chicco 40-78cm kiros-evo i-size Infant Car Seat Instruction Manual

: September 3, 2022
: chicco

chicco 40-78cm kiros-evo i-size Infant Car Seat

chicco-40-78cm-kiros-evo-i-size-Infant-Car-Seat-
product

IMPORTANT! KEEP FOR FUTURE REFERENCE

VERY IMPORTANT! TO BE READ

IMMEDIATELY.
IMPORTANT: READ CAREFULLY THE ENTIRE INSTRUCTIONS BOOKLET BEFORE USE IN ORDER TO AVOID RISKS WHEN USING THE PRODUCT AND STORE IT FOR FUTURE REFERENCE. FOLLOW THESE INSTRUCTIONS CAREFULLY IN ORDER NOT TO COMPROMISE YOUR CHILD’S SAFETY.

WARNING:
BEFORE USE, REMOVE AND DISPOSE OF ALL PLASTIC BAGS AND PACKAGING MATERIALS AND KEEP THEM OUT OF REACH OF CHILDREN. IT IS RECOMMENDED TO DISPOSE OF THESE ITEMS AT AN APPROPRIATE WASTE SORTING COLLECTION POINT, AS REQUIRED BY REGULATIONS IN FORCE.

INSTRUCTIONS FOR USE

INTRODUCTION
Product conﬁgurations
Warnings
Product Features
Description of the components
Positions of the handle
Restrictions and requirements regarding the use of the product and vehicle seat

CAR INSTALLATION

Installation and removal of the i-Size base
Installation of the Kiros Evo i-Size child car seat on the i-Size base
Installation of the Kiros Evo i-Size child car seat, without the i-Size base, using the car’s 3-point seat belts

ADDITIONAL OPERATIONS

Placing the child in the child car seat and adjusting the safety harness
Use as a reclined cradle
Canopy
Cleaning and storage

PRODUCT CONFIGURATIONS

The Kiros Evo i-Size child car seat is available in two versions:

Kiros Evo i-Size Clip-On (Fig. A) compatible with the Alysia stroller
Kiros Evo i-Size Fast-In (Fig. B) is compatible with the Best Friend stroller and some strollers in the Chicco range using the appropriate adaptors.

The only diﬀerence between the two versions is the way they attach to the stroller. For use with Chicco strollers refer to the instructions that came with the stroller.

Installation in the car (with or without the i-Size base) works the same for both versions.

WARNING!
The instructions and illustrations provided in this manual refer to the Kiros Evo i-Size Fast-In version. The Kiros Evo i-Size child car seat can be in- stalled in two diﬀerent ways:

With the i-Size base, which may be part of the product conﬁguration or may be sold as an accessory. The Car Seat is compatible with both the Kiros Evo i-Size base and the Kiros Evo i-Size base.
Without the i-Size base, with the car’s 3-point seat belts

WARNINGS

Keep this instruction manual for future reference.
Read these instructions carefully before assembling and installing the product. Do not let anyone use the product unless they have read these instructions.
WARNING! According to accident statistics, a vehicle’s rear seat is generally safer than the front seat: therefore it is recommended to in-stall the i-Size base and the child car seat on the rear seats.
WARNING! SERIOUS DANGER! Never use this device ﬁtted on front vehicle’s seats equipped with a front airbag. It is possible to ﬁt the i-Size base and the child car seat on a front seat only if the front airbag has been deactivated: check with the car manufacturer or see the owner’s manual for instructions on how to deactivate the airbag.
It is always recommended to slide the vehicle seat as far back as possible depending on whether passengers are traveling on the back seat or not.
Make sure that all passengers in the vehicle know how to release the child from the child car seat in case of an emergency.
When ﬁtting the i-size base and the child car seat into the car pay attention to avoid the vehicle seat from potentially interfering with it.
No i-Size base and relative child car seat can guarantee your child’s safety in the case of an accident, but using this product reduces the risk of serious injuries or death.
The risk of serious injuries to the child increases, not only in the case of accidents but also in other circumstances (i.e.: sudden braking, etc.) if these instructions are not followed carefully: always make sure that the i-Size base and the child car seat are correctly fastened to the seat.
If the i-Size base and the child car seat are damaged, deformed or very worn, they must be replaced as their original safety features may have been compromised. After an accident (even minor ones) the i-Size base and child car seat can suﬀer permanent damages, even if not visible to the naked eye. Therefore, they must be replaced.
This product must not be modiﬁed in any way unless the modiﬁcation has been approved by the manufacturer.
Do not ﬁt any accessories, spare parts or components not supplied or approved by the manufacturer.
Never leave the child unattended in the child car seat for any reason.
Never leave the i-Size base and the child car seat unsecured on the vehicle seat, it may hurt or harm the passengers.
Never place anything except an approved accessory between the i-Size base and the seat or between the vehicle seat and the child car seat or between the child car seat and the child: in case of an accident, the i-Size base and the car seat may not work properly.
DO NOT use the product for more than 5 years. After this period, alterations of the materials (e.g., due to exposure to sunlight) may reduce or compromise the product’s eﬀectiveness.
Do not use second-hand devices: they may have been structurally damaged and not visible to the naked eye but still liable to compromise the safety of the product.
Check that the safety harness strap is not twisted to avoid the strap or any parts of the child’s car seat becoming trapped between the car doors, or rubbing against cutting edges. If the safety harness is cut or frayed, it must be replaced.
It is recommended to cover the child car seat if the vehicle is left exposed to direct sunlight. The seat fabric must only be replaced with another approved by the manufacturer as it forms an integral part of the child car seat. To ensure the safety of the child’s car seat, never use it without its fabric cover.
In the ﬁrst few months after birth, children may have diﬃculty breathing in a seated position. Avoid leaving children to sleep in the seat until they can lift their heads themselves.
Premature babies born before the 37th week of pregnancy can be at risk if placed in a child car seat. These babies might incur breathing problems when sat in a child car seat. We, therefore, recommend you to contact your doctor or the hospital staﬀ, before leaving the hospital. They can recommend the most suitable type of child car seat based on your child’s situation.
Do not transport loose, unsecured objects or baggage on the back shelf of the vehicle: they may injure the passengers in the case of an accident or sudden breaking.
Make sure that all car passengers fasten their safety harnesses, for their own safety and because, dur-ing the journey, they may harm the child during an accident or sudden braking of the car.
On long-distance journeys, make frequent stops. Children get tired easily. Never, for any reason, remove your child from the child car seat whilst the car is moving. If your child needs attention, ﬁnd a safe place and stop.
Artsana declines all responsibility for any inappropriate use of the product.

PRODUCT FEATURES

This child car seat is approved for the safe transportation of children with a height between 40-78 cm (from birth up to 13 kg – from 0 to 15 months), in accordance with European Standard UN/ECE R129

IMPORTANT NOTICE CONFIGURATION WITH i-Size BASE
This is an “i-Size” child car seat. It is approved according to Regulation UN/ECE R 129 for use in vehicles with “i-Size compatible” seats as indicated by the vehicle manufacturer in the vehicle’s instruction manual and in the vehicle compatibility list. In case of doubts, contact the manufacturer of the restraint device or your dealer. The vehicle compatibility list can be found in the product sheet online or by scanning the QR code on the last page of this manual.

WARNING!
Serious Danger! Do not install the child car seat on seats where the airbag is activated.

IMPORTANT NOTICE CONFIGURATION WITHOUT THE i-Size BASE
This is a “Universal” child car seat. It is approved according to Regulation UN/ECE R 129 for use in vehicles with “Universal” seats as indicated by the vehicle manufacturer in the vehicle’s instruction manual. In case of doubts, contact the manufacturer of the restraint device or your dealer.

WARNING!
SERIOUS DANGER! Do not install the child car seat on seats where the airbag is activated.

DESCRIPTION OF THE COMPONENTS i-Size base Fig. C

A. Isoﬁx connectors
B. Isoﬁx connector removal lever
C. Isoﬁx system connection indicators
D. Isoﬁx connector release buttons
E. Child car seat fastening slots
F. Child car seat correct fastening indicator
G. Support leg
H. Support leg height adjustment button
I. Leg support correct installation indicator
J. Rebound bar

Kiros Evo i-Size child car seat Fig. D

X. Handle
K. Hood
L. Fabric cover
M. Reducer cushion Fig. E
N. Child car seat harness
O. Shoulder straps
P. Buckle
Q. Harness adjustment button
R. Adjustable headrest Fig. F
S. Waist car safety belt slot on the child car seat
T. Buttons to rotate the carry handle Fig. G
U. Diagonal car safety belt slot
V. Release handle (from the I-Size base and stroller)
Z. Headrest and belt adjustment button

POSITIONS OF THE HANDLE

The child car seat handle can be adjusted to 3 positions (Fig. 1).

A. Position for transportation in the car with the base and without the base and for carrying by hand.
B. Reclined cradle mode position, or for fastening to an appropriate Chicco stroller.
C. Fixed reclined cradle position.

To adjust the position, press both buttons (T) on the handle bar together and rotate it to the desired position until you hear it click into place.

RESTRICTIONS AND REQUIREMENTS REGARDING THE USE OF THE PRODUCT AND VEHICLE SEAT
The child car seat can be installed in two different ways:

The i-Size base (type approval number 030059), which must be used in combination with the Kiros Evo i-Size car seat, is approved according to standard UN/ECE R129. Before installation, check that the car is ﬁtted with Isoﬁx anchorage points, which can be found between the backrest and seat of the car.
The Chicco i-Size base can be used on all i-Size approved vehicle seats (check the vehicle’s instruction manual) and on seats of vehicles included in the “Vehicle compatibility list”. In any event, the vehicle seat must be forward facing. Never use this car seat rear facing on any vehicle’s seat (Fig. 2).
When the vehicle’s 3-point seat belts (without the i-Size base). In any event the vehicle seat must be forward facing. Never use this car seat rear facing on any vehicle’s seat (Fig. 2). The vehicle’s seat must be equipped with either static or retractable 3-point safety harnesses approved according to UN/ECE Regulation R16 or other equivalent standards (Fig. 3).

WARNING!

Never ﬁt the child car seat to a vehicle seat that is only equipped with a 2-point seat belt (Fig. 4).
If it is used in a vehicle equipped with rear safety harnesses with integrated airbags (inﬂatable seat belts), the interplay between the inﬂatable portion of the seat belt and this child restraint system could cause serious injury or death. Do not install this child restraint equipment where an inﬂatable safety harness must be used. Install it using the Isoﬁx system or move the child’s car seat to a suitable type of safety harness. During installation with the Isoﬁx system, the safety harness may not be fastened behind the child’s car seat, as this would engage the inﬂatable portion of the safety harness.
SERIOUS DANGER! Never use this device ﬁtted on front vehicle’s seats equipped with a front airbag. It is possible to ﬁt the i-Size base and the child car seat on a front seat only if the front airbag has been deactivated: check with the car manufacturer or see the owner’s manual for instructions on how to deactivate the airbag. It is always recommended to slide the vehicle seat as far back as possible depending on whether passengers are traveling on the back seat or not.

CAR INSTALLATION

INSTALLATION AND REMOVAL OF THE

I-SIZE BASE
Proceed as indicated to install the i-Size base:

Remove the plastic cover from the Support Leg (Fig. 5)
Extract the support leg (G) (Fig. 5A). An acoustic signal will activate and stop when the i-Size base has been installed correctly.
Completely extract both Isoﬁx connectors (A) of the base by pulling the connector ex-traction lever (B) (Fig. 6). Make sure that the system is extracted to the end stop.
Position the i-Size base on the desired seat and fasten the Isoﬁx connectors to the anchor-age points found between the backrest and the vehicle seat (Fig. 7). You will hear a “click” when the connectors ﬁt into place.
WARNING! Make sure that the connection was made correctly by checking that the two indicators (C) are green.
Push the i-Size base ﬁrmly against the backrest of the vehicle seat (Fig. 8) to make sure it is securely in place.
Check that the two connectors are fastened correctly by trying to pull the base multiple times.
Position the support leg (G) and adjust it using the adjustment button (H) (Fig. 9). When the support leg is installed correctly, the acoustic signal will stop and at the same time, the indicator (I) will turn green (Fig. 10).

REMOVAL
Press the support leg adjustment button (H) and shorten it to the end stop. Lift the ISOFIX connector extraction lever (B) and move the base away from the backrest to the end stop. Release the ISOFIX connectors by pushing the release buttons (D) (Fig. 11). While holding down the ISOFIX connector ex-traction lever (B), push the ISOFIX system into the base, making sure to reach the end stop. Turn the support leg and fasten the feet in the provided slot, deactivating the acoustic signal.

INSTALLATION OF THE Kiros Evo i-Size CHILD CAR SEAT ON THE I-SIZE BASE

Before fastening the child car seat on the i-Size base, make sure that the 4 hooks are open correctly; to check this, simply press the two Y levers located to the sides of the base (Fig. 12A).

Fasten the child car seat on the i-Size base (rear facing) and push down, leg side, until you hear it click into place (Fig. 12).
When the child car seat is properly fastened, the indicator (F) will turn green (Fig. 13).
Check that the child car seat is correctly ﬁt-ted on the base by lifting the front and rear sections.

Be sure that the handle is in vertical position A (Fig. 1). To free the car seat from the base, pull on the appropriate handle (V) and, at the same time, use the grip to lift the car seat (Fig. 14). chicco-40-78cm-kiros-evo-i-size-
Infant-Car-Seat-fig-10

INSTALLATION OF THE Kiros Evo i-Size CHILD CAR SEAT WITH THE CAR’S 3-POINT SEAT BELTS
To install the child car seat without the base, proceed as follows:

Position the child car seat on the selected vehicle seat rear facing.
Pull the vehicle safety belt and fasten it to the relevant buckle, inserting the horizontal (waist) part of the belt through the child car seat’s two green slots (S) (Fig. 15).
Take the diagonal car safety belt and feed it through the relevant green slot (U) on the back of the child car seat’s backrest (Fig. 16).
WARNING! When traveling by car, this diagonal safety belt must ALWAYS be threaded through this slot.
Pull the belt as tightly as possible without leaving any slack and making sure it is not twisted.

Be sure that the handle is in vertical position A (Fig. 1).

To remove the child car seat:

Release the car safety belt by pressing the buckle.
Unthread the belt through the diagonal and horizontal slots.

ADDITIONAL OPERATIONS

PLACING THE CHILD IN THE CHILD CAR SEAT AND ADJUSTING THE SAFETY HARNESS

Once installation is complete place the baby in the seat as follows:

Press the adjustment button and pull the child car seat harness straps to loosen them (Fig. 17).
Press the red button (Fig. 18) to open the buckle.
Place the baby on the seat.
WARNING! The harness straps must always be adjusted to adapt to the child’s growth phase. Before installing the child car seat inside the vehicle, adjust the harness straps to the right height. To adjust them correctly, the harness straps must come out from the backrest at the height of the child’s shoulders. The height of the headrest and straps can be adjusted simultaneously using button Z to adapt to your child’s growth.
Overlap the two ends of the harness straps, insert them together inside the buckle until you hear them clicking (Fig. 19).
WARNING! Never insert just one end of the harness into the buckle or insert them one at a time. Press button Q to adjust the straps.
Tighten the child car seat’s safety harness by pulling the adjustment strap (Fig. 20).

WARNING!
The reducer cushion guarantees the correct support and the ideal position for the neck and back of babies from when they are born until they weigh about 6 kg. Never use the reducer cushion if the child weighs more than 6 kg (maximum height of the child 60 cm).

USE AS RECLINED CRADLE

When the child car seat is not used in a car, it can be used as a reclined cradle. Place the child car seat only on stable horizontal surfaces. WARNING! Before carrying the child car seat, always move the carry handle to position A (vertical).

WARNING!

Do not leave the child unattended. WARNING! Always use the restraint system. WARNING! Using the child car seat on raised surfaces such as tables, chairs etc. can be dangerous.
This child car seat is not designed for long periods of sleep.
Do not use the seat when the child is able to sit up independently. This child car seat is not a replacement for a bed or crib.

If children needs to sleep, they should be moved to a bed or a cot. Do not use the child seat if any of its parts are broken or missing.

CLEANING AND STORAGE HOW TO CLEAN THE PLASTIC AND METAL PARTS

Clean the plastic and coated metal parts with a damp cloth only. Never use abrasive deter-gents or solvents. The moving parts of the child car seat must not be lubricated.

CLEANING THE FABRIC LINING
The child seat’s fabric lining can be removed and washed by hand or in a washing machine at 30°C. To wash it, unfasten the straps, remove the shoulder straps by opening the snap-buttons located in the rear part of the car seat (Fig. 21) and pull them oﬀ the straps (Fig. 22). Then remove the straps from the slots and the lining from the headrest. Open the button under the handle and pull oﬀ the fabric. chicco-40-78cm-kiros-evo-i-size-Infant-Car-Seat-
fig-14

Follow the steps above in reverse order to ﬁt the lining again.

WARNING!
Fit the straps again correctly and avoid twisting.

Please refer to the cleaning instructions on the fabric label, which illustrate the following washing symbols:

Machine washable at 30°C
Do not bleach
Do not tumble dry
Do not iron
Do not dry clean

Never use abrasive detergents or solvents. Do not dry the fabric cover within a dryer, let it dry without squeezing it.

CHECKING THE CONDITION OF THE COMPONENTS
It is recommended to regularly check the condition of the following components to make sure they are not damaged or worn:

Fabric cover: check that the padding does not come out from the seams. Check the condition of the seams: they must always be intact and undamaged.
Harness straps: check that the fabric lining is not frayed or the harness strap worn out in the parts corresponding to the adjustment crotch strap, shoulders and harness adjustment plate.
Plastic parts: check that the plastic parts are not worn out, damaged or faded. WARNING! If the child car seat is damaged, deformed or excessively worn, it must be replaced: as its original safety features may have been compromised.

STORING THE PRODUCT

When it is not ﬁtted in the car, it is recommended to store the child car seat in a dry place, away from sources of heat and to protect it from dust, humidity and direct sunlight.

WARNINGS ELECTRICAL PARTS

To replace the battery: loosen the screw located on the foot of the support leg (Fig. 23), open the cover (Fig. 24), remove the drained battery from the compartment, and insert the new battery, making sure that the correct battery polarity is observed (positive pole facing upwards) (Fig. 25), reﬁt the cover and tighten the screw fully.
Batteries must only be replaced by an adult.
Use a 3V, CR 2032 battery similar to the type recommended for the operation of this product.
Always keep batteries and tools out of reach of children.
Always remove ﬂat batteries from the product to prevent any possible liquid leaks from damaging it.
Do not throw dead batteries into a ﬁre or leave them in the environment; they must be disposed of through waste sorting.
If the batteries are leaking liquid, replace them immediately, making sure to clean the battery compartment; thoroughly wash your hands if they have come into contact with the liquid.
Always dispose of leaking batteries immediately: they can cause burns or other types of injuries.
Prevent the electric part from coming into contact with water or ﬂuids; water will damage the electronic circuit.

DISPOSING OF THE PRODUCT

When the child’s car seat no longer complies with the original safety standards, stop using it and dispose of it at an appropriate collection point. Dispose of the child car seat always following environmental rules and regulations adopted within the country of use.

CONFORMITY WITH EU DIRECTIVE 2006/66/EC as amended

The crossed bin symbol on the batteries or the product packaging indicates that, at the end of their life, they must be disposed of separately from domestic waste, either by taking them to a separate waste disposal site for batteries or by returning them to your retailer when you buy similar rechargeable or non-rechargeable batteries. The chemical symbols Hg, Cd, Pb, may be present below the crossed-out rubbish bin, specifying the type of substance found in the battery, Hg=Mercury, Cd=Cadmium, Pb=Lead. The user is responsible for delivering the spent battery to the appropriate collection facility, thereby facilitating proper treatment and recycling. The correct separate waste disposal of your old toy will help prevent potential negative consequences for the environment and human health and favor the recycling of the materials of which the product is made. Illegal disposal of the product by the user will damage the environment and human health. For further information regarding the waste disposal services available, contact your local waste disposal agency or the shop where you bought the appliance.

WARRANTY

The product is guaranteed against any conformity defect in normal conditions of use as stated in the instructions. Therefore, the warranty does not apply in the case of damage caused by improper use, wear or accidental events. For the duration of the warranty on conformity defects, please refer to the speciﬁc provisions of national laws applicable in the country of purchase, where provided.