KOHO GM100 Wireless Gaming Joystick User Guide

KOHO GM100 Wireless Gaming Joystick

Thanks for using this product. It sa one hand gamepad, can control mobile phones and tablets. Support Android and Ios system. This product has been successfully invented and used after many tests. It is reasonable and professional designed according to human engineering, which makes it more flexible and comfortable to use

This product has applied for national use, appearance patent, invention patent, intellectual property rights, and passed the CE, FCC, RoHS certificates. The product comes with user manual. Product are subject to be changed and updated after sale without further notice.
Remark: If any, counterfeit, imitation, etc., the company has the right to investigate its legal responsibility.

How to install to mobile phone

Put the phone on the spring pad according to the position shown, and press the phone down then push the phone into the slot.

Product button Introduction

1OS open a browser to scan and download app:
Shooting PlusV3

Charging precautions: Activation switch must be set to N for normal charging.The switch at P is for activate the gamepad. (If the activation function is damaged due to user’s misoperation, it is not covered by the warranty.)

GM100 how to connect to Bluetooth

How to use the gaming controller

• Android phone ShanWanGamepad floating window should be always allowed in the authorization management of your phone, and turn on draw over other apps. As shown below

Open settings to activate: Continuously click Android version number or MIUI version number for 7 times to enter developer mode, and open the following options: open developer options, USB debugging, USB debugging [safe mode]. As shown below

Open ShanWanGamepad to connect Bluetooth and prepare to activate.

This product comes with activator, long press the power key for 3 seconds to boot, after Bluetooth connected, shift the activation switch to P, then insert the connector to the gaming controller, connect to data cable, the type cUSB side connect to mobile phone. As shown below

How to activate the gaming controller:

1. Active-Device- (make sure the manual switch is at P from Gaming controller)-Next step -No data transfer-OK- Activation completed.
2. The light will slowly flash, until the App shows it is activated.
3. After activation, shift the manual switch to N.
4. Click on the game you want to play, click ShanWanGamepad floating window “+” to set A key and L3 key function to save. As shown below

For iphone

1. When screen is on, turn off “assistive touch” from settings.
2. Download app “Shooting PlusV3” from app store, Shooting Plusv3 floating window should be always allowed in the authorization management of your phone.
3. Click the game you want to play, click Shooting PlusV3 floating window “+ to set up A key and L3 key function and save.
   As shown below

Attention

1. This product: 1, power key, 2, 10S key, 3, A key, long press have function of switch off the gaming controller.
2. The gaming controller goes into standby after five minutes of inactivity.
3. Long press A key for 3 seconds the gamepad will connect back to Bluetooth automatically.
4. There is a reset button on the back of the gamepad.

Product specification

FCC ID

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Connect the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>