Shenzhen Longxiang Intelligent Technology WXM35-2 Wireless Microphone User Manual

Shenzhen Longxiang Intelligent Technology WXM35-2 Wireless Microphone

Introduction

Thanks for choosing our product.
This product is a smart wireless microphone that provides professional-grade recording output. Plug and play, n app required. Multiple uses: It can be used in online live broadcast, video Vlog shooting. program interview, recording, video teaching and other occasions. This product consists of three parts: charging box, microphone transmitting end and receiving end. (as shown in the figure below, some models have no charging box, subject to the real object )

ID Diagram

1. Windproof Net
2. Microphone indicator
3. Microphone Type-c charging port
4. Microphone clip
5. Switch key
6. Type-C or Lightning port to connect phone
7. Receiver indicator
8. Receiver charging port
9. Charging box Type-C charging port
10. LED Display

How to use

Step 1: Connect the receiver to phone with port.

Note: oppo/vivo/iqoo / realm brand mobile phones can be used normally only when they go to the settings (search “OTG” – turn on OTG power supply)

Step 2: Press switch key of microphone, the indicator light turns green, and then power is turned on.

Step 3: The indicator Red light of receiver keeps always on,then open the phone camera,live App or otherApps, and then to use the microphone to receive sound

Special Note:
For the use of port: there is no battery in receiver, and no need to recharge during live. If the phone is low power during Live, it can be recharged directly through port

About UI

Microphone Transmitter

Al noise rnduction

|

Green light

 |

Press1hebu tton threetimes toturnono r off thereve rb funct ion

|

Thegreen and redlightsblinks once then thegreenl ight is alwayso n

 | Pressthetwicetoturnon or off them utefunction| The green light blinks
Charg ing|  | Redlightisalwayson
Fully charged|  | All1helig ht swento ut
Low batte ry|  | Theredlightblinksevery10s e

RECIVER

blinks
 | Au1omaticshu tdownaf terunplugg ing|
 |  | The light blinks
 |  | light is always on

Packing List

Content of packing

1. Microphone transmitter
2. Lightning receiver
3. Charging box
4. Charging cable
5. User manual

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance wit the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturercould void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device mus accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>