DATRON TW-7000 Voice Enhancement Option User Manual
- June 8, 2024
- DATRON
Table of Contents
DATRON TW-7000 Voice Enhancement Option
INTERNAL OPTIONS
This chapter covers internal options that can be added to the TW7000. They are generally factory installed. If added in the field, installation requires a #2 Phillips-head screwdriver and a board puller included in the following maintenance kits.
- 7000EXT extender kit
- TW7000TK tool kit
INTERNAL OPTIONS Part Number See Page
Additional Channel | 7000ACH | 6-2 |
---|---|---|
ALE | 7000ALE | 6-3 |
Clock | 7000CLK | 6-19 |
Data Interface RS422/423/485 | 7000RS | 6-20 |
Encryption | 7000ENCR | 6-21 |
FSK Remote Control | 7000RF | 6-21 |
High Stability | 7000HS | 6-34 |
ISDN Remote Control | 7000RI | 6-42 |
Narrowband CW Filter | 7000CW | 6-55 |
Noise Blanker | 7000NB | 6-56 |
Recorder | 7000RCDR | 6-62 |
Selcall, Transcall and TransAdapt | 7000TC | 6-63 |
Voice Enhancement Module | 7000VEM | 6-64 |
Wideband Data Filter | 7000WB1 | 6-64 |
For information on changing the on or off status of these options, refer to the TW7000-MSOP operator manual.
Voice Enhancement Option (7000VEM)
This option provides superior voice recognition and signal-quality
improvement in noisy environments.
To install this option:
- Turn the TW7000 off and remove the top cover.
- Remove the board hold-down bars.
- Install the VEM board into the OPTI slot.
- Replace the cover.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>