DIMTON 15 Hi Bluetooth Stereo Headset User Manual

DIMTON 15 Hi Bluetooth Stereo Headset User Manual

Attention

Attention
Thank you for purchasing Dimton , Hi Bluetooth stereo

headset. For the best user experiences, please read this manual before using. Sound volume warning

Listening for long period of time or to loud sounds may cause impaired hearing.

Disassembly or modification

The Hi is precisely made in the factory. Any disassembly or modification may damage the device. Please do not tear any of the safety regulation and serial number stickers from the device, which will void warranty. Please contact us at service@dimton.com if needed. Warranty:

In normal use, we offer one year warranty of the headset and half year warranty of the wires from the date of purchase. Any disassembly or modification will void warranty.

Hi Appearance Design

When USB charger cable is connected, Bluerider status light will emit red light. After it is fully charged, the red light will be off. Due to water- proof function, please use DIMTON USB charger cable. Do not use unauthentic USB charger cable, which will cause malfunction.

Please do not insert the wrong cable to speaker & microphone set port. This will burn off the circuits.

Switch on / Switch off / Battery indicator

Switch on
When the device is off, long press the rotation button for 3 seconds to switch on. The Bluerider status light will flash blue light slowly

Switch off
When the device is on, long press the rotation button for 3 seconds to switch off

Battery indicator
Turn the rotatation button to the left and press once

Rotate the button to the left and press once at the same time. The three battery indicators LED will  show the remaining battery power, and a voice message will also tell the battery power.

1. LED light: Power lower 50%
2. LED lights: Power over 50%
3. LED lights: Power over 90%

No LED light: Power lower than 10%, Bluerider status light will emit red light.

Pairing with cellphone / Memory clearance

Pairing with cellphone

1. When the device is on, turn the rotation button to the right and press for 3 seconds. Bluerider status light will flash red and blue light, meaning pairing has been activated
   

2. Switch on the cellphone Bluetooth, search for Bluerider Hi. Pair up with Bluerider Hi.

3. 3.After completing pairing, Bluerider status light will turn into blue and red light flashing slowly

Memory clearance

When the device is on, turn the rotation button to the left and press for 6 seconds. Bluerider status light will flash quickly, meaning memory clearanc

When the device is on, turn the rotation button to the left and press for 6 seconds. Bluerider status light will flash quickly, meaning memory clearance.

Play/Stop music/Adjust volume/Next song/Previous song

Play/Stop music

Turn right and press When the device is connected to the cellphone,and both devices are on, turn the rotation button to the right and press, the music will turn on. When the music is playing, turn off the music by doing the same operation

Adjust volume

Turn left to volume down When the music is playing, turn the rotation button to the right, the volume will be up. Turn the rotation button to the left, the volume will be down.

Turn right to volume up

Previous song

Turn right for 2 seconds When the music is playing, turn the rotation button to the right for 2 seconds, then previous song will play
Next song

Turn left for 2 seconds When the music is playing, turn the rotation

button to the left for 2 seconds, then next song will play

Answer phone call/Reject phone call/Redial

Answer phone call/Hang u

When there is a phone call, press the rotation button once to answer the phone call.
During the call , press again to hang up the call.

Short press the rotation button to answer calls

Reject phone call

When there is a phone call , long press the rotation button for 2 seconds to reject.

Long press the rotation button to reject calls

Redial the last call

When the device is on , short press the rotation button twice to redial the last call.

Short press the rotation button twice to redial calls

Voice command

Short press to activate Siri/OK Google

Automatically turn on voice command

When the device is paired with cellphone, and both devices are on, short press rotation button to activate voice command in phone

Android phone: activate OK Google iPhone: activate Sir

*The cellphone must be equipped with voice command

Bluetooth Stereo Headset

Simplified Installation Manual

Content In Package

• Operation manual x1
  

• HI device x1

• USB charger cable x1
  

• Brand new anti-noise speaker and microphone set x1
  

• Round velcro, big (loops) x2

• Rectangle velcro (loops) x1

• Round eva rubber x2

• 3M TM Dual LockTM x2

Speaker Installation

Upper view from top of helmet

**According to European safety regulations, one side of speakers is removable. Please make sure that both sides of speaker are installed at correct positions.

**

Normal installation Install round velcro directly

Round velcro, big (loops) x2

If the lining of the helmet is too thick, causing the speaker too far from the ear, please install the round eva rubber first to make the speaker nearer.

Round eva rubber x2 Round velcro, big (loops) x2

Install the speaker according to the ear pocket shape, so the square plug of the speaker won’t pop out.

Please make sure that the speakers are in the center of the ear to receive the best sound.

Microphone Installation

View of the helmet lining

Remove the helmet  lining, stick the rectangle velcro (loops) to the lining, then place the round velcro (hooks) of the microphone to the rectangle velcro (loops). Then button up the lining.
Rectangle velcro (loops) x1

Outside

Microphone Structure

• Microphone in correct position
  

• Microphone away from position, affecting voice receiving
  

The microphone is flexible anti-noise structure, minimizing ambient noise and physical vibration. Please keep the word “Bluerider” outward.

The distance between microphone and mouth should bebless than 1 cm. The closer to the mouth, the better quality

Device Installation

• 3MTM Dual LockTM has been glued already
  

• Please place on a relatively flat surface
  
  

Dimton social networking service

FCC regulatory conformance：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio o television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of  the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference caused by  unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

RF Exposure
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environm nt.

IC regulatory conformance
This device complies with CAN ICES-003 (B)/NMB-003(B). This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>