JTC TM-800 Mixer-Blender Instruction Manual

: June 9, 2024
: JTC

Instruction manual
MIXER / BLENDER
Modell JTC OMNIBLEND TM-800 (2 Liter)
Order-No. 329-20151

JTC TM-800 Mixer-Blender

TM-800 Mixer-Blender

Dear customer,
thank you for choosing our mixer. We hope you will enjoy our semi-professional product.
Saro does not guarantee our mixer if it is used for any purpose other than that for which it is intended.
The high-performance JTC OMNIBLEND V TM-800 mixer is ideal for preparing smoothies.
The V TM-800 is a versatile and robust mixer that allows you to puree, grind and mix. Handling and cleaning are really easy:
With just one blade system, wet and dry goods can be processed in just one container.
Pre-programmed running times simplify handling, sealed control buttons make cleaning easier and protect the motor from moisture.
Without noise protection, the V TM-800 achieves a maximum noise level of 85 dB at full speed.
The shatterproof and BPA-free container made of tritan is supplied with a lid with a closable filling opening and a matching plunger.
For cleaning, fill the container to one third with water, add a splash of hand rinsing agent and let the device run for a few seconds at the highest level. Coarse dirt can then be removed with warm water and a soft cloth.
Please read these operating instructions carefully before using the mixer/blender.
We hope you enjoy your new SARO Mixer / Blender!

INTRODUCTION

Before putting this device into operation, read these operating instructions carefully and attentively and follow the instructions given therein.
This manual contains information on the installation, setup, operation, maintenance, cleaning and possible disposal of this device.
This operating manual is an integral part of the device and should be kept accessible at all times, near the device, for all persons involved in the installation, operation, leaning or maintenance of this device.
If the device is passed on to third parties, these operating instructions must be given with it.
Illustrations in this manual may differ from the original article.
We reserve the right to make technical changes to the device.
If these operating instructions are not observed, the safety of the device can no longer be guaranteed.
The manufacturer/dealer cannot be held responsible for damage caused by non- observance of these operating instructions.
Attention! This mixer is only intended to puree, grind, grind and crush ice.

SCOPE OF DELIVERY

1 basic socket including motor
1 Instruction manual
1 plunger
1 blender jug 2 litres tritan (BPA-free)
1 lid with closable filling opening

STANDARDS AND DIRECTIVES

The device complies with the current EU standards and directives.
If required, we can provide you with the corresponding declaration of conformity.
IMPORTANT NOTE
The safety instructions in these instructions for use are marked with appropriate symbols. These indicate possible dangers. The relevant information must be read and observed!

TECHNICAL DATA

MODELL	TM-800
Order No.	329-20151
Material housing	Plastic
Material Container	Tritan (BPA-free)
Material knife	stainless steel
Dimensions	B 205 x T 230 x H 500
Content (l)	2 Ltr
Connection Ph. / kW)	230 / 1 / 50 / 0,95
Weight (netto)	4,45 kg
Engine power	2240 W Maximum power
Blade power	up to 950 W
Speeds	35, 60 seconds
Program buttons	3
Volume	85 dB
Pulse function	yes
Blade direction	left
On/off switch	yes
EAN-Code	4017337 329083

Subject to technical changes

SYMBOL

WARNING!
This symbol indicates dangers which can lead to can lead to injuries.
It is imperative that you adhere exactly to the instructions given on occupational safety and be particularly careful in these cases.
WARNING: DANGER DUE TO ELECTRIC CURRENT!
This symbol draws attention to dangerous situations caused by electric current. If the safety instructions are not observed, the following applies Risk of injury or death!
WARNING: CUT INJURIES
This symbol indicates that there is a risk to the body and health of persons due to sharp blades and/or objects. Risk of injury if not observed!

GENERAL INFORMATION

Before the first start-up, read these operating instructions carefully and observe the instructions given therein.
Keep these operating instructions handy, close to the device.
The manufacturer/dealer cannot be held responsible for damage resulting from non-observance of these operating instructions.
If these operating instructions are not observed, the safety of the device can no longer be guaranteed.
If the device is passed on to third parties, these operating instructions must also be given.
This device must not be operated by children or persons with limited physical, sensory or mental abilities, as they may not recognize the dangers when using electrical appliances and/or cooling devices and accidents, fires, explosions or damage to property may occur.
After unpacking the appliance, make sure that everything is in perfect condition. If you discover any damage, do not connect the device, but inform your dealer.
Check whether all the components specified in the scope of delivery are present. If this is not the case, contact your dealer.
Keep the packaging of the device. The device can only be transported safely in its original packaging.
Please note that all components of the packaging (plastic bags, cardboard, polystyrene parts, etc.) can endanger children and must therefore not be stored near them.
Do not use the device outdoors in the rain!
Before connecting the device, make sure that there is a shock-proof socket (with earthing) and a 230 V connection and that this corresponds to the information on the type plate. Other types of current may cause the unit to overheat.
Observe the accident prevention regulations and general safety regulations applicable to the area of application.
Clean the unit thoroughly before initial operation.
The manufacturer/dealer cannot be held responsible for damage caused by
Non-observance of these operating instructions may result. In addition, the safety of the device is then no longer guaranteed.
In the event of a fault and/or malfunction, switch off the device. Unplug the appliance from the wall outlet and contact your dealer. He will carry out the repair with original spare parts.

SAFETY INSTRUCTIONS

Before the first start-up, read these operating instructions carefully and observe the instructions given therein.
Incorrect operation and improper handling can lead to malfunctions of the device and injuries to the user.
Observe the accident prevention regulations and general safety regulations applicable to the area of application.
Before switching on the mixer, make sure that the container is correctly placed on the motor block and that the lid with the lid insert (cap) is on the container.
Do not place the unit on a hot surface.
Keep away from any heat source and direct sunlight.
Do not use the appliance to crush large ice cubes or frozen foods.
Only use the supplied container. Other containers and accessories not supplied with this unit may cause personal injury.
Do not put dry ingredients in the container before switching on the appliance.
Ensure that the container is filled to only 2/3 of its capacity during the mixing process.
Be careful when mixing hot liquids. Fill the container only to the 1 litre mark. Allow steaming food / liquids to cool down a little, then fill in and mix. Hold the lid firmly. • During operation, the lid with the lid insert (cap) must be on the container.
When switching on the appliance and also during operation, hold one hand on the container.
Always start the mixer in the low position or with one of the keys „35“ – „60“ or „90“.
Only when the knives have come to a complete standstill may the container be removed from the engine block. This also applies to the container cover, which may only be removed when the knives are at a standstill.
Only use the unit on a stable, level and non-slip surface.
If you pull the mains plug, always pull the plug housing and never the cable. Always switch off the appliance first.
Do not touch the appliance, power cord or plug with wet hands.
Do not hang the cable over table corners or sharp edges.
Check the cable regularly. If it is damaged, e.g. by crushing, it must be replaced by a qualified technician.
Do not leave the unit unattended during use. Be particularly careful when children are nearby because they cannot recognize the dangers of handling electrical appliances. • Do not move the device when it is in operation.
Do not put your hand or any objects in the container when the appliance is in operation. They may cause serious injury or damage to the unit.
Be careful with the knife unit. The knives are very sharp.
Always turn off the appliance and unplug the power cord from the wall outlet when cleaning the appliance, when it is to be repaired, when it is not in use, or when removing or inserting the knife unit.
Never immerse the appliance, power cord or plug in water or any other liquid. There is a risk of fatal electric shock!
Repairs may only be carried out by a qualified specialist using original spare parts or spare parts recommended by the manufacturer. Never attempt to repair the unit yourself.
If you do not wish to use the appliance for a longer period of time, unplug the appliance from the mains and clean it.

INSTALLATION, COMMISSIONING AND OPERATION

Before using the mixer for the first time, clean all parts thoroughly with a mild commercial detergent (see Cleaning).
Insert the plug into the socket.
Place the container with the blends on the motor block. Make sure that there is at least enough in the cup to cover the knives.
Small additions of food or liquids that are to be added during mixing can be added to the container by briefly removing the lid insert (cap).
Basically, liquids should first be added to the container, followed by solid food a little later. There must always be some liquid in the container during operation, especially if you want to crush ice cubes, but not large ones.
Fruit, vegetables, meat, etc. to be processed in the container must be cut into small pieces beforehand. The pieces should not be larger than about 2 cm.
Do not fill the container completely. Gradually put small quantities of food into the container for processing.
Place the lid with the lid insert (cap) correctly on the container.
Switch on the machine by pressing the on/off switch (9).
Always start the mixer at the low setting or with one of the keys „35“ – „60“ or „90“.
The „35“ – „60“ and „90“ keys are programmed for automatic mixing and automatic shutdown.

PROGRAM PROCESS

Button 35 is for slow acceleration up to maximum speed. After 35 seconds the mixer is automatically switched off.
Button 60 is for slow start up to maximum speed and repetition. After 60 seconds the mixer is automatically switched off.
Key 90 for slow start up to maximum speed and four repetitions. After 90 seconds the mixer is automatically switched off.
The HIGH, MEDIUM and LOW buttons do not have automatic power off. If one of these buttons is selected, the mixer will remain in operation at this speed. To turn off the unit, simply press any key. The pulse function button for interval operation must be kept pressed to achieve the fastest speed.
The device stops automatically in case of overload. If anything blocks the knives, the motor may heat up. In this case, switch off the appliance and unplug the appliance
Remove the container and place the contents in another container. Allow the appliance to cool down. Then press the reset button on the back or on the bottom of the unit (depending on the model).
Depending on the length of the mixing period, the food to be mixed can warm up. To avoid this, add small amounts of ice to the food to be mixed.
With the tappet, the ingredients can be safely pressed onto the rotating knives to work quickly and efficiently.
When using the plunger, please make sure that the lid is made of soft material which can yield slightly under pressure.
Do not force the plunger, otherwise it could reach the rotating blades and damage the machine/plunger.
Do not operate the BPA-free container (tritan container) with hot food for a longer period of time (less than 90 seconds), otherwise the container could be deformed.
Steaming food / liquids create an even higher pressure in the container, so let it cool down before pouring into the mixer, otherwise the lid could still jump off when you hold it (risk of injury!).
During operation, the motor (carbon brushes) may produce a slight odour. This is normal and not a defect.

ADJUSTING THE SPEED

MED	Average speed
LOW	Low speed
HIGH	High speed
35″	Stored program with switch-off after 35 seconds
60″	Stored program with switch-off after 60 seconds
90″	Stored program with switch-off after 90 seconds

DEVICE PARTS

1	Lid insert (cap)
2	lid
3	bin
4	knife employment
5	Reset button (back or bottom side)
6	drive base
7	Average speed
8	Low speed
9	on/off switch
10	engine block
11	High speed
12	pulse function key
13	After 90 seconds switch off
14	After 60 seconds switch off
15	After 35 seconds switch off
16	ram

CLEANING

The mixer should be cleaned after each use. This prevents food residues from sticking to the container, lid or knives.
Before each cleaning, switch off the appliance and unplug the appliance from the wall socket.
Add some warm water with a mild detergent to the container and let the appliance run for 10 seconds. Then switch off the appliance, remove the container, rinse it with warm water and turn it over to dry.
Do not clean the container in the dishwasher as the water or salt in the dishwasher will attack the knife drive seal. The container can also become deformed due to excessive temperatures.
Clean the engine block with a warm damp cloth and some cleaning agent and dry it off.

UNPACK

Make sure that the packaging is undamaged. The device as well as the accessories are protected and / or fixed for transport. Once the packaging has been opened, remove the
packaging material and any transport securing devices in the form of adhesive tapes or cable ties.
Then check the completeness of the delivery and make sure that neither the device nor the accessories are damaged.
Keep the packaging of the device. The device can only be transported safely in its original packaging. If it is not possible to store the packaging, separate the various packaging
materials and return them to the nearest collection point for proper disposal.
Although the interior of the unit has been cleaned before it was shipped, it is advisable to clean the interior before filling it with goods.

CONNECTION

Connect the device only to a socket outlet with earthing and a 230 Volt connection.
Before connecting the device, make sure that the voltage and frequency of the power supply correspond to the specifications on the type plate! Other voltages can cause the
unit to overheat!

PACKAGING DISPOSAL

**** Please separate the packaging materials accordingly and return them to the responsible collection points for recycling and environmental housing.

DEVICE DISPOSAL

Once the appliance has been used up, dispose of it properly at a collection point for electrical appliances.
Electrical appliances do not belong in household waste.
Your responsible administration will inform you about the addresses and opening hours of collection points.
This is the only way to ensure that old appliances are properly disposed of and recycled. Thank you very much!

Hergestellt in P.R.C. für
SARO Gastro-Products GmbH
Sandbahn 6, 46446 Emmerich am Rhein, Germany
Tel. +49(0)2822 9258-0
Fax +49(0)2822 18192
E-Mailinfo@saro.de
Stand 01/2018 TM / 03/2019