Molly Lac JMD-102 PRO Nail Drill User Manual
- June 9, 2024
- Molly Lac
Table of Contents
JMD-102 PRO Nail Drill
User Manual
Technical parameters:
Model: JMD-102PRO
Certificate No .: HTT191011268E / HTT191011268L
Maximum power: 30W
Turnover: 0-35000RPM
Power supply: rated input: 100-240V 50-60Hz
Rated output: DC 12V
Spindle: 2.35mm (3/32 ”)
Function description
The perfect set of nail styling tools. The nail drill has two directions of rotation, for left and right hand nail stylists, adjustable rotation speed, from 0-35000RPM, a quiet and smooth handle with a flexible extension, which is useful when finishing styling.
Functionality:
- Simple operation: one button is responsible for both the power supply (ON / OFF) and the direction of rotation.
- Clear response: different colors of the ring around the power button indicate different operating modes.
- Easier storage: the cutter case is designed to fit into the housing of the device, which allows easy and safe storage of cutters.
- Convenient to use: the case for cutters can additionally serve as a support for the milling handle, which is very useful during work.
Fashionable Design:
- Stylish shape: The feature of the device is simple, geometric, fashionable shape.
- Original design: concentric circles give the router a dynamic look.
Instructions for use:
- Press the power button for 3s until the light is on and flashes slowly, which means the device is in standby mode.
- Press the power button again, the light will turn blue, which means the cutter will turn clockwise.
- Turn the milling machine knob to change and adjust the speed of rotation.
- Press the power button again for the cutter to reverse. The light will turn red.
- After finishing work, press and hold the power button for 3 seconds until the device goes into standby mode.
- To turn the device off, press and hold the power button again for 3 seconds, until the ring goes out and the router turns off.
Key features:
- Smart, advanced design: one button for START / STOP control.
- Changing light, depending on the operating mode of the milling machine.
- Case for cutters is designed to fit into the housing of the device, which allows easy and safe storage of cutters. In addition, it can be used as a support for the milling machine handle, which is very useful during work.
- The engine is designed with attention to its efficiency and quiet operation.
Precautions:
- Please read the operating instructions for the device before using it.
- Do not change the direction of operation too often as this may damage the nail drill head.
- The cutters must not be changed while the nail drill is on. Switch off the router or reduce the revolutions to a minimum.
- Do not allow the device to get wet, flood the device with water or other liquids to avoid damage, short circuit or electric shock.
- Disconnect the power from the device when it is not used for a long time.
IMPORTER
MollyLac
Michał Szewczyk
270 Piotrkowska St.
mollylac.com
Made in P.R.C.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>