BLACK DECKER IR1000 Light N Easy Compact Steam Iron User Manual

COMPACT STEAM IRON
PLANCHA DE VAPOR COMPACTA
use and care manual
IR1000 IR1010
IR1020S IR1050

IR1000Series_29222_ES_IB_B.indd 1

IMPORTANT SAFETY INSTRUCTIONS

When using your iron, basic safety precautions should always be followed, including the following:

• Read all instructions before using.
• Only use iron for the intended use.
• To avoid the risk of electric shock, do not immerse the iron in water or other liquids.
• Always turn the iron to MIN setting before plugging in or unplugging from the outlet.  Never pull on the cord to disconnect from the electrical outlet; instead grasp the plug and pull to disconnect.
• Do not allow the cord to touch hot surfaces. Let the iron cool completely before putting it away. Loop cord loosely around the iron heel and clip the cord together with the provided plug clip when storing.
• Always disconnect iron from the electric outlet before filling with or emptying water, cleaning, and when not in use.
• Do not operate the iron if it has been dropped, if there are visible signs of damage to the iron or its cord, or if it’s leaking. To avoid the risk of electric shock, do not dissemble the iron; take it to a qualified service person for examination and repair, or call the appropriate toll-free number on the cover of this manual. Incorrect reassembly can cause risk of electric shock when the iron is used.
• Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended when plugged in or on an ironing board.
• Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn the iron upside down – there may be hot water in the reservoir. Avoid rapid movement of iron to minimize hot water spillage.
• The iron must be used and rested on a stable surface.
• When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.

SPECIAL INSTRUCTIONS

• To avoid circuit overload, do not operate another high wattage appliance on the same circuit.
• If an extension cord is absolutely necessary, a minimum 10-ampere cord should be used. Cords rated for less amperage can result in a risk of fire or electrical shock due to overheating. Care should be taken to arrange the cord so that it cannot be pulled or tripped over.

SAVE THESE INSTRUCTIONS.
This product is for household use only.

POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
TAMPER-RESISTANT SCREW
Warning: This appliance is equipped with a tamper-resistant screw to prevent the removal of the outer cover. To reduce the risk of fire or electrical shock, do not attempt to remove the outer cover. There are no user- serviceable parts inside. Repair should be done only by authorized service personnel.
Note: If the power supply cord is damaged, in order to avoid a hazard, it should be replaced by qualified personnel or in Latin America by an authorized service center.
GETTING TO KNOW YOUR COMPACT STEAM IRON

The product may vary slightly from what is illustrated.

HOW TO USE

This product is for household use only.

GETTING STARTED

• Remove the plastic band around the power plug and all labels, tags and stickers attached to the body, cord, or soleplate of the iron.
• Remove and save literature.

FILLING THE WATER TANK

1. With the iron tilted at 45° angle, open the water-fill cover. (A)

2. Using a clean measuring cup, pour water into the opening until the water reaches the “MAX” level mark on the side of the water tank. Do not overfill. Close the water-fill cover securely.
   Tip: This iron is designed to use normal tap water. If your water is very hard, you can use a mixture of 50% tap water and 50% distilled water to avoid build-up. It is not recommended to use water with perfumes or scented additives.

3. Stand the iron on the heel rest.

4. To refill at any time during the ironing process, unplug the iron and follow the above procedure.

USING YOUR IRON

1. Plug the iron into an outlet. The red Power/auto shut-off light will illuminate on the handle, indicating that the iron is heating.

2. Read the manufacturer’s fabric label for clothing care recommendations to help select the correct temperature setting.
   Tip: Since it takes an iron longer to cool down than heat up, organizing your clothing from Low to High temperatures can cut down your ironing time.

3. Select the temperature and steam level on the iron by turning the SmartSteam™ dial until you’ve reached the desired setting. A fabric guide is printed on the water tank for easy reference.

4. Allow the iron for about 2 minutes to heat up to the desired temperature.
   Tip: To dry iron on low heat use SmartSteam™ settings 1–3, or for high heat simply empty the water tank and follow the normal directions. If emptying the tank, once preheated you may need to press the Burst of Steam button a few times to fully empty the water tank.

5. Iron as long as needed. Note that if the iron is left inactive, the 3-Way Auto Shut off Safety feature will activate. Please see the Additional Features section for more details.

6. When finished ironing, turn the dial to the MIN setting and unplug from the outlet.

7. Stand the iron on its heel rest and allow it to completely cool off before storing.

SETTING GUIDE

For best results it’s recommended to use the manufacturer’s garment tags for heat and steam instructions. When in doubt, always start at the low heat setting.

Setting number| Setting name| Setting Description| Icons
---|---|---|---
–| –| Do not Iron|
1| Synthetic| Low Heat and No Steam|
2| Nylon and Silk| Low Heat and No Steam|
3| Polyester| Medium Heat and No Steam|
4| Blend| Medium Heat and Light Steam|
5| Wool| High Heat and Medium Steam|
6| Cotton and Linen| High Heat and High Steam|

ADDITIONAL FEATURES

SmartSteam™ Technology
This technology gives you the control of both soleplate heat and steam level in one dial. On traditional irons the controls are separated, making it difficult to know what settings are right for each fabric. These simple controls take the guesswork out of ironing and ensure optimal results every time. (B) Spray Mist
Press the Spray Mist button to generate a light spray of water. Spray Mist is used to dampen tough wrinkles while dry or steam ironing. This setting works at any SmartSteam™ dial setting. Do not spray silk.
3-way Auto Shut-Off
The iron will automatically switch to Auto Shut-Off mode and stop heating after being left inactive for 30 seconds on the soleplate or side, and 8 minutes on the heel rest. When the iron is in Auto Shut-Off mode, the red light on the handle will blink. Simply move the iron to resume ironing and the soleplate will automatically heat to the selected temperature.

CLEANING AND CARE

This product contains no user-serviceable parts. Refer to qualified service personnel.
CLEANING OUTSIDE SURFACES

1. Make sure the iron is unplugged and has completely cooled.
2. Wipe the soleplate and outer surface with a soft, damp cloth. Water and small amounts of gentle household soaps, such as dishwashing liquid, can be used. Never use heavy-duty cleaners, vinegar or abrasive scouring pads that may scratch or discolor the iron.
3. After the iron has been thoroughly dried, turn the iron back on and lightly steam over an old cloth. This will help remove any reside left in the steam holes.
4. When finished cleaning, turn iron off and allow time to cool before storing.

STORING YOUR IRON

1. Check that the iron is on the MIN setting, unplugged and completely cool.

2. Empty the water tank by opening the water fill door and turning the iron upside down over a sink.
   

3. Wrap the cord loosely around the heel of the iron and secure the cord by clipping it with the integrated cord clip in the heel (C) or the plug clip (D).

4. Always store the iron vertically on its heel to prevent water leaking from the soleplate.

IRONING TIPS AND TRICKS

• This iron is designed to use normal tap water. If your water is very hard, you can use a mixture of 50% tap water and 50% distilled water to avoid build-up. It is not recommended to use water with perfumes or scented additives.
• Since it takes an iron longer to cool down than heat up, organizing your clothing from Low to High temperatures can cut down your ironing time.
• Whenever temperature settings are changed, allow the iron to stand a minute or two to allow heat up or cool down. Test garment by pressing a small hidden area to make sure the temperature of iron is correct.
• Whenever ironing a garment with mixed fabrics, read the garment’s tag for detailed directions or select the fabric setting for the most delicate fabric. For example, when ironing a shirt that is 65% cotton and 35% polyester, use the polyester setting.
• If you’re unsure of the fabric’s content, test a small area (on the inside seam or hem) before you proceed to iron the entire garment or cloth.
• If water dripping occurs, this means that the soleplate isn’t hot enough to create steam. Just allow the iron a minute to reheat and then resume ironing.
• To prevent iron marks on your fabric, iron the fabric inside out.
• Putting on your clothes right after ironing can actually create wrinkles. Always allow your clothing to cool for about 5 minutes after ironing to set the press.

TROUBLESHOOTING

plugging the iron into a different outlet.
Not enough steam or no steam is coming out of the iron.| SmartSteamr” setting selected is too low.
Lower heat levels are not intended to have steam.| Turn the SmartSteamm Dial to settings 4-6 to iron with steam.
Not enough water in the water tank.| Follow the instructions under the “filling the water tank” section and fill to Max level marker.
Iron is not preheated.| If the iron isn’t fully preheated to the desired setting, the anti-drip feature will prevent the iron from creating steam. Allow the iron additional time to heat.
Discolored water is coming through the holes and staining the fabric| Residue build-up in the soleplate cavity or in the soleplate holes.| Empty the water tank after each use.
Use of descaling agents, and perfumed or scented additives.| Refrain from using descaling agents, and perfumed or scented additives.
Use of Starch.| Always clean your soleplate after using starch and clean your iron regularly.
Pure distilled water or softened water is being used.| Use only untreated tap water or a mix of half
tap and half distilled water and clean your iron regularly.

WARRANTY AND CUSTOMER SERVICE INFORMATION

Two-Year Limited Warranty
(Applies only in the United States and Canada)
For service, repair or any questions regarding your appliance, call the appropriate 800 number listed within this section. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail the product back to the manufacturer, nor bring it to a service center. You may also want to consult the website listed on the cover of the manual.
What does it cover?

• Any defect in material or workmanship provided; however, Spectrum Brands, Inc.’s liability will not exceed the purchase price of the product.

For how long?

• Two years from the date of the original purchase with proof of purchase. What will we do to help you?
• Provide you with a reasonably similar replacement product that is either new or factory refurbished.

How do you get service?

• Save your receipt as proof of date of sale.
• Visit the online service website at www.prodprotect.com/blackanddecker, or call toll-free at 1-800-465-6070, for general warranty service.
• If you need parts or accessories, please call 1-800-738-0245.

How does state law relate to this warranty?
This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.

What does your warranty not cover?

• Damage from commercial use
• Damage from misuse, abuse or neglect
• Products that have been modified in any way
• Products used or serviced outside the country of purchase
• Glass parts and other accessory items that are packed with the unit
• Shipping and handling costs associated with the replacement of the unit
• Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)

Are there additional warranty exclusions?

• This warranty shall not be valid where it is contrary to the U.S. and other applicable laws, or where the warranty would be prohibited under any economic sanctions, export control laws, embargos, or other restrictive trade measures enforced by the United States or other applicable jurisdictions. This includes, without limitation, any warranty claims implicating parties from, or otherwise located in, Cuba, Iran, North Korea, Syria and the disputed Crimea region.

IMPORTED BY: Spectrum Brands Corp, S.A.S.
Transversal 23 #97-73
Oficinas 403-404-405, Bogotá, Colombia
Línea Servicio al Cliente: 018000510012
Tel. (506) 2233-1361
ryasasanjose1@gmail.com

1200 W 120 V ~ 60 Hz
At the end of this product’s life, you can mail it to Spectrum Brands at 507 Stokely Drive, Deforest, WI 53532 marked “Product Takeback: Please Recycle!” , 507 Stokely Drive, Deforest, WI 53532 marcato “Product Takeback: Please Recycle!”
BLACK+DECKER ® and the BLACK+DECKER ® logos are trademarks of The Black & Decker Corporation, used under license by Spectrum Brands, Inc. for its manufacturing and sale of this product. All rights reserved. All other marks are trademarks of Spectrum Brands, Inc.

www.BlackAndDeckerAppliances.com

Made in China.
© 2022 Spectrum Brands, Inc. All rights reserved WI 53562
Thank you for your purchase! Gracias por su compra! Register online at
www.prodprotect.com/blackanddecker
Rate and review your products at
www.BlackAndDeckerAppliances.com

Share your pictures & stories with us online Should you have any questions or concerns with your new product, please call our Customer Service Line at 1-800-231-9786 (US).
Please do not return to the store.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>