BLUETTI 537Wh Portable Power Station User Manual
- June 8, 2024
- Bluetti
Table of Contents
BLUETTI 537Wh Portable Power Station
SAFETY INSTRUCTIONS
Please observe the following instructions to ensure safety use:
- DO NOT attempt to replace the internal battery with anything other than authorized replacement battery by yourself.
- DO NOT operate in wet conditions, let unit dry completely before using.
- Ensure proper ventilation while in use and do not obstruct fan openings on use. Inadequate ventilation may cause damage to the power station.
- DO NOT stack anything on top of the power station in storage or in use, vibration and impact may lead to poor connection to hardware inside.
- DO NOT insert foreign objects into outputs or ventilation holes.
- DO NOT place the power station near heat sources like furnace or ambient heater too close.
- The power station generates the same potentially lethal AC power as household wall outlet, please take carefully and keep children away from it.
General Specs
Output Specs
input Specs
Common Loads Runtime/Charges
537WhxDODxr,+ (the current load power W) = available time(unit: hrs/times)
Note: DOD is the battery discharge depth, 11 is the local inverter
efficiency,DOD=90%,r,=90%.
QUICK GUIDE
-
DC Charging Port m.
-
Adapter Charging Port
-
LCD Screen
-
DC 12V Output Power Button
-
DC 5521 Output Port
-
Cigarette Lighter Port
-
DC Output/Wireless Charging
-
USB-A Output Port
-
USB-C Output Port
-
AC Power Button
-
Ac Outlet
-
Up to 400W power of input
-
AC + PV dual recharge supported
-
Ac Recharge
-
Solar Recharge
LCD SCREEN GUIDE
a. ECO-Mode Icon
b. Battery Capacity
c. Input Power
d. Alert Icon for low Voltage
e. Alert Icon for Temperature Anomaly
f. Output Power
g. Alert Icon for Overload
h. Alert Icon for Short Circuit
Attention: Screen turns off when all output turns off in 2s. Screen turns off while on standby.
How to operate on power station to turn ON/OFF ECO Mode\ and change the working frequency:
- To Enter Settings Mode: Tum “AC” mode to the off position. Press “AC” and “DC” buttons at same time for 2 seconds to enter “Settings” mode.
- To Change Frequency Setting: Once in “Settings” mode, press the “AC” button to switch frequency of the AC output ports to either 50 or 60 Hz depending on your location.
- Eco Mode: Once in “Settings” mode, press the “DC” button to turn ON / OFF the ECO mode.
- Exit Settings Mode: Long press the “AC” and “DC” buttons at the same time for 2 seconds to save and exit the settings mode.
What’s in The Box
1 | Power Station | |
---|---|---|
2 | AC-DC Adapter (Charing cable induded) | |
3 | User Manual | |
4 | Warranty Card |
Extra Options
5 | Car Charging Cable (XT60-F) | |
---|---|---|
6 | Solar Charging Cable (MC4 to XT60-F) | |
7 | Charging Adapter Cable (XT60-F) |
FREQUENTLY ASKED QUESTION
1 How do I clean for power station?****
A Dry, non-abrasive cloths to wipe will be perfect. The power station is a versatile tool for various adventures, simple cleaning would be required from time to lime to keep the unit in a good condition.
2 How do I store my power station?****
A Please store the power station in a dry and cool place at the recommended temperature. Do not expose the power station to humid environment. If you want to store it for a long time, please charge your unit to 80% every 6 months to extend the lifespan of bettery. Remind to turn off the unit before storing.
4 How do I know if my device will work with the power station?****
A Step1: You need to figure out the amount of power your devices require. Some research may be taken on internet search or the user guide of your device shall suffice. Step 2: Check the rated power of certain port on power station. For example, if the AC output port generates 700W of power and your device requires over 700W for a extended period of time, the power station will turn itself off.
4 How to claim the warranty?****
A Please place your after-sale requirement as the warranty card written to the platform where you order
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>