Dongguan Yisai Electronic Technology CQ-01 Mag-Hifisound Magnetic Adsorption Instruction Manual
- June 8, 2024
- Dongguan Yisai Electronic Technology
Table of Contents
Dongguan Yisai Electronic Technology CQ-01 Mag-Hifisound Magnetic
Adsorption
Thank you for purchasing our products.
- Tam very happy that you share the convenience and enjoyment of this smart product technology with us. With the popularity of mobile lifestyles, we will use the latest technology to inject energy into your mobile life.
- Please read the instructions and warnings carefully before using this product, Improper use will cause damage to the product or endanger the safety of others.
- This instruction has clarified the correct use of this product and the necessary safe use information, please read it carefully.
- This product and pictures are for reference only, and everything is subject to the actual product.
Important safety information
- Please observe the following basic safety instructions to ensurethe safe and reliable use of the product.
- Observe all warnings and instructions marked on the product.
Please use a charging device with an output voltage of 5V to avoiddamage to
the product.
The product uses a built-in polymer battery, please turn it off when not in
use.
Warning
Removing the built-in battery will invalidate the warranty and destroy the
product.
Notice
Rechargeable batteries have a limited number of recharges, and battery life and recharge times depend on usage conditions and settings.
WARNINGS
- Do not operate the product when it is dipped in water or splashed with liquid.
- Do not place the product near a high-temperature heat source or place the product in a high-temperature place to dry or blow dry.
- Do not put too much pressure on the product
Product parameter
- Name: Mag-HiFisound
- Input : 5V-1A
- Speaker power: 5W
- Product model : CQ-01
- Bluetooth version : 5.0+EDR
- Wireless Bluetooth range : 10m
- Playing time : 6-8 hours
- Charging time : 1.5 hours
- Shape material : ABS+PC
- Battery capacity : 600mAh
- Weight: 87 grams
Packing List
Product structure name
How to use this product to charge the built-in battery
The speaker is powered by a built-in rechargeable battery.
Note : Fully charge the built-in battery before use
- Press and hold the power button for 3 seconds to turn on/of, the voice playback prompt is on/ofi, and the voice playback prompt is displayed after the Bluetooth connection is successful, and the indicator status is blue.
- When the music is playing, press the power button once to pause/play.
- TWS mode : two devices are required; long press the power button to turn on one of the devices, and pair Bluetooth, the connection is successtul; long press the power button to tum on the other device, and double-click the power button to enter TWS mode; double-click again to turn off TVWS mode.
Note : If two devices are tumed on and enter TWVS mode, only one device needs to be connected to the Bluetooth paired phone; if you makeamistake, please press and hold the device shutdown button to turn off and re-enter the TWS mode operation.
Note : The mobile phone will display the power of the speaker after the Bluetooth connection is successful. When the power of the device is less than 10%, the indicator light status is blue fast flashing. The voice playback prompt changes the device to automatically shut down when the battery is exhausted.
Use Bluetooth device
You can use speakers to listen to the audio of the player
Notice:
- The working range between this product and the Bluetooth device is approximately 10 meters.
- The working range will be reduced if there is any obstacle between this product and the Bluetooth device.
- Keep away from other electronic devicesthat may cause interference.
Link device
Search for Bluetooth devices on your device and select Mag-HiFiSound in the device bar. The speaker will sound prompt once if the link is successful after the link is established.
Disconnect from the device
-
Tum off the Bluetooth connection with this speaker on your device.
-
The speaker beeps once, and Bluetooth exits after disconnécting the link.
Note : Before connecting another Bluetooth device, disconnect the curent device first Reconnect device -
For devices that have þeen pairęd and auto-reconnected With Bluetooth, the product will automatically reconnect to the device after detecting the device.
-
For deviçes that have been paired with Buetooth but do not support automatic reconnection, please manually reconnect With this product.
Play audio via Bluetooth
Note : If there is an incoming call on the connected mobile phone, the music playback will be paused.
Notice
- The device will automatically shut down in the power-on state if the Bluetooth is not connected or disconnected for more than 5 minutes.
- Common troubleshooting methods
- No electricity: charge the speaker
No sound:
- Adjust the volume of the connected device.
- Make sure your Bluetooth device is within the effective working range.
- The speaker does not respond: restart the speaker.
Bluetooth device situation:
- The audio quality is poor after connection.
- Move the device dose to the product or remove the obstacles.
- Cannot connect with the device:
- This product is connected to another Bluetooth device.
- Disconnect from the other device and try again
Notice
The non-magnetic mobile phone or non-metallic object can be attached to the package with a steel ring to achieve the magnetic function.
One year warranty
The waranty tems of this product are as follows: within one year from the date
of purchase, the company shll be responsible for all problems arising from
product materials and workmanship.
If there is any problem with the product during the specified warranty period
and the reason is justified, the company will deal with it according to the
specific requirements of the purchaser.
- Free repair of defective products and replacement of new parts.
- Replace with a new product.
- The transportation cost of the product shall be bome by the manufacturer and the consumer. (The aonsumer pays the shipping fee for the product that needs to be overhauled to the manufacturer. The manufacturer pays the shipping fee for retuming the new or repaired product to the consumer.) The renewal or maintenance fee for the product that does not meet the waranty conditions and the round-trip transportation fee shall be paid by the consumer.
Exclusions and restrictions
Within the scope of the improper warranty, the company will not be responsible for any damage to the mobile device or any loss of data media stored in the mobile device or in the products and parts of the company. And in accordance with the stipulated warranty clauses, we are not responsible for the above- mentioned lost procedures, data restoration and reinstallation.
The above warranty clauses are not used in the following situations:
- Damage caused by accidents, misuse or misuse of products, and non-company products.
- Damage not caused by the company’s services.
- Products with unclear or scraped serial numbers.
Warranty Card
Describe the repair problem in detail:
- Name:
- Telephone:.
- Address:.
- Problem:.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>