7622222012 Shrimp Lutec Outdoor Motion Sensor Lamp User Manual

7622222012 Shrimp Lutec Outdoor Motion Sensor Lamp

Thank you! For your purchase

WHAT IN THE BOX

TOOLS

Technical Data

• Supply Voltage: 220-240 V~, 50/60 Hz

• Bulb Type: LED (23.5W)
  The light source is only exchangeable by a professional.

• Conformity with all relevant EC Directive requirements.

• Splash-proof

• Class I product, must be connected to earth.

• Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice.

Safety Instructions

• You can consult the Safety Instructions on our website: www.lutec.com/service/safetyinstructions
• Please scan the QR code underneath. For your convenience, you can find these Safety Instructions also in the box.
• This product is fully compliant to the ERP Regulation (EU) 2019/2020 and Amending Regulation (EU) 2021/341.
• This product contains a light source of energy efficiency class .

Warranty Conditions

All LUTEC products meet the highest quality requirements and have been subjected to strict quality control. The products are designed, produced, and tested in accordance with International & European safety standards. LUTEC Europe NV, Herentalsebaan 425, B-2160 Wommelgem – Belgium (“LUTEC Europe”) will grant an operational warranty under the following terms and conditions:

The warranty period for LUTEC products is 5 years ( 2 years for products within the Solar Energy ranges) and starts on the date of purchase. LUTEC  has an extra 15-year anti-corrosion guarantee on all galvanized and resin outdoor luminaires.

1. The guarantee applies to all LUTEC indoor & outdoor lighting purchased within the European Union and/or Switzerland whose packaging is labeled accordingly. Excluded are replaceable bulbs, batteries, starters, and other wear-and-tear parts and consumables. The products are guaranteed against material, manufacturing, or design faults whereby the scientific and technical state of the art applicable at the time the products were manufactured is relevant.

2. LUTEC Europe can either repair or replace the product or refund the consumer the purchase price. We will replace the old product with a new product of the same model, type, and quality free of charge. If the product purchased is no longer manufactured at the time we are notified of the fault, LUTEC Europe will supply a similar product. We do not refund assembly and disassembly costs, transport costs and other expenses, postage fees, and similar costs. Furthermore, the guarantee does not include compensation for damage due to interruption of operation, loss of damage, wasted expenditure, installation and removal costs, etc. We cannot be held liable for transport damage or transport loss.

3. The guarantee only applies if:

   • the products are used as intended;
   • no unauthorized adjustments/modifications are made to the product by a third party;
   • the products are maintained and cared for as specified in the operating instructions
   • the lights are mounted and installed in accordance with LUTEC’s installation instructions;
   • the replaceable bulbs comply with the standards applicable to such replaceable bulbs and are specifically approved for the intended use (rating plate, installation/assembly instructions);
   • the product surfaces do not display any signs of chemical or physical damage caused by improper handling (e.g. use of unsuitable cleaning agents or sharp objects).

4. In case of warranty, please contact your local dealer/seller from whom you have purchased the product or LUTEC Europe directly. The contact details of the local LUTEC partners can be found on www.lutec.com.
   The dealer/seller and/or LUTEC Europe must be promptly notified of any defect/fault within 30 days of finding the fault, otherwise, we will not recognize the claim. To make a claim under the warranty, submit the
   proof of purchase, including the date of purchase and the product model number.

5. Statutory warranty rights remain unaffected by and apply in addition to this guarantee. The same applies to claims against the seller.

6. Full address of the guarantor: LUTEC Europe NV
   Herentalsebaan 425 B-2160 Wommelgem – Belgium
   Telephone:: +32 (0)3 284 51 62
   Email: info@lutec-europe.com
   info@lutec.com
   www.lutec.com
   www.lutec.com/warranty

Installation

Function

At dusk, the motion sensor becomes active.
Any movement within the detection reach will switch on the light. The light stays on for 1-3-10 min. At dawn, the motion sensor will deactivate.

SETTING

DISTANCE setting

TEST setting

To adjust the detection zone in daylight. When the sensor detects movement the light turns on for 5 sec.

TIME setting

DUSK TO DAWN setting

Activate sensor override mode

De-activate sensor override mode

Operation

• Weather conditions can influence sensor operation.
• Keep the sensor clean.

1. LUTEC Europe NV Herentalsebaan 425 B-2160 Wommelgem Belgium
2. LUTEC UK Ltd 110 Brooker Road EN9 1JH Waltham Abbey United Kingdom
3. LUTEC China Head Office CN8, Far-East Industry Park Yuyao,Zhejiang China

DESIGNED IN EUROPE, MADE IN CHINA

• +32 3 284 51 62
• info@lutec-europe.com
• www.lutec.com
• www.lutec.com/services/global-network

Points de collecte sur www.quefairedemesdechets.fr

References

• LUTEC | Home
• warranty | Lutec

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>