Xonox X72A9619 Compact wardrobe “Torino” width 90 cm Instruction Manual
- June 9, 2024
- Xonox
Table of Contents
- Xonox X72A9619 Compact wardrobe “Torino” width 90 cm Instruction Manual
- Installation instructions
- Our direct order service for fitting
- B*(Colli 1/1)
- Dear Customer
- Do not use any abrasive cleaning materials!
- Attention! Notice!
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Xonox X72A9619 Compact wardrobe “Torino” width 90 cm Instruction Manual
Installation instructions
Our direct order service for fitting
If a fitting part is missing, you can e-mail this service card directly to the
address below. However, we can only send fitting parts in this way. If you
have any other cause for complaint concerning
your item of furniture, please contact your furniture store directly.
B*(Colli 1/1)
Dear Customer
As a furniture manufacturer we would like to point out that an attachment is
only as good as the connection between the attachment material (dowel) and
masonry. In the case of suspension elements you should check your masonry and
only use the appropriate dowels from a specialist store. Ultimately it is the
person carrying out the installation who is responsible for attachment to the
masonry.
The installation and laying of electrical lines and other items must only be
performed by authorised specialists. Please note the descriptions and weight
information in the installation instructions.
Please observe the stated maximum weights; in the case of mechanical overloads
caused by playing children, other individuals, materials etc. we do not accept
any liability as the manufacturer of the furniture!
The furniture is only guaranteed to work perfectly if it is set up to be plumb
and\ horizontal. The doors have been pre-adjusted, but may need to be
realigned/readjusted in accordance with local conditions!
All electrical installations have been produced in accordance with the latest
norms and regulations, such as those of the VDE (Association of German
Electrical Engineers),
CE and MM. The power of the bulbs to be used is marked on the respective light
fitting. If the maximum number of watts stated on the fitting is not complied
with, there is a danger of fire from overheating. Covering the lamps and bulbs
is strictly prohibited due to the danger of fire!
All screws and load-bearing connecting parts should be tightened after 5 to 6
weeks in order to ensure long-term stability!
Do not use any abrasive cleaning materials!
If the operating or installation instructions are not complied with,
modifications are carried out to the products, parts replaced or consumable
materials used which do not
correspond to the original parts, all warranty or liability claims shall
become null and void.
Attention! Notice!
Our high gloss surfaces have a protective foil when delivered. Please leave
this foil on the furniture until it is completely assembled and all dust has
been removed. To maintain the valuable high gloss appearance, you should .
expose the high gloss foil to the room air for an hour to allow it to harden
after removing the protective foil. . only use a damp cotton cloth and a small
amount of glass cleaner to clean the surfaces. . Do not use any aggressive
cleaners with additives. . Rub off the surfaces with a wet rag. . Do not use a
steam cleaner. . Do not damage the surface with sharp objects. . Do not in any
case expose the surfaces to intense sunlight
We wish you plenty of enjoyment with your new furniture.
Your product development team