Inch x 30 Inch Bath with AIP Backerboard

Features

  •  15″ (381 mm) apron.
  •  Aging in Place backerboards.
  •  Must be installed with Accord wall set (71244106)

Material

Made from solid Vikrell® material for strength, durability, and lasting beauty.

Installation

  •  Alcove.
  •  Left drain.

Recommended Products/Accessories

  • 5425-57 Frameless sliding bath door
  • 5425-59 Frameless sliding bath door
  • 5905-59 Framed sliding bath door
  • 5906-59 Framed sliding bath door, 56-1/4″ H x 59-3/8″ W
  • 5907-59 Framed sliding bath door
  • 542808-59 Frameless sliding bath door
  • 581005-59 Frameless sliding bath door
  • 80001012 12″ straight grab bar
  • 80001018 18″ straight grab bar
  • 80001024 24″ straight grab bar
  • 80011032 32″ straight grab bar
  • 80001036 36″ straight grab bar
  • VA-80172 30″ x 35″ window trim kit
  • 71147103 30″ tile bath/shower w/ADA-adaptable grab bar kit
  • 71147104 30” bath seat kit
  • K-23726 Drain treatment
  • K-23733 Vikrell® cleaner

Codes/Standards

  • CSA B45.5/IAPMO Z124
  • ASTM E162
  • ASTM E662

Warranty – Bathing Fixtures (and) Kitchen and Utility Sinks Made of Solid Vikrell® Material
See website for detailed warranty information.

Available Colors/Finishes

  • Color tiles intended for reference only.
  • Color Code Description
  • 0 White
  • 96 KOHLER Biscuit

Technical Information

All product dimensions are nominal.

  • Installation: Three-wall alcove
  • Drain location: Left
  • Maximum door
  • width: 56-3/4″ (1441 mm)

Notes

  • Install this product according to the installation instructions.
  • Product is designed to be used with a singlehole mixer valve with an escutcheon cover not to exceed 7-3/4″ (197 mm) in width.
  • Bath cannot be installed without the wall surround.
  • Width of back wall at top transitions from 60″ (1524 mm) at the front to 59-3/8″ (1508 mm) in the back corners.
  • Furring strips approximately 1/4″ (6 mm) thick should be used at the back corner studs if drywall is to be installed over the nailing flange.

CONTACT

  • 1-800-STERLING (1-800-783-7546)
  • Kohler Co. reserves the right to make revisions without notice to product specifications.
  • For the most current Specification Sheet, go to www.sterlingplumbing.com
  • 12-29-2021 10:26 – US/CA

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

STERLING User Manuals

Related Manuals