LostSoul HST-160 Bluetooth Telephone Headset User Manual
- June 9, 2024
- LostSoul
Table of Contents
Bluetooth Telephone Headset
Model:HST-280
User Manual
Product Display
Dongle+Headset
First, Insert the Dongle into the PC, long press the button to enter the
pairing mode,the red and blue lights flashing alternately.
Second, take out the headset and put it close to the Dongle, the blue light is
always on when the Bluetooth connection is successful.
Instructions
Power
ON/OFF| Power On| Lone press power button for 2s| Blue light on IS
---|---|---|---
Power Off| 1:Lone press power button for 2s
2:Battery less than 3.1V
3:Without connection 10 min| Red light on is
Pairing| Enter Pairing| 1:Long press 4s power button from power off|
Alternating red
2:Double click power button| and blue
Cancel Pairing| Click once power button| Blue light blinks once for 500ms
Clear Pairing list| Clear Pairing list| Long press power&teams for 4s| Red
light flash 3 times
lusic| Play/Pause| Click once multifunction button| / 1
Previous song| Long press Vol+ for is| /
Next song| Long press Vol- for is| /
Volume +| Click once Vol+| /
Volume –| Click once Vol-| /
Call| Answer call| Click once Teams button| The blue light flashes until you
answer
Hang up| Click once Teams button| /
Reject| long press Teams button Is| /
Mic Mute| Move the stalk away from your mouth/Click once power button (Wheat
stalk preference)| /
Mic Unmute| Move the straw close to your
mouth/Click once power button (Wheat stalk preference)| /
Product Specifications
- Model: HST- 280
- Item: Telephone headset
- Bluetooth Chip: QCC3034
- Bluetooth version: Bluetooth 5.1
- Channel: Stereo
- Noise reduction: Dual mic CVC 8.0
- Speaker: 040mm
- Impedance: speaker: 32Q ± 15%
- Charging time: -1.5h
- Playing music time: about 34H
- Call time: about 28H
- Standby time: 350+
- Dimension: 162. 32*181. 85mm
- Compatible system:Windows 7/8/10 , MAC OS
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without
restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>