neberon HS03 Heated Socks User Manual
- June 9, 2024
- neberon
Table of Contents
HEATED SOCKS
USER MANUAL
HS03 Heated Socks
Please carefully read the user manual before using the product and keep it well for future reference.
SAFETY INSTRUCTIONS AND WARNINGS
To reduce the risk of burns, electric shock, and fire, the products must be used in accordance with the following instructions.
- Do not use the products while sleeping if they are connecting to the batteries.
- Not recommended for infants or babies.
- The products are not to be used by a person with poor blood circulation unless he/she is carefully attended.
- Do not use products on the skin that is insensitive to heat.
- Never pull the socks to unplug them from the batteries.
- Do not use the cords in the socks as handles.
- Never use the products if the cords show any sign of damage.
- Only use the original batteries provided by us.
- Do not attempt to disassemble or alter any part of the products.
- Do not expose the products to high temperatures.
- Always remove the batteries from the socks when they are not in use.
- Do not wring out the socks as this may cause damage to the heating elements or wire hardness.
- It is not recommended to use the heated socks for more than 3 years, or 400 washing cycles.
- Dispose of the batteries according to the local environmental regulations. Do not treat them as household waste.
WHAT’S INCLUDED
Socks xl Pair | Charging Cable for the Batteries xl |
---|---|
Battery x2 | Carrying Bag xl |
Remote xl | User Manual xl |
PRODUCT OVERVIEW
|
---|---
CHARGE
Please fully charge the batteries at your first use because the battery power may be drained due to long-term transportation. Properly connect the Charging Cable with two batteries and a compatible adapter, then connect the adapter to a rated AC outlet(110V-220V).
- A guide to the Battery Power Indicators Charging: Flash Green Fully Charged: Solid Green
Notes:
- One indicator stands for 25% power.
- When the battery power is too low, the Battery Power Indicator flashes 10 times and then the battery shuts down.
Battery warnings
- Do not store the batteries below -4°F(-20°C)
- Do not allow the batteries or charging cable to come in contact with water or other liquids. If water or liquid is entering into the batteries, immediately unplug them from the socks.
- Do not expose the batteries to direct sunlight or heat source as this may cause an explosion.
- Do not charge the batteries when they are hot. Let them cool down first.
- Do not charge the batteries next to flammable materials or on electrically conductive surfaces.
- Do not allow any impact on the batteries.
- Do not dispose of the batteries in a fire. Do not cut or mechanically crush the batteries. These may cause an explosion.
BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY
PAIR THE REMOTE WITH THE BATTERIES
The products come with a remote, which allows you to adjust the heat level of
batteries via this remote. Generally, the batteries and the remote were paired
with each other by default.
If the remote cannot control the heat level of batteries after the batteries
are powered on, please re-pair them following the instructions below.
Step 1:
Long press the power button on one battery to power it on.
Step 2: Within 1.5 seconds after powering on, quickly press the Power Button 3 times and the Heat Level Indicators flash red, green and blue simultaneously. Step 3: Press the Pair and Toggle Button on the remote to finish the pairing. Step 4: Repeat the same steps from 1 to 3 for another battery.
Tips:
- The effective distance of the remote is about 3 meters.
- You can pair the remote with the batteries for once and use it to control all the time due to the smart memory function of it.
WEAR YOUR SOCKS
Step 1: After pairing, please connect the Power Cables in the socks with the batteries. Step 2: Power on the batteries. Step 3: Put the batteries into the compartments and wear the socks.
HEAT LEVELS ADJUSTMENT
-
Via the Remote
Press the Pair and Toggle button to toggle the heat levels among Low, Medium and High. -
Via the Battery
After powering on, press the Power Button on the battery to toggle among low heat level, medium heat level, high heat level and standby mode.
Heat Level | Temperature | Heating Duration |
---|---|---|
Low(Blue LED) | 110°F-115°F(43°C-46°C) | 7-7.5 Hours |
Vedium(Green LED) | 130°F-135°F(54°C-57°C) | 5.5-6 Hours |
High(Red LED) | 140°F-150°F(60°C-65°C) | 4-4.5 Hours |
OUTPUT PROTECTION
When the batteries are not connected to the socks to supplying any power or a short circuit occurs, the batteries will enter standby mode.
WASH INSTRUCTIONS
Important:
Remove the batteries from the socks before washing.
A Hand wash or machine wash on a gentle cycle in cold or warm water (below
86°F/30°C). Please air dry the socks after washing.
SPECIFICATIONS
Battery Capacity | 4000mAh |
---|---|
Heating Duration of One Battery | 4-7.5 Hours for Heating Socks |
DC Output Voltage | 3.7 V |
Heat Level | 3 Levels(Low, Medium, High) |
Type-C Input | 5V/1A |
Thank you for purchasing our product.
If you have any questions or neec any assistance, please contact us at s
upport@neberon.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>