EXOST 360 Aquacross Remote Control Car Instructions

EXOST 360 Aquacross Remote Control Car

Installing batteries in the transmitter

1. Open the battery compartment.
2. Insert batteries, respecting the + and – polarities.
3. Replace the cover.

Installing the vehicle battery

1. Make sure the ON/OFF switch is set to OFF.
2. Open the battery compartment.
3. Connect the battery to the vehicle.
4. Replace the cover.

Starting

1. Start the car.
2. To move the car forwards or backwards, push the throttle lever forwards or backwards or press the trigger (depending on the model).
3. To turn the vehicle left or right, press the steering lever to the left or right. Or, depending on the model, turn the steering wheel or move the 2 levers in opposite directions to turn.
4. To stop the vehicle, release the throttle lever.
5. 360o flip the vehicle, go striaght-on on the remote control and suddenly go backward the vehicle will flip and then go forward. You can also do the inverse.
6. The vehicle also can drive on water.

TROUBLESHOOTING GUIDE

• Make sure the vehicle power is on.
• Make sure the batteries in vehicle have sufficient charge.
• Check if the batteries in transmitter and vehicle are inserted with correct polarity.
• Check if the distance between transmitter and vehicle will not exceed more than 25m.
• Two or more vehicles of the same frequency will interference with each other. In such a case, move to another place or try after a while.

WARNING

CHOKING HAZARD – Small Parts. Not for Children Under 3 years

Manufacturer
Silverlit Toys Mfy Ltd. Rm 1102, 98 Granville Road, Kowloon, Hong Kong

Imported/distributed by
SILVERLIT SAS 80, rue Barthelemy Danjou 92100 Boulogne-Billancourt France

The symbol showing a crossed-out rubbish bin indicates that ordinary batteries, rechargeable batteries, button batteries, battery packs etc. should not be disposed of with household waste. Batteries are dangerous for health and the environment. Help to protect the environment against health risks. Ask your child to dispose of batteries cleanly by taking them to your local collection points. In this way, batteries can be recycled safely.

WARNING ! Not suitable for children under the age of 3. Contains small parts which can be detached and swallowed. Risk of suffocation. Right is reserved to effects changes in colors and technical details. MADE IN CHINA. Hereby, Silverlit Toys Manufactory Ltd declares that the radio equipment type SK17049 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.silverlit.com/a/certificate

• Waste electrical and electronic equipment (WEEE): When this device reaches the end of its life, please remove all batteries and dispose of them separately. Take electrical devices to a collection centre for electronic equipment and household appliances. Other components can be disposed of with household waste.
• The use of the product may be disrupted by electromagnetic interference. If this is the case, switch the device off and on again following the instructions in the user manual. If the functions are not reset, move to another location.

SAFETY CIRCUIT
During use, the internal power in the electric circuit can get quite high (for example during a 360 spin). In such a case safety circuit will shut down the vehicle for approximatively 1 minute. During this period the car will not respond to signals from the transmitter. This is not a defect but a safety measure to protect the electronic circuits. After this period, the car will resume normal operation.

Instruction sheet and packaging must be retained since it contains important information.

Safety precautions

• Parents: please read the instructions with your children before using the product for the first time.
• Stop the vehicle with the remote control before picking it up.
• Keep hands, hair and clothing away from moving parts when the toy is operating.
• Do not use the vehicle with the radio control in the street. Avoid collisions with people, animals and furniture.
• Warning: any change or modification made to this product that is not expressly approved in the relevant section of the declaration of conformity may terminate the usage authorisation granted to the user.

USB cable statement

• If battery cannot be charged, Please try another adapter.
• The product must only be used with the provided USB cable for charging.
• Do not use high output adapter for battery charging (1A or above).
• Transformer or battery charger used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they must not be used until the damage has been repaired.

Batteries required for the transmitter

• Power supply
• DC 3 V / 0,5 W ; 2 x 1,5 V “AAA” / LR03 / AM4
• not included

Battery warning

• Non-rechargeable batteries are not to be recharged. (transmitter)
• Rechargeable batteries are to be removed from the toy before being charged. (vehicle)
• Rechargeable batteries should be charged under adult supervision.
• Different types of batteries or new and used batteries are not to be mixed.(transmitter – Only batteries of the same or equivalent type as recommended are to be used. (transmitter – Batteries are to be inserted with correct polarity. (+ and –) (transmitter)
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• Do not mix old and new batteries. (transmitter)
• Do not mix alkaline batteries, standard batteries (carbon- zinc) and rechargeable batteries (nickel-cadmium). (transmitter)
• Caution : first charge must be not less than 4h to optimize battery efficiency

Batteries required for the car

• Power supply
• DC 3,7 V / 9W / 500 mAh / Li-ion Battery
• included

Care and maintenance

• Always remove the batteries from the toy if it is not used for a long time.
• Wipe the toy gently with a clean cloth.
• Keep the toy away from direct sources of heat.
• Replace batteries when they become less powerful.
• Operation temperature 5 – 35°C
• Receiver Category 3
• Do not immerse the product in water unless the battery compartment is properly closed and locked.
• The toy is to be operated in water only fully assembled in accordance with the instructions.
• Do not drive in salty water.
• Operate on smooth water, such as pools and ponds.
• Never immerse remote control in water.
• Always remove product from water when not in use.
• Keep the product away from obstacles / peoples or animals in pool.

Charger Statement

• Do not operate battery charger if it has been damaged in anyway.
• This product must only be used with the recommended charger.

Frequency Band Range: 2.400 – 2.483GHz Maximum Radio-Frequency Power:<10mW This toy is only to be connected to equipment bearing either of the following symbols

References

• Certificate – Silverlit
• Our Story – Silverlit

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>