motorline PROFESSIONAL MFE Modulated Reflective Infrared Pair Instruction Manual

June 8, 2024
motorline PROFESSIONAL

OPERATION/PROGRAMMING MANUALmotorline PROFESSIONAL MFE Modulated
Reflective Infrared Pair -1

TECHNICAL CHARACTERISTICS

• Power supply AC 12/24v – DC 12/24/36v
•Consumption 100mA
•Distance 12 meters
•working Temperature -25°C – +65°C
•Relay Capacity “Volt-free contacts”
•Protection grade IP54
•Polarization filter This feature prevents reflections caused by reflective

objects.

LEDs

Red Orange Green Signal strength
No signal
Low
Medium
High

OPEN THE PHOTOCELL

motorline PROFESSIONAL MFE Modulated Reflective Infrared
Pair

  1. Press the chrome part in the areas indicated in the image.
  2. Slide the chrome part.
  3. Open the photocell by separating the pieces from the bottom part.

INSTALLING THE PHOTOCELL

motorline PROFESSIONAL MFE Modulated Reflective Infrared Pair - Fig
1

FIXING THE PHOTOCELL

motorline PROFESSIONAL MFE Modulated Reflective Infrared Pair - Fig
1

  1. Place the photocell base in the desired location so that the power cable passes through the hole in the base.
  2. Mark the location of the 3 fixing holes and drill the holes.
  3. Secure the photocell with suitable bushings and screws.
  4. Connect the wires to the circuit board (wiring diagram image).
  5. Turn on the photocell without placing the photocell cover.

MIRROR PLACEMENT

motorline PROFESSIONAL MFE Modulated Reflective Infrared Pair - Fig
1

  1. Place the mirror in front of the photocell, with the help of the light from the photocell.
  2. Make use of the indicator lights to set the best location for fixing the mirror.
  3. Mark the location of the fixing hole and drill.
  4. Secure the mirror with the appropriate bushing and screw.

PHOTOCELL TUNING

motorline PROFESSIONAL MFE Modulated Reflective Infrared Pair -
Fig4

  1. If there is no signal, or if the signal is low, use the tuning screws to adjust the direction of the light to increase the signal.

WIRING DIAGRAM

The MFE is designed to protect any light disturbance. However, too much light can cause unstable conditions with the sensor, such as; strong sunlight directed or reflected exactly in the sensor’s field of view. It is recommended to avoid such installation.
The existence of ice, snow, fog or smoke can interfere with the operation of the photocell.

**MFE**

Documents / Resources

| motorline PROFESSIONAL MFE Modulated Reflective Infrared Pair [pdf] Instruction Manual
MFE Modulated Reflective Infrared Pair, Reflective Infrared Pair, MFE Modulated Infrared Pair, Infrared Pair
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

motorline PROFESSIONAL User Manuals

Related Manuals