rizoma GRDW205Z10 Sport Ride by Wire User Manual

June 9, 2024
rizoma

rizoma logo GRDW205Z10 Sport Ride by Wire
User Manual

Welcome to Rizoma

Before you start
We are pleased to welcome you into the world of RIZOMA, and we congratulate you for your excellent choice. Please carefully follow the instructions in this guide, which will allow you to mount and use the product correctly and enjoy all the features it has. For your protection and safety, RIZOMA expressly recommends that you have the installation of the product performed by skilled personnel. Improper installation, repair or maintenance, can cause accidents. Keep this user guide as a reference for the future. RIZOMA accepts no liability for any damage, of any kind, which may be caused, directly or indirectly, to persons or things as a result of incorrect assembly or failure to observe all the assembly instructions. We also invite you to comply with the provisions of the Highway Code and Traffic rules and/or to additional regulations in force in your Country.

General conditions

**Attention:**   This component comes assembled for shipping purposes only.  Tighten all fasteners to appropriate torque specifications before riding.
Descriptions preceded by this symbol contain information, instructions, or procedures, which, if not followed, may result in death or serious injury.

  1. Carefully read, understand and follow these instructions, they are an essential part of the product.  If you have any doubt whatsoever regarding the installation or use of your RIZOMA product, please see your authorized RIZOMA dealer for assistance (on www.rizoma.com).
  2. For correct installation, all tightening has to be done after  the correct positioning of  the accessories without restricting the moving parts, to not compromise the correct functioning of the product.
  3. After installing any Rizoma product, please check that all related components of the motorbike function e.g. brakes, throttle, clutch, lights and steering. We strongly suggest to repeat these checks periodically, especially after long trips or prolonged periods of not using the bike.

Your RIZOMA products require regular inspection and maintenance. The more you ride the more often you must inspect your RIZOMA products. If your products are leaking, bent, deformed, cracked, chipped or worn, no matter how slight, immediately have a RIZOMA dealer inspect the products before you ride again. In any case never try to repair or modify the Rizoma products or their components, always replace with Rizoma original components.
Rizoma products may not be compatible with your motorcycle or with other aftermarket equipment installed before. For your safety Rizoma suggests to always contact your RIZOMA dealer.
O.E.M.: original equipment manufacturer.

Grips Sport Ride by Wire

rizoma GRDW205Z10 Sport Ride by Wire - fig 1Sport grips combine simplicity and Sportiness. Made entirely from billet aluminum, racing rubber sleeve ensures outstanding grip and reliability. The Ride By Wire version is also compatible with an electronic control system.

Before you start mounting the product please check the completeness of the kit on the part list. The difficulty level and the time of assemblage shown do not include the removal of OEM components.
Improper installation can cause the throttle to remain open after it is released, resulting in loss of motorcycle control, an accident, personal injury or death. Before riding, open and release the throttle at various positions along its travel to make sure that the throttle operates smoothly and forcefully snaps back to the closed position. If there is any delay or if the throttle remains open, even for an instant, remove and re-install the throttle. See your retailer for assistance or advice.rizoma GRDW205Z10 Sport
Ride by Wire - fig 3

MONTAGGIO BOCCOLA INSTALL BUSHING
rizoma GRDW205Z10 Sport Ride by Wire - fig 4 MONTAGGIO MANOPOLA SX INSTALL LH GRIP
rizoma GRDW205Z10 Sport Ride by Wire - fig 5

WARNING: FOR THE CORRECT MOUNTING FOLLOW THE STEPS:
-INSERT COMPLETELY THE GRIP (TO USE POSITION);
-REMOVE THE GRIP OF 20mm; -APPLY A SMALL LAYER OF SILICONE ADHESIVE;
-INSERT COMPLETELY THE GRIP AND CLEAN THE SILICONE ADHESIVE IN EXCESS.
SERRAGGIO GRANI MANOPOLA SX TIGHTEN HEADLESS SCREW LH GRIPrizoma
GRDW205Z10 Sport Ride by Wire - fig 6

**Once in position tightening the headless screw with thread locker medium.rizoma GRDW205Z10 Sport Ride by Wire - fig 7 ATTENTION: DON’T DAMAGE THE THROTTLE CAM TAKE CARE AT THE INSERTION OF TOOTH IN THE HOUSING.
MONTAGGIO GUSCI INSTALL SHELLSrizoma GRDW205Z10 Sport Ride by Wire -
fig 8 ** – Open the shells of the throttle, insert the RH grip and close the shells. Before riding, open and release the throttle grip at various positions along its travel to make sure that the throttle operates smoothly and forcefully snaps back to the closed position.

Warnings

RIZOMA reserves the right, in its sole discretion, to make changes to the product and this information at any time and without prior notice. Although many catalogs and advertisements depict riders engaged in extreme or stunt riding, this activity is extremely dangerous, increases the risk of an accident, and increases the severity of any injury.
The action depicted is performed by professionals under strictly controlled riding conditions.
Only you know the limits of your riding ability and only you can control the conditions under which you ride. By and in consideration for his/her purchase and use of the RIZOMA product, the user expressly recognizes and agrees that in the event of any claim arising out of the use of this RIZOMA product, whether such claim is based in contract, warranty, tort (personal injury or wrongful death) or otherwise, the laws of the Republic of Italy shall apply and jurisdiction and venue for any such action shall be in the Courts of Busto Arsizio, Italy.
All riders are strongly urged to take a motorcycle rider safety clinic. Always wear a properly fitted and fastened motorcycle helmet (RIZOMA recommends a full face helmet), that has been approved by ANSI , SNELL, CE, or any other relevant authority, and any other safety equipment necessary for your riding style, such as full finger gloves, boots, and body armor.
Be sure to read and follow all the instructions and warnings that originally accompanied your motorcycle, as well as the literature that accompanied any other component parts installed on your motorcycle.
Be sure that your tires are inflated to the correct pressure and that there is no damage whatsoever in the tread or sidewall of the tire.

Legal notes

Some of our products may not be approved for road circulation in the countries where homologation is required.
Thus RIZOMA® srl declines any responsibility for a different use of its products.

rizoma logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals