InstaTrim IT75WHT50 3/4 in. x 50 ft. White PVC Inside Corner Self-adhesive Flexible Caulk Instruction Manual

InstaTrim IT75WHT50 34 in. x 50 ft. White PVC Inside Corner Self-adhesive Flexible Caulk

HOW ARE INSTATRIM PRODUCTS DIFFERENT FROM ALL THE OTHER CAULK STRIPS ON

THE MARKET?

With our Patented “wing” design and a proprietary high-performance adhesive, InstaTrim products will conform and seal to almost any application surface including ceramic tile, laminate, solid surfaces, wood, metal and much more.

Caulk strips you may have seen on the market are mostly made in China, are bulky, unattractive and use sub-par two-sided tape for adhesive. These products have the reputation of being cheap-looking with adhesive that does not last. Insta Trim products are easy to use, mess-free, last for years and will leave your project looking clean and professional, every time

HOW DO I KNOW WHAT SIZE TO ORDER?

There are currently two widths of InstaTrim products available. Half-inch wide will cover gaps up to ¼-inch wide and ¾-inch wide strips will cover gaps up to 3/8-inch wide.
NOTE: We’re creating a new, one-inch wide trim for larger gaps – expected to be ready in late-2022

HOW DO I PREVENT WATER FROM GETTING UNDER THE TRIM AND CAUSING MOLD AND

MILDEW?

With five US Patents on the design, the wings are designed to push back against the surface beyond the adhesive creating an extra layer of protection from moisture, dirt and air.
When you push the strip into the corner, the adhesive will spread and grab onto the surface. Some of the adhesive will spread onto the edges of the wings to help keep moisture from seeping under.
In addition, we use high-grade PVC that contains a UV stabilizer and a fungicide to keep mold and mildew from growing.

WHEN USED ON TILE, HOW DOES INSTATRIM STICK TO THE DIPS BETWEEN THE

TILES?

Instar Trim will conform to most grout lines provided they are not deeper than about 1/16 to 1/8 inch.
The putty-like adhesive will conform to the grout lines. If you are still able to see small gaps under the wings and to ensure water doesn’t get behind the wings, or for deeper grout joints, you can add a small amount of non-silicone caulk to fill the small gaps as needed.

DOES INSTATRIM WORK ON CURVES AND HOW DO I INSTALL IT AROUND CORNERS?

Our products are flexible enough to smoothly go around curves. If the curve is tight, Instagram may not be right for the job. However, we have found that warming up the trim with a hairdryer prior to installation will soften the PVC enough to allow it to bend easier around curves. When the strip cools down, it will remain in the curved shape.
For 90-degree corners a mitered splice is required. Full instructions on how to do this can be found in our downloadable “Instructions PDF”.
NOTE: New Corner & End Trim Caps will be available Spring 2022. The caps will make it even easier for you to finish your trim projects.

I FOLLOWED THE INSTRUCTIONS, WHY ISN’T THE ADHESIVE STICKING TO THE

SURFACE?

There are a few factors that could be causing the adhesive to fail. Most likely, there is old silicone caulk or residue from silicone on the surface. Silicone is unique in that no other adhesive will stick to it, that’s why it is very important that all silicone be removed 100% for successful adhesion of Interim strips. The good news is, that silicone and silicone residue can be removed. Silicone removal instructions can be found on our downloadable “Instructions PDF.”
If your surface has silicone on it, remove as much as you can with a razor blade. Apply a silicone remover product to help dissolve the old silicone. We have had success with McCance Products, WD40 and acetone. It will also help to scrub with a scrubby sponge for effective removal. Wipe the surface vigorously with acetone and a lint-free cloth and let the surface dry completely. Please make sure to properly vent the room, as some silicone removal products emit toxic fumes.
Another thing that is important to remember is that you must push the strip firmly into the application corner. This makes the adhesive spread slightly causing it to grab onto the surface and stay stuck for a long time.
NOTE: Some tile and counter surfaces have a thin layer of silicone on them to prevent water from soaking in. This will be harder to remove, but it is still possible.

 HOW DO I KNOW IF THERE ISSILICONE ON THE SURFACE?

Silicone caulk is a “rubbery” textured product with unique characteristics not common to any other material. If Insta Trim products aren’t sticking or losing the adhesion in a short period of time, most likely there is silicone residue on the surface. Full instructions on how remove silicone and prep the surface can be found in our downloadable “Instructions PDF”.

CAN I USE INSTATRIM ON EXTERIOR SURFACES IF I LIVE IN A CLIMATE THAT GETS

EXTREMELY HOT OR COLD?

Yes, you can! For best results and ease of use, we recommend installing the trim strips when the air temperature is around 65°F to 70°F. Once installed, it will remain attached in any temperature. Our products are manufactured in and distributed from Minnesota where our testing involves exterior surfaces in all weather extremes.

WHAT IS YOUR RETURN POLICY IF IT DOESN’T WORK FOR MY PROJECT?

Insta Trim is 100% guaranteed and can be returned for a full refund (less shipping costs) within six months of purchase.

HOW DO I REMOVE INSTATRIM IN THE FUTURE?

Instar Trim can be easily removed at any time. Use a putty knife to gently lift the end of the trim strip, grasp the end and slowly pull it backward and away from the surface. Some adhesive will remain, however you can remove most of it with a razor blade or your fingers. Our adhesive sticks to itself very well, so you can ball up a small amout and rub it on the remaining bits to pull the smaller pieces of adhesive from the surface. Follow up with acetone and a soft cloth to dissolve any remaining residue.

DO YOU SELL INSTATRIM IN OTHER COUNTRIES?

Insta Trim Products are available to the US, Canada and United Kingdom from our website, www.InstaTrim.com and to the following countries: Germany, France, Italy, Poland, Netherlands, Sweden, Spain, and the United Kingdom through Amazon.

Don’t see the answer you’re looking for or need help troubleshooting? Contact us at directly at: customersupport@instatrim.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>