UGREEN CM496 AC650 High Gain Dual Band Wireless USB Adapter User Manual
- June 4, 2024
- UGREEN
Table of Contents
UGREEN CM496 AC650 High Gain Dual Band Wireless USB Adapter
Preface
Thank you for purchasing the UGREEN products. For optimum operation, please read this manual carefully before using.
Package Contents
Product Overview
About Driver
- Windows users: the product includes a built-in wireless driver, Windows users that use Windows XP 32-bit/Windows 7 or later please follow steps below to complete installation.
- Windows XP 64-bit/macOS/Linux users: visit UGREEN official website and search “CM496 (Product Model) “, or go to “T a>”NEWFIK” to find the driver for installation.
Step 1. Driver Installation
(Take Windows 10 as an Example)
-
Insert the adapter into USB port of your PC/laptop.
-
The “Wireless” Window will pop up at the bottom right corer on your screen, please double click and select “Setup.exe” for further installation.
Tip: If the popup window doesn’t show up, please select “I his PC” and double click “Ugreen Wireless” icon. Note: Windows 8.1/10 “This PC”, Windows XP “My Computer”, Windows Vista to Windows 8 “Computer”,
Step 2. Connect to Wireless Network
(Take Windows 10 as an Example)
-
Click or at the bottom right corner of your PC/laptop.
-
Select your Wi-Fi name, and enter the password to connect
-
If the connection is successful, then you can start using the wireless network.
Tip
- You can try to adjust the direction of antenna for a better performance when the signal is not stable enough.
-
90-degree Rotation
-
180-degree Rotation
Specifications
Notes
- Do not leave the product in the moist environment.
- Do not forcibly plug or unplug the product in case of connector damage.
- Keep out of reach of children.
CE Mark Warning
RF warning statement:
Limit for General Population/uncontrolled exposure should be applied for this
device, it is 2.0 W/kg as averaged over any 10 g of tissue. The highest
reported 10g-SAR for body is 0.389 W/kg.
Body-worn Operation:
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 5mm is used between
the user’s body, including the antenna. Body-worn accessories that do not meet
these requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna.
- Product name: AC650 High-Gain Dual Band Wireless USB Adapter
- Product model: CM496
- Manufacturer: Ugreen Group Limited
- Operation frequency(Max power):
- 2.4G WiFi: 2412MHz-2472MHz(20dBm)
- 5G WiFi: 5180MHz-5240MHz(17.5dBm); 5745MHz-5825MHz(14dBm)
This product can be used in EU countries and regions, including: Belgium (BE), Bulgaria (BG), Czech Republic (CZ),Denmark (DK), Germany (DE), Estonia (EE), Ireland (IE), Greece (EL), Spain (ES), France (FR), Croatia (HR), Italy(IT), Cyprus (CY), Latvia (LV), Lithuania (LT), Luxembourg (LU), Hungary (HU), Malta (MT), Netherlands (NL), Austria(AT), Poland (PL), Portugal (PT), Romania (RO), Slovenia (SI), Slovakia (SK), Finland (FI), Sweden (SE) and United Kingdom (UK).
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall
be provided as follows:
Hereby, Ugreen Group Limited declares that radio equipment type CM496 is in
compliance with Directive 2014/53/EU, and this product is allowed to be used
in all EU member states.
The full text of the EU declaration of conformity is available at following
company website: http://www.Ugreen.com
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
RF warning statement:
This device comply with FCC SAR requirements. The highest reported 1g-SAR for
body is 0.959 W/kg, the SAR limit is 1.6 W/kg averaged over 1g of tissue.
Body-worn Operation:
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 5mm is used between
the user’s body , including the antenna. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.