Shenzhen Mengzheng Technology Co B32 Three-In-One Wireless Charger User Manual
- June 8, 2024
- Shenzhen Mengzheng Technology Co
Table of Contents
**Shenzhen Mengzheng Technology Co B32 Three-In-One Wireless Charger User Manual
**
Thank you for purchasi ng this product. Please carefully read the instruction before use.
Our products are designed to meet the highest standard of qua lit functionality anddesign. We hope you enjoy using your new appliance. Please read the instructions ton』se carefully and keep in a safe place for future reference .
CAUTION
Use this appliance only for its intended use as described in this manual. Do not use this product if it is not working correctly. If it has been dropped ordamaged, or dropped into water.
DESCRIPTIONS
- Indicator switch
- Airpods pro charging area
- Mobile phone charging area
- Apple Watch charging area
Instructions
Instructions
- Stand up the phone charger pad, the user can freely adjust the required angle.
- Plugin the equipped Type-c cable and turn on the power.
- Place the device supporting Qi standard in the center of the charging area to start
charging
- The 3-in-1 wireless charger is suitable for charging mobile phones and Airpodspro, Apple Watch.
| LED Indicator | State |
|---|---|
| Blue light | Connected to power, go into standby |
| Blue light breathing | charge |
| Blue light flashing | Metal object detected or abnormal charging |
| Product name | Three-in-one Wireless Charger |
| --- | --- |
| Model | 832 |
| Input | SV2A 9V2A |
| Phone output | SW/7.SW/10W门SW |
| Earphone output | 3W (max) |
| lwatch output | 2W (max) |
| Prod size ( flatwise) | 140.0114012.96mm |
Package Contents:
- 1 * User Manual
- 1 * Wireless Charger
- 1 * 1 m Type-c cable
- 1 * QC3.0 adapter
Matters Needing Attention
- Do not disassemble this product by yourself.
- Please do not use this product in high temperature or humid environment, please keep away from fire and water.
- Please use the original charging cable of this product to ensure that the wireless fast charging function is normally turned on.
- This product is only suitable for charging devices that support wireless chargi『1g.
- If the mobile phone has no built-in wireless receiving function, please purch ase a wireless charging receiver sepa阳tely fo『use.
- If the mobile phone does not support the wireless fast charging function, it will automatically adjust to the charging efficiency of the mobile phone itself.
- The charging contact surface on the back of the charging device must not contain metal materials, such as iron sheets, finger rings, metal protective shells, etc.
- lt is recommended to use QC3.0/PD power adapter. Can make the efficiency of wireless charging achieve better results.
Storage
- Always store this appliance in moisture-free area. Do not store it in temperatures exceeding 140 F(60°C)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>