CASIO 3519 Capsule Style Carbon and Bluetooth Installation Guide
- June 9, 2024
- Casio
Table of Contents
3519 Capsule Style Carbon and Bluetooth
MA2212-EA
© 2023 CASIO COMPUTER CO., LTD.
Watch Operation Guide 3519
Contents
Precautions
Operating Precautions User Maintenance Battery Replacement Mobile Link
Precautions
Before Getting Started…
General Guide Indicators Navigating Between Modes Selecting a Timekeeping Mode
Digital Display Format Viewing the Face in the Dark Useful Features
Linking with a Phone
Getting Ready Auto Time Adjustment Receiving CASIO WATCHES Information On the
Watch Configuring World Time Settings Phone Finder Configuring Watch Settings
Changing the Home City Summer Time Setting Recording Your Current Location
(TIME & PLACE) Connection
Connecting with a Phone Disconnecting from Your Phone Unpairing If you
purchase another phone
Time Adjustment
Using Watch Operations to Adjust the Time Setting Using the Watch in a Medical
Facility or Aircraft
World Time
Using CASIO WATCHES to Configure World Time City Settings Checking World Time
World Time City Setting Swapping Your Home Time and World Time
Alarm
Using CASIO WATCHES to Configure Alarm Settings Configuring Alarm Settings
Enabling the Hourly Time Signal Turning Off an Alarm or the Hourly Time Signal
Moving to Another Time Zone
Stopwatch
Measuring Elapsed Time Measuring a Split Time Timing the First and Second
Place Finishers
Timer
Using CASIO WATCHES to Configure Timer Settings Setting the Countdown Start
Time Using the Timer
Other Settings
Changing the Date Display Format Specifying the Day of the Week Language
Enabling the Button Operation Tone Resetting Watch Settings
Other Information
City Table Summer Time Table Supported Phones Specifications Copyrights and
Registered Copyrights
Troubleshooting
OPUM-H
1
Watch Operation Guide 3519
Precautions
Operating Precautions
Water Resistance
The information below applies to watches with WATER RESIST or WATER RESISTANT
marked on the back cover.
Water Resistance Under Daily Use
Marking on watch front or on back cover
Example of Daily Use
No BAR mark
Hand washing, rain
Yes
Water-related work, swimming
No
Windsurfing
No
Skin diving
No
Enhanced Water Resistance Under Daily Use 5 Atmospheres
Marking on watch front or on back cover
Example of Daily Use
5BAR
Hand washing, rain
Yes
Water-related work, swimming Yes
Windsurfing
No
Skin diving
No
10 Atmospheres
Marking on watch front or on back cover
Example of Daily Use
10BAR
Hand washing, rain
Yes
Water-related work, swimming Yes
Windsurfing
Yes
Skin diving
Yes
20 Atmospheres
Marking on watch front or on back cover
Example of Daily Use
20BAR
Hand washing, rain
Yes
Water-related work, swimming Yes
Windsurfing
Yes
Skin diving
Yes
Do not use your watch for scuba diving or other types of diving that requires
air tanks.
Watches that do not have WATER RESIST or WATER RESISTANT marked on the back
cover are not protected against the effects of sweat. Avoid using such a watch
under conditions where it will be exposed to large amounts of sweat or
moisture, or to direct splashing with water.
Even if a watch is water resistant, note the usage precautions described
below. Such types of use reduce water resistance performance and can cause
fogging of the glass. Do not operate the crown or buttons while your watch is
submersed in water or wet. Avoid wearing your watch while in the bath. Do not
wear your watch while in a heated swimming pool, sauna, or any other high
temperature/high humidity environment. Do not wear your watch while washing
your hands or face, while doing housework, or while performing any other task
that involves soaps or detergents.
After submersion in seawater, use plain water to rinse all salt and dirt from
your watch.
To maintain water resistance, have the gaskets of your watch replaced
periodically (about once every two or three years).
A trained technician will inspect your watch for proper water resistance
whenever you have its battery replaced. Battery replacement requires the use
of special tools. Always request battery replacement from your original
retailer or from an authorized CASIO service center.
Some water-resistant watches come with fashionable leather bands. Avoid
swimming, washing, or any other activity that causes direct exposure of a
leather band to water.
The inside surface of the watch glass may fog when the watch is exposed to a
sudden drop in temperature. No problem is indicated if the fogging clears up
relatively quickly. Sudden and extreme temperature changes (such as coming
into an air conditioned room in the summer and standing close to an air
conditioner outlet, or leaving a heated room in the winter and allowing your
watch to come into contact with snow) can cause it to take longer for glass
fogging to clear up. If glass fogging does not clear up or if you notice
moisture inside of the glass, immediately stop using your watch and take it to
your original retailer or to an authorized CASIO service center.
Your water-resistant watch has been tested in accordance with International
Organization for Standardization regulations.
Band
Tightening the band too tightly can cause you to sweat and make it difficult
for air to pass under the band, which can lead to skin irritation. Do not
fasten the band too tightly. There should be enough room between the band and
your wrist so you can insert your finger.
Deterioration, rust, and other conditions can cause the band to break or come
off of your watch, which in turn can cause band pins to fly out of position or
to fall out. This creates the risk of your watch falling from your wrist and
becoming lost, and also creates the risk of personal injury. Always take good
care of your band and keep it clean.
Immediately stop using a band if you even notice any of the following: loss of
band flexibility, band cracks, band discoloration, band looseness, band
connecting pin flying or falling out, or any other abnormality. Take your
watch to your original retailer or to a CASIO service center for inspection
and repair (for which you will be charged) or to have the band replaced (for
which you will be charged).
2
Watch Operation Guide 3519
Temperature
Never leave your watch on the dashboard of a car, near a heater, or in any
other location that is subject to very high temperatures. Do not leave your
watch where it will be exposed to very low temperatures. Temperature extremes
can cause your watch to lose or gain time, to stop, or otherwise malfunction.
Leaving your watch in an area hotter than +60 °C (140 °F) for long periods can
lead to problems with its LCD. The LCD may become difficult to read at
temperatures lower than 0 °C (32 °F) and greater than +40 °C (104 °F).
Impact
Your watch is designed to withstand impact incurred during normal daily use
and during light activity such as playing catch, tennis, etc. Dropping your
watch or otherwise subjecting it to strong impact, however, can lead to
malfunction. Note that watches with shock-resistant designs (G-SHOCK, BABY-G,
G-MS) can be worn while operating a chain saw or engaging in other activities
that generate strong vibration, or while engaging in strenuous sports
activities (motocross, etc.)
Magnetism
Though a digital watch normally is not affected by magnetism, very strong
magnetism (from medical equipment, etc.) should be avoided because it can
cause malfunction and damage to electronic components.
Electrostatic Charge
Exposure to very strong electrostatic charge can cause your watch to display
the wrong time. Very strong electrostatic charge even can damage electronic
components.
Electrostatic charge can cause the display to go blank momentarily or cause a
rainbow effect on the display.
Chemicals
Do not allow your watch to come into contact with thinner, gasoline, solvents,
oils, or fats, or with any cleaners, adhesives, paints, medicines, or
cosmetics that contain such ingredients. Doing so can cause discoloration of
or damage to the resin case, resin band, leather, and other parts.
Storage
If you do not plan to use your watch for a long time, thoroughly wipe it free
of all dirt, sweat, and moisture, and store it in a cool, dry place.
Resin Components
Allowing your watch to remain in contact with other items or storing it
together with other items for long periods while it is wet can cause color on
resin components to transfer to the other items, or the color of the other
items to transfer to the resin components of your watch. Be sure to dry off
your watch thoroughly before storing it and make sure it is not in contact
with other items.
Leaving your watch where it is exposed to direct sunlight (ultraviolet rays)
for long periods or failure to clean dirt from your watch for long periods can
cause it to become discolored.
Friction caused by certain conditions (strong external force, sustained
rubbing, impact, etc.) can cause discoloration of painted components.
If there are printed figures on the band, strong rubbing of the printed area
can cause discoloration.
Leaving your watch wet for long periods can cause fluorescent color to fade.
Wipe the watch dry as soon as possible after it becomes wet.
Semi-transparent resin parts can become discolored due to sweat and dirt, and
if exposed to high temperatures and humidity for long periods.
Daily use and long-term storage of your watch can lead to deterioration,
breaking, or bending of resin components. The extent of such damage depends on
usage conditions and storage conditions.
Leather Band
Allowing your watch to remain in contact with other items or storing it
together with other items for long periods while it is wet can cause the color
of the leather band to transfer to the other items or the color of the other
items to transfer to the leather band. Be sure to dry off your watch
thoroughly with a soft cloth before storing it and make sure it is not in
contact with other items.
Leaving a leather band where it is exposed to direct sunlight (ultraviolet
rays) for long periods or failure to clean dirt from a leather band for long
periods can cause it to become discolored.
CAUTION: Exposing a leather band to rubbing or dirt can cause color transfer
and discoloration.
Metal Components
Failure to clean dirt from metal components can lead to formation of rust,
even if components are stainless steel or plated. If metal components exposed
to sweat or water, wipe thoroughly with a soft, absorbent cloth and then place
the watch in a well-ventilated location to dry.
Use a soft toothbrush or similar tool to scrub the metal with a weak solution
of water and a mild neutral detergent, or with soapy water. Next, rinse with
water to remove all remaining detergent and then wipe dry with a soft
absorbent cloth. When washing metal components, wrap the watch case with
kitchen plastic wrap so it does not come into contact with the detergent or
soap.
Bacteria and Odor Resistant Band
The bacteria and odor resistant band protects against odor generated by the
formation of bacteria from sweat, which ensures comfort and hygiene. In order
to ensure maximum bacteria and odor resistance, keep the band clean. Use an
absorbent soft cloth to thoroughly wipe the band clean of dirt, sweat, and
moisture. A bacteria and odor resistant band suppresses the formation of
organisms and bacteria. It does not protect against rash due to allergic
reaction, etc.
Liquid Crystal Display
Display figures may be difficult to read when viewed from an angle.
Note that CASIO Computer Co., Ltd. assumes no responsibility for any damage or
loss suffered by you or any third party arising through the use of your watch
or its malfunction.
3
Watch Operation Guide 3519
User Maintenance
Caring for Your Watch
Remember that you wear your watch next to your skin, just like a piece of
clothing. To ensure your watch performs at the level for which it is designed,
keep it clean by frequently wiping with a soft cloth to keep your watch and
band free of dirt, sweat, water and other foreign matter.
Whenever your watch is exposed to sea water or mud, rinse it off with clean
fresh water.
For a metal band or a resin band with metal parts, use a soft toothbrush or
similar tool to scrub the band with a weak solution of water and a mild
neutral detergent, or with soapy water. Next, rinse with water to remove all
remaining detergent and then wipe dry with a soft absorbent cloth. When
washing the band, wrap the watch case with kitchen plastic wrap so it does not
come into contact with the detergent or soap.
For a resin band, wash with water and then wipe dry with a soft cloth. Note
that sometimes a smudge like pattern may appear on the surface of a resin
band. This will not have any effect on your skin or clothing. Wipe with a
cloth to remove the smudge pattern.
Clean water and sweat from a leather band by wiping with a soft cloth.
Not operating a watch crown, buttons, or rotary bezel could lead to later
problems with their operation. Periodically rotate the crown and rotary bezel,
and press buttons to maintain proper operation.
Dangers of Poor Watch Care
Rust
Though the metal steel used for your watch is highly rust-resistant, rust can
form if your watch is not cleaned after it becomes dirty. Dirt on your watch
can make it impossible for oxygen to come into contact with the metal, which
can lead to breakdown of the oxidization layer on the metal surface and the
formation of rust.
Rust can cause sharp areas on metal components and can cause band pins to fly
out of position or to fall out. If you ever notice any abnormality immediately
stop using your watch and take it to your original retailer or to an
authorized CASIO service center.
Even if the surface of the metal appears clean, sweat and rust in crevasses
can soil the sleeves of clothing, cause skin irritation, and even interfere
with watch performance.
Premature Wear
Leaving sweat or water on a resin band or bezel, or storing your watch an area
subject to high moisture can lead to premature wear, cuts, and breaks.
Skin Irritation
Individuals with sensitive skin or in poor physical condition may experience
skin irritation when wearing a watch. Such individuals should keep their
leather band or resin band particularly clean. Should you ever experience a
rash or other skin irritation, immediately remove your watch and contact a
skin care professional.
Battery Replacement
Leave battery replacement up to your original retailer or authorized CASIO
service center.
Have the battery replaced only with the type specified in the
“Specifications”. Use of a different battery type can cause malfunction.
When replacing the battery, also request a check for proper water resistance.
Ornamental resin components may become worn, cracked, or bent over time when
subjected to normal daily use. Note that if cracking or any other abnormality
indicating possible damage is noticed in a watch submitted for battery
replacement, your watch will be returned with an explanation of the
abnormality, without the requested servicing being performed.
Initial Battery
The battery that comes loaded in your watch when you purchase it is used for
function and performance testing at the factory.
The test battery may go dead quicker than the normally rated battery life
noted in the “Specifications”. Note that you will be charged for replacement
of this battery, even if replacement is required within your watch’s warranty
period.
Low Battery Power
Low battery power is indicated by large timekeeping error, by dim display
contents, or by a blank display.
Operation while battery power is low can result in malfunction. Replace the
battery as soon as possible.
4
Watch Operation Guide 3519
Mobile Link Precautions
Legal Precautions
This watch complies with or has received approval under the radio laws of
various countries and geographical areas. Using this watch in an area where it
does not comply with or has not received approval under applicable radio laws
may be a criminal offense. For details, visit the CASIO Website.
https://world.casio.com/ce/BLE/
Use of this watch inside of aircraft is restricted under the aviation laws of
each country. Be sure to follow the instructions of airline personnel.
Precautions when using Mobile Link
When using this watch in combination with a phone, keep the watch and phone
close to each other. A range of two meters is recommended as a guideline, but
the local environment (walls, furniture, etc.), the structure of a building,
and other factors may require a much closer range.
This watch can be affected by other devices (electrical devices, audio-visual
equipment, office equipment, etc.) In particular, it can be affected by
operation of a microwave oven. The watch may not be able to communicate
normally with a phone if a microwave oven is operating nearby. Conversely,
this watch may cause noise in radio reception and the video image of a TV.
Bluetooth of this watch uses the same frequency band (2.4 GHz) as wireless LAN
devices, and use of such devices in close proximity of this watch may result
in radio interference, slower communication speeds and noise for the watch and
the wireless LAN device, or even communication failure.
Stopping Radio Wave Emission by This Watch
The watch is emitting radio waves whenever e is flashing or displayed. In
addition, the watch also connects phone automatically four times a day to
adjust its time setting.
When in a hospital, on an aircraft, or in any other area where the use of
radio waves is not allowed, use the operation below to stop radio wave
generation.
Stopping Radio Wave Generation Press any button to terminate the Bluetooth
connection.
Connected
Disconnected
Disabling Auto Time Adjustment Configure CASIO WATCHES settings to disable time adjustment between the watch and phone. l Using the Watch in a Medical Facility or Aircraft
5
Watch Operation Guide 3519
Before Getting Started…
This section provides an overview of the watch and introduces convenient ways
it can be used.
Watch Features Phone Linking
The watch supports connection and communication with a Bluetooth capable
phone. World Time The current time can be displayed for any one of 38 cities
around the globe, and for UTC (Coordinated Universal Time). Alarm An alarm
sounds whenever a time specified by you is reached. Stopwatch The stopwatch
measures elapsed time in units of one second (1/100 second for the first hour)
up to 24 hours. Timer Countdown from a start time specified by you. An alarm
sounds when the countdown reaches zero.
Note
The illustrations included in this operation guide have been created to
facilitate explanation. An illustration may differ somewhat from the item it
represents.
General Guide
AMonth, day BHour, minute, second CDay of the week
A button Holding down this button for at least two seconds in any mode
displays the setting screen.
B button Press to turn on illumination.
C button Each press cycles between watch modes. In any mode, hold down this
button for at least one second to return to the Timekeeping Mode.
D button Pressing this button while any setting screen is displayed will
change the setting.
Indicators
ADisplayed while there is a Bluetooth connection between the watch and a
phone.
BDisplayed during p.m. times while 12-hour timekeeping is being used.
CDisplayed while an alarm is turned on.
DDisplayed while the hourly time signal is enabled.
EDisplayed after the watch successfully connected with a phone and adjusted
its time setting. The [RCVD] indicator will disappear in the cases below.
After you use watch operations to change Home City settings (time and date,
city, summer time) After the watch switches between standard time and summer
time After a phone-based time adjustment operation fails
FDisplayed in the Stopwatch Mode when the displayed time is a split time.
GDisplayed while the button operation tone is disabled.
HDisplayed while the watch is indicating summer time.
IDisplayed while Auto Light is enabled.
6
Watch Operation Guide 3519
Navigating Between Modes
Each press of (C) cycles between watch modes. In any mode, hold down (C) for
at least one
second to return to the Timekeeping Mode.
Timekeeping Mode
Selecting a Timekeeping Mode Digital Display Format
Each press of (A) in the Timekeeping Mode cycles the display information as
shown below.
Normal Timekeeping Display
App Info Screen
Viewing the Face in the Dark
The watch has a light that illuminates the face for viewing in the dark.
To illuminate the face manually Press (B) to turn on illumination.
Illumination will turn off automatically if an
alarm starts to sound.
$ Alarm Mode
$ World Time Mode
$ Timer Mode
$ Stopwatch Mode
$
Connecting with a Phone Hold down (C) for at least three seconds to connect with a phone. To disconnect, press any button.
Before connection
$
After connection
Any button
To return to normal timekeeping from the app info screen, press (C) or (D).
Important!
To receive CASIO WATCHES information, you need to turn on the app info receive
setting. l Receiving CASIO WATCHES Information On the Watch
App Info Screen The app info screen shows information
received when the watch connects with a phone to adjust its current time
setting. This screen shows CASIO WATCHES update and other information. When
CASIO WATCHES information is received while the watch is in the Timekeeping
Mode, the watch automatically switches to the app info screen. The app info
screen automatically returns to the normal timekeeping screen at midnight.
Important!
Frequent use of illumination runs down the battery.
Note
Display illumination is disabled when any one of the conditions below exists.
Alarm, timer alert, or other beeper sounding
To illuminate the face when Auto Light is enabled
If Auto Light is enabled, face illumination will turn on automatically
whenever the watch is positioned at an angle of 40 degrees or more.
40 degrees or more
7
Watch Operation Guide 3519
Important!
Auto Light may not operate properly when the watch is at a horizontal angle of
15 degrees or greater from horizontal as shown in the illustration below.
Electro-static charge or magnetism can interfere with proper auto light
operation. If this happens, try lowering your arm and then angle it towards
your face again.
When moving the watch you may note a slight rattling sound. This is due to
operation of the auto light switch, which determines the current orientation
of the watch. It does not indicate malfunction.
Specifying the Illumination Duration You can select either 1.5 seconds or
three seconds as the illumination duration.
1. Enter the Timekeeping Mode. l Navigating Between Modes
2. Hold down (A) for at least two seconds. Release the button when the name
of the currently selected Home City appears on the display.
Home City
Useful Features
Pairing the watch with your phone makes a number of the watch’s features
easier to use. Auto time adjustment l Auto Time Adjustment
12:30
3. Press (C) 12 times to display [LIGHT].
Selection of More Than 300 World Time cities l Configuring World Time Settings
Note
Auto Light is disabled when any one of the conditions below exists. Alarm,
timer alert, or other beeper sounding
Configuring the Auto Light Setting
1. Enter the Timekeeping Mode. l Navigating Between Modes
2. Hold down (B) for at least three seconds to toggle Auto Light between
enabled and disabled. [LT] is displayed while Auto Light is enabled.
4. Press (D) to select an illumination duration. [1]: 1.5-second illumination
[3]: 3-second illumination
5. Press (A) to exit the setting screen.
In addition, a number of other watch settings can be configured using your
phone.
To transfer data to a watch and to configure settings, you first need to pair
the watch with your phone. l Getting Ready
Your phone needs to have the CASIO “CASIO WATCHES” app installed to pair with
the watch.
On
Note
If you do not disable it manually, Auto Light remains enabled for
approximately six hours. After that, it becomes disabled automatically.
8
Watch Operation Guide 3519
Linking with a Phone
While there is a Bluetooth connection between the watch and phone (Mobile
Link), the watch’s current time setting is adjusted automatically. You can
also change the watch’s other settings.
Note
This function is available only while CASIO WATCHES is running on the phone.
This section describes watch and phone operations. X : Watch operation Y :
Phone operation
Getting Ready
To use your watch in combination with a phone, you first need to pair them.
Perform the steps below to pair the watch with a phone.
A Install the app on your phone. In Google Play or the App Store, search for
the “CASIO WATCHES” phone app and install it on your phone.
B Configure Bluetooth settings. Enable the phone’s Bluetooth.
Note
For details about setting procedures, see your phone documentation.
C Pair the watch with a phone.
Before you can use the watch in combination with a phone, you first need to
pair them.
1. Move the phone to be paired with close to (within one meter of) the watch.
2. Y Tap the “CASIO WATCHES” icon.
Tap on the “My Watch” tab. Next, select the applicable product name.
3. X Hold down (C) for at least three seconds. Release the button when e and
[CNCT] start to flash.
4. Y Perform the operation shown on the screen of the phone to be paired
with. When a connection is established between the watch and phone, e and
[CNCT] will stop flashing and remain on the display. If pairing fails for some
reason, [ERR] will appear on the display momentarily and then the watch will
return to the Timekeeping Mode. Perform the pairing procedure again from the
beginning.
Pairing started.
Pairing complete.
Note
The first time you start up CASIO WATCHES phone app, a message will appear on
your phone asking if you want to enable location information acquisition.
Configure settings to allow background use of location information.
Auto Time Adjustment
Your watch will connect with a phone at preset times each day and adjust its
time settings automatically. Using This Function Your watch adjusts its time
setting four times a day according to a preset schedule. If you leave your
watch in the Timekeeping Mode, it will perform the adjustment operation
automatically as you go about your daily life, without any operation required
by you.
12:30
Important!
The watch may not be able to perform auto time adjustment under the conditions
described below. While the watch is too far away from its paired phone While
communication is not possible due to radio interference, etc. While the phone
is updating its system While the CASIO WATCHES phone app is not running on the
phone
Note
If there is a World Time City specified with the CASIO WATCHES phone app, its
time will also be adjusted automatically.
The watch will connect with the phone and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The connection is
automatically terminated after auto time adjustment is complete.
9
Watch Operation Guide 3519
Triggering Immediate Time Adjustment
The watch’s time setting will be adjusted automatically whenever you establish
a connection between the watch and a phone. Whenever you want to trigger
immediate time adjustment, perform the procedure below to connect with a
phone.
1. X Enter the Timekeeping Mode. l Navigating Between Modes
2. Move the phone close to (within one meter of) the watch.
3. X Press (D).
[TIME] flashes to indicate that the watch has started the connection operation. Once the watch and phone are connected, [OK] will appear, and then the watch will adjust its time setting based on information from the phone.
At this time your current location is recorded by your phone.
Trying to connect
After time adjustment
Note
The connection is terminated automatically after time adjustment is complete.
If time adjustment fails for some reason, [ERR] will appear.
[RCVD] flashes when the receive operation starts, and [RCVD] stops flashing
after it is complete.
Receiving CASIO WATCHES Information On the Watch
You can configure settings so the watch receives CASIO WATCHES update and other information whenever it connects with a phone to adjust its current time setting.
1. Y Tap the “CASIO WATCHES” icon.
2. X Hold down (C) for at least three seconds. Release the button when e and
[CNCT] start to flash.
When a connection is established between the watch and phone, e and [CNCT]
will stop flashing and remain on the display.
If connection fails for some reason, [ERR] will appear on the display
momentarily and then the watch will return to the Timekeeping Mode.
Trying to connect
Connected
3. Y Perform the operation shown on your phone screen to enable app info
receive.
Note
If app info receive is turned on, the watch receives CASIO WATCHES information
as described below. Each time the watch automatically adjusts its time setting
(four times a day) When you press (D) in the Timekeeping Mode to adjust the
watch time setting When you hold down (C) for at least three seconds to
connect the watch with a phone.
When CASIO WATCHES information is received while the watch is in the
Timekeeping Mode, the watch automatically switches to the app info screen.
Configuring World Time Settings
Specifying a World Time City with the CASIO WATCHES phone app causes the
watch’s World Time City to change accordingly. Settings can be configured to
perform auto summer time switching for the World Time City.
Note
The CASIO WATCHES phone app World Time lets you select from among
approximately 300 cities as the World Time City.
You can use the CASIO WATCHES phone app to configure settings for user cities
that are not included in the watch’s built-in World Time Cities. You must use
the CASIO WATCHES phone app to select a user city as your World Time City.
To select a World Time City
1. Y Tap the “CASIO WATCHES” icon.
2. X Hold down (C) for at least three seconds. Release the button when e and
[CNCT] start to flash.
When a connection is established between the watch and phone, e and [CNCT]
will stop flashing and remain on the display.
If connection fails for some reason, [ERR] will appear on the display
momentarily and then the watch will return to the Timekeeping Mode.
Trying to connect
Connected
3. Y Perform the operation shown on the phone screen. The World Time setting
will be reflected on the watch.
10
Watch Operation Guide 3519
Configuring the Summer Time Setting
1. Y Tap the “CASIO WATCHES” icon.
2. X Hold down (C) for at least three seconds. Release the button when e and
[CNCT] start to flash.
When a connection is established between the watch and phone, e and [CNCT]
will stop flashing and remain on the display.
If connection fails for some reason, [ERR] will appear on the display
momentarily and then the watch will return to the Timekeeping Mode.
Trying to connect
Connected
Swapping Your World Time and Home Time
1. Y Tap the “CASIO WATCHES” icon.
2. X Hold down (C) for at least three seconds. Release the button when e and
[CNCT] start to flash.
When a connection is established between the watch and phone, e and [CNCT]
will stop flashing and remain on the display.
If connection fails for some reason, [ERR] will appear on the display
momentarily and then the watch will return to the Timekeeping Mode.
Trying to connect
Connected
Phone Finder
You can use phone finder to trigger a tone on the phone to make it easy to
find. The tone is forced to sound even if the phone is in vibrate mode.
Important!
Do not use this function in areas where phone call tones are restricted.
The tone sounds at a high volume. Do not use this function when listening to
phone output over earphones.
1. X If the watch is connected with a phone, press any button to terminate the connection.
Connected
Disconnected
3. Y Perform the operation shown on the phone screen to select a summer time
setting.
“Auto” The watch switches between standard time and summer time automatically.
“OFF” The watch always indicates standard time.
“ON” The watch always indicates summer time.
Note
While the summer time setting is “Auto”, the watch will switch between
standard time and summer time automatically. You do not need to switch between
standard time and summer time manually. Even if you are in an area that does
not observe summer time, you can leave the watch’s summer time setting as
“Auto”.
Changing the time setting manually with a watch operation will cancel auto
standard time/summer time switching.
For information about summer time periods, refer to the “Summer Time Table” or
CASIO WATCHES.
3. Y Perform the operation shown on the phone screen to swap your Home Time
with your World Time.
Note
Auto time adjustment does not work for 24 hours after swapping of the Home
Time and World Time.
2. X If the watch is in any mode besides the Timekeeping Mode, hold down (C)
for at least one second to enter the Timekeeping Mode.
3. X Hold down (D) for at least three seconds. Release the button when e and
[FIND] start to flash.
The phone will sound a tone when it establishes a connection with the watch.
It will take a few seconds before the phone tone sounds.
Getting ready to connect with phone
Sounding phone alert sound
4. X Press any button to stop the tone.
You can press any watch button to stop the phone tone only during the first 30
seconds after it starts to sound.
11
Watch Operation Guide 3519
Configuring Watch Settings
Alarm time, timer start time, and other settings can also be configured using CASIO WATCHES.
1. Y Tap the “CASIO WATCHES” icon.
2. X Hold down (C) for at least three seconds. Release the button when e and
[CNCT] start to flash.
When a connection is established between the watch and phone, e and [CNCT]
will stop flashing and remain on the display.
If connection fails for some reason, [ERR] will appear on the display
momentarily and then the watch will return to the Timekeeping Mode.
Trying to connect
Connected
3. Y Select the setting you want to change and then perform the operation shown on the phone screen.
Changing the Home City Summer Time Setting
1. Y Tap the “CASIO WATCHES” icon.
2. X Hold down (C) for at least three seconds. Release the button when e and
[CNCT] start to flash.
When a connection is established between the watch and phone, e and [CNCT]
will stop flashing and remain on the display.
If connection fails for some reason, [ERR] will appear on the display
momentarily and then the watch will return to the Timekeeping Mode.
Trying to connect
Connected
Recording Your Current Location (TIME & PLACE)
While traveling or otherwise on the go, you can use the procedure below to
record your current location, along with the time and date, on your phone.
Recorded location information can be viewed on a CASIO WATCHES map while the
watch is connected with your phone.
Recording Your Current Location
1. X Enter the Timekeeping Mode. l Navigating Between Modes
2. X When you are in the location you want to record, press (D). This
records, in phone memory, the latitude and longitude of the location you are
in when you press the button, along with the date and time. [OK] appears when
registration is complete. [ERR] appears when registration fails. At this time
the time settings of your phone and watch will be synced with each other.
Viewing a Recorded Location on a Map
1. Y Tap the “CASIO WATCHES” icon.
2. Y Perform the operation shown on the phone screen to view recorded
location information.
Note
You can use CASIO WATCHES to delete recorded location information.
Connection
Connecting with a Phone
Your watch can connect with a phone that is paired with it. If the watch is
not paired with the phone you
want to connect with, refer to the information below and pair them. l C Pair
the watch with a phone.
Connecting with a Phone
1. Move the phone close to (within one meter of) the watch.
2. X Hold down (C) for at least three seconds. Release the button when e and
[CNCT] start to flash.
When a connection is established between the watch and phone, e and [CNCT]
will stop flashing and remain on the display.
If connection fails for some reason, [ERR] will appear on the display
momentarily and then the watch will return to the Timekeeping Mode.
Trying to connect
Connected
3. Y Perform the operation shown on the phone screen to change your Home City summer time setting.
12
Watch Operation Guide 3519
Important!
If you have problems establishing a connection, it could mean that CASIO
WATCHES is not running on your phone. On your phone’s home screen, tap the
“CASIO WATCHES” icon. After the app starts up, hold down the watch’s (C)
button for at least three seconds.
Note
The connection will be terminated if you do not perform any operation on the
watch or phone for a fixed amount of time. To specify the connection limit
time, perform the following operation with CASIO WATCHES: “Watch settings” n
“Connection time with the app”. Next, select a setting of 3 minutes, 5
minutes, or 10 minutes.
Disconnecting from Your Phone
Pressing any button will terminate a Bluetooth connection and return to the
Timekeeping Mode.
Connected
Disconnected
Deleting Pairing Information from the Watch
1. X Hold down (C) for at least one second to enter the Timekeeping Mode.
2. X Hold down (A) for at least two seconds. Release the button when the name
of the currently selected Home City appears on the display.
Home City
3. X Press (C) twice. This causes the seconds to flash.
Seconds
4. X Hold down (B) for at least two seconds. This will cause [PAIR] and [CLR]
to alternate on the display. Release the button when only [CLR] is displayed.
This deletes the pairing information from the watch and returns to the
timekeeping display.
Time Adjustment
Your watch can connect with a phone to obtain information that it uses to
adjust its date and time setting.
Important!
When you are on an aircraft or in any other location where radio signals may
cause problems, enable the watch’s Airplane Mode to disable connection with
your phone. l Using the Watch in a Medical Facility or Aircraft
Referring to the information below, configure the time setting in accordance
with the method that suits your own lifestyle.
Do you use a phone? Time adjustment by connecting with your phone is
recommended. l Auto Time Adjustment
12:30
Unpairing Unpairing the watch from a phone requires both CASIO WATCHES phone
app and watch operations.
Deleting Pairing Information from the CASIO WATCHES phone app
1. Y Tap the “CASIO WATCHES” icon.
2. Y Perform the operation shown on the phone screen to unpair.
5. X Press (A) to return to the Timekeeping Mode.
If you purchase another phone
You need to perform the pairing operation whenever you want to establish a
Bluetooth connection with a phone for the first time. l Deleting Pairing
Information from the
Watch l C Pair the watch with a phone.
If your phone cannot connect with the watch
You can adjust time settings by performing operations on the watch. l Using
Watch Operations to Adjust the
Time Setting
13
Watch Operation Guide 3519
Using Watch Operations to Adjust the Time Setting
If your watch cannot connect with your phone for some reason, you can use
watch operations to adjust date and time settings. Setting a Home City Use the
procedure in this section to select a city to use as your Home City. If you
are in an area that observes summer time, you can also configure a summer time
setting.
Note
The initial factory default summer time setting for all cities is [AUTO]. In
many cases, the [AUTO] setting lets you use the watch without switching
between summer time and standard time.
1. Enter the Timekeeping Mode. l Navigating Between Modes
2. Hold down (A) for at least two seconds. Release the button when the name
of the currently selected Home City appears on the display.
Home City
3. Use (B) and (D) to change the Home City setting. Holding down (B) or (D)
scrolls through settings at high speed. For details refer to the information
below. l City Table
4. Press (C).
5. Use (D) to select a summer time setting. Each press of (D) cycles through
available settings in the sequence shown below. [AUTO] The watch switches
between standard time and summer time automatically. [OFF] The watch always
indicates standard time. [ON] The watch always indicates summer time.
6. Press (A) to complete the setting operation.
Note
While the setting is being configured, the watch will exit the setting
operation automatically after about two or three minutes of non-operation.
Setting the Time/Date
1. Enter the Timekeeping Mode. l Navigating Between Modes
2. Hold down (A) for at least two seconds. Release the button when the name
of the currently selected Home City appears on the display.
Home City
3. Keep pressing (C) until the setting you want to change is flashing. Each
press of (C) moves the flashing to the next setting in the sequence shown
below.
Home City
Summer time
Seconds
Hours
Minutes
Year
Month
Day
12/24-hour timekeeping
Date display format
Day of the week language
Operation tone enable/disable
Illumination duration
Auto adjust
14
Watch Operation Guide 3519
4. Configure the date and time settings. To reset the seconds to 00: Press
(D). 1 is added to the minutes when the current count is between 30 and 59
seconds. For all the other settings, use (B) and (D) to change the flashing
setting. Holding down (B) or (D) scrolls through settings at high speed.
5. Repeat steps 3 and 4 to select time and date settings.
6. Press (A) to complete the setting operation.
Note
While the setting is being configured, the watch will exit the setting
operation automatically after about two or three minutes of non-operation.
Switching between 12-hour and 24hour Timekeeping
You can specify either 12-hour format or 24hour format for the time display.
1. Enter the Timekeeping Mode. l Navigating Between Modes
2. Hold down (A) for at least two seconds. Release the button when the name
of the currently selected Home City appears on the display.
Home City
3. Press (C) eight times.
This causes [12H] or [24H] to flash on the display.
4. Press (D) to toggle the setting between [12H] (12-hour timekeeping) and [24H] (24-hour timekeeping).
12-hour timekeeping
24-hour timekeeping
5. Press (A) to complete the setting operation.
Note
While the setting is being configured, the watch will exit the setting
operation automatically after about two or three minutes of non-operation.
Using the Watch in a Medical Facility or Aircraft
Whenever you are in a hospital, on an aircraft, or in any other location where
connection with a phone may cause problems, you can perform the procedure
below to disable auto time adjustment. To re-enable auto time adjustment,
perform the same operation again. 1. Enter the Timekeeping Mode.
l Navigating Between Modes 2. Hold down (A) for at least two seconds.
Release the button when the name of the currently selected Home City appears
on the display.
Home City
3. Press (C) 13 times. This displays [RCVD].
4. Press (D) to toggle between the auto time adjustment settings. [OFF]: Auto
time adjustment disabled. [On]: Enable auto time adjustment.
5. Press (A) to complete the setting operation.
Note
The auto time adjustment setting can be changed only while the watch is paired
with a phone.
15
Watch Operation Guide 3519
World Time
You can view the current time in 38 cities (38 time zones), and UTC
(Coordinated Universal Time).
Using CASIO WATCHES to Configure World Time City Settings
If the watch is paired with a phone, you can also use CASIO WATCHES to set the
World Time city. l Configuring World Time Settings
Note World Time cities that can be selected
only by using CASIO WATCHES cannot be selected using watch operations.
Checking World Time
1. Enter the World Time Mode. l Navigating Between Modes This displays the
current World Time City and the current time there.
World Time
Pressing (A) displays the World Time City again.
To change the selected World Time city, press (D).
World Time City Setting
Use the procedure in this section to select a World Time city. If you are in
an area that observes summer time, you can also configure a summer time
setting.
Note
The initial factory default summer time setting for all cities is [AUTO]. In
many cases, the [AUTO] setting lets you use the watch without switching
between summer time and standard time.
1. Enter the World Time Mode. l Navigating Between Modes
2. Use (D) to display the city you want. Holding down (D) scrolls through
settings at high speed.
3. To change the summer time setting, hold down (A) for about two seconds.
4. Use (D) to select a summer time setting. [AUTO] The watch switches between
standard time and summer time automatically. [OFF] The watch always indicates
standard time. [ON] The watch always indicates summer time.
5. Press (A) to complete the setting operation.
Note
While the setting is being configured, the watch will exit the setting
operation automatically after about two or three minutes of non-operation.
While [UTC] is selected as the city, you will not be able to change or check
the summer time setting.
If you select a World Time City with the CASIO WATCHES phone app and then
change to a different city with a watch operation, the CASIO WATCHES city
information is deleted from the watch. l Configuring World Time Settings
Swapping Your Home Time and World Time
In the World Time mode, press (A) and (B) at the same time to swap your Home
City time with your World Time.
Before swapping World Time
After swapping Home Time
Home Time
World Time
Note
This function comes in handy when you need to move to another time zone. For
details about how to use it, go to the section below. l Moving to Another Time
Zone
16
Watch Operation Guide 3519
Alarm
The watch will beep when an alarm time is reached. You can set up to five
different alarms. The hourly time signal causes the watch to beep every hour
on the hour. An alarm will not sound if the battery is low.
4. Use (B) and (D) to change the hour setting.
Holding down (B) or (D) scrolls through settings at high speed.
If you are using 12-hour timekeeping, [P] indicates p.m.
Enabling the Hourly Time Signal
1. Enter the Alarm Mode. l Navigating Between Modes
2. Use (D) to display the hourly time signal screen ([SIG]).
Using CASIO WATCHES to Configure Alarm Settings
If the watch is paired with a phone, you can also use CASIO WATCHES to set
alarms. l Configuring Watch Settings
Configuring Alarm Settings
1. Enter the Alarm Mode. l Navigating Between Modes
2. Press (D) to scroll through alarm numbers ([AL1] to [AL5]) until the alarm
you want to configure is displayed.
Alarm number
Alarm time
3. Hold down (A) for at least two seconds. Release the button when the hours
digits start to flash. While the setting is being configured, the watch will
exit the setting operation automatically after about two or three minutes of
non-operation.
5. Press (C). This causes the minutes digits to flash.
Alarm minute
6. Use (B) and (D) to set the minute setting. 7. Press (A) to exit the
setting screen.
[ALM] (alarm) is shown on the display while an alarm is turned on.
Note A beeper sounds for 10 seconds when
an alarm time is reached. The watch will automatically return
from the Alarm Mode to the Timekeeping Mode if you do not perform any
operation for about two or three minutes.
Testing the alarm In the Alarm Mode, hold down (D) to sound the alarm. To stop
the alarm Pressing any button while the beeper is sounding stops it.
3. Press (A) to toggle the hourly time signal between enabled and disabled.
[SIG] is shown on the display while the hourly time signal is turned on.
Turning Off an Alarm or the Hourly Time Signal
To stop an alarm or the hourly time signal from sounding, perform the steps
below to turn it off. To have an alarm or hourly time signal
sound again, turn it back on. Note Indicators are displayed while any of
the alarms or the hourly time signal is turned on. The applicable indicators
are not displayed while all of the alarms are turned off and/or the hourly
time signal is turned off.
Alarm
Hourly time signal
Alarm hour
17
Watch Operation Guide 3519
1. Enter the Alarm Mode. l Navigating Between Modes
2. Use (D) to scroll through the alarm ([AL1] to [AL5]) and hourly time
signal ([SIG]) screens until the one you want to turn off is displayed.
Alarm number or hourly time signal
Moving to Another Time Zone
Use the procedure below to easily change day and time settings of the watch to
a destination location.
Before Boarding
1. Configure the World Time to the current time at your destination.
Stopwatch
The stopwatch measures elapsed time in 1/100-second units for the first hour,
and in 1second units after that for up to 23 hours 59 minutes 59 seconds (24
hours).
3. Press (A) to turn off the displayed alarm or the hourly time signal. Each
press of (A) toggles between on and off. Turning off all alarms causes [ALM]
(alarm) to disappear from the display. Turning off the hourly time signal
causes [SIG] (hourly time signal) to disappear.
Note
If [ALM] (alarm) is still displayed after you turn off an alarm, it means that
at least one of the other alarms is still turned on. To turn off all of the
alarms, repeat steps 2 and 3 until the [ALM] (alarm) indicator is no longer
displayed.
Destination time
Current time
l Using CASIO WATCHES to Configure Settings
l Using Watch Operations to Configure Settings
2. Disable auto time adjustment.
l Using the Watch in a Medical Facility or Aircraft
After Arriving
1. Swap the origin time zone time with the destination time zone time.
Before swapping Destination time
After swapping
Measuring Elapsed Time
1. Enter the Stopwatch Mode. l Navigating Between Modes
2. Use the operations below to measure elapsed time.
Start
Stop
Resume
Stop
Elapsed time is shown in 1/100-second units for the first hour of the measurement. After the first hour, elapsed time is shown in one-second units.
First hour
After first hour Hour, minute, second
Destination time
l Using CASIO WATCHES to Configure Settings
l Using Watch Operations to Configure Settings
2. Enable auto time adjustment. l Using the Watch in a Medical Facility or
Aircraft
3. Adjust the time setting. l Triggering Immediate Time Adjustment
Minutes, seconds, 1/100 seconds
3. Press (A) to reset the measurement time to all zeros.
18
Watch Operation Guide 3519
Measuring a Split Time
1. Enter the Stopwatch Mode. l Navigating Between Modes
2. Use the operations below to measure elapsed time.
Pressing (A) displays the elapsed time from the start of a race up to the
point when you pressed the button (split time).
D Start
A Split
A Split release
D Stop
Elapsed time is shown in 1/100-second units for the first hour of the measurement. After the first hour, elapsed time is shown in one-second units.
First hour
After first hour Hour, minute, second
Timing the First and Second Place Finishers
1. Enter the Stopwatch Mode. l Navigating Between Modes
2. Use the operations below to measure elapsed time.
D Start
A 1st Finisher*
D 2nd Finisher*
- This displays the time of the first finisher.
Elapsed time is shown in 1/100-second units for the first hour of the measurement. After the first hour, elapsed time is shown in one-second units.
First hour
After first hour Hour, minute, second
Timer
The timer counts down from a start time specified by you. A beeper sounds when
the end of the countdown is reached. The beeper will not sound if the battery
is
low.
Using CASIO WATCHES to Configure Timer Settings
If the watch is paired with a phone, you can also use the CASIO WATCHES phone
app to set the timer start time. l Configuring Watch Settings
Minutes, seconds, 1/100 seconds
3. Press (A) to reset the measurement time to all zeros.
Minutes, seconds, 1/100 seconds
3. Press (A) to display the time of the second finisher.
4. Press (A) to reset the measurement time to all zeros.
Setting the Countdown Start Time
The countdown start time can be set in 1second units up to 24 hours. If a
timer countdown operation is in
progress, reset the timer to its current start time before performing this
operation. l Using the Timer
1. Enter the Timer Mode. l Navigating Between Modes
2. Hold down (A) for at least two seconds. This causes the hours digits to
flash.
Hours
3. Use (B) and (D) to change the timer hours setting. Holding down (B) or (D)
scrolls through settings at high speed.
19
Watch Operation Guide 3519
4. Press (C). This causes the minutes digits to flash.
Using the Timer
1. Enter the Timer Mode. l Navigating Between Modes
Other Settings
This section explains other watch settings you can configure.
Minutes
5. Use (B) and (D) to change the timer minutes setting.
6. Press (C). This causes the seconds digits to flash.
Seconds
7. Use (B) and (D) to change the seconds setting.
8. Press (A) to exit the setting screen. Note
While the setting is being configured, the watch will exit the setting
operation automatically after about two or three minutes of non-operation.
Setting a start time of [0:00 00] will perform a countdown of 24 hours.
Hour, minute, second
2. Use the operations below to perform a timer operation.
D Start
(Countdown starts)
D Pause
D Resume
(Time up)
A beeper will sound for 10 seconds to let you know when the end of a countdown
is reached.
You can reset a paused countdown to its start time, by pressing (A).
3. Press any button to stop the tone.
Changing the Date Display Format
1. Enter the Timekeeping Mode. l Navigating Between Modes
2. Hold down (A) for at least two seconds. Release the button when the name
of the currently selected Home City appears on the display.
Home City
3. Press (C) nine times. This displays a screen for selecting the date
display format.
4. Press (D) to select a date display format. [M.DD]: Month, day [DD.M]: Day,
month
5. Press (A) to exit the setting screen.
Note
While the setting is being configured, the watch will exit the setting
operation automatically after about two or three minutes of non-operation.
20
Watch Operation Guide 3519
Specifying the Day of the Week Language
You can select any one of six languages for the day of the week display in the
Timekeeping Mode.
1. Enter the Timekeeping Mode. l Navigating Between Modes
2. Hold down (A) for at least two seconds. Release the button when the name
of the currently selected Home City appears on the display.
Home City
Enabling the Button Operation Tone
Use the procedure below to enable or disable the tone that sounds when you
press a button.
1. Enter the Timekeeping Mode. l Navigating Between Modes
2. Hold down (A) for at least two seconds. Release the button when the name
of the currently selected Home City appears on the display.
Home City
Resetting Watch Settings
This section explains how to return the watch settings below to their initial
factory defaults. Watch Settings Stopwatch Timer Alarm
1. Enter the Timekeeping Mode. l Navigating Between Modes
2. Hold down (A) for at least two seconds. Release the button when the name
of the currently selected Home City appears on the display.
Home City
3. Press (C) 10 times. This causes the language setting to flash.
3. Press (C) 11 times.
This causes [KEY] or [MUTE] to flash on the display.
3. Press (C) twice. This causes the seconds to flash.
4. Use (D) to select a language. [ENG]: English [ESP]: Spanish [FRA]: French
5. Press (A) to exit the setting screen.
Note
While the setting is being configured, the watch will exit the setting
operation automatically after about two or three minutes of non-operation.
4. Press (D) to select [KEY] or [MUTE]. [KEY]: Operation tone enabled.
[MUTE]: Operation tone muted.
5. Press (A) to exit the setting screen. Note While the setting is being
configured, the watch will exit the setting operation automatically after
about two or three minutes of non-operation. Note that alarm and timer tones
will still sound even while the operation tone is muted.
Seconds
4. Hold down (B) for at least six seconds. Release the button when [ALL]
stops flashing.
Note While the setting is being configured,
the watch will exit the setting operation automatically after about two or
three minutes of non-operation. Resetting the watch will also delete
information for pairing the watch with a phone, and unpair them.
21
Watch Operation Guide 3519
Other Information
This section provides non-operational information you also need to know. Refer
to this information as required.
City Table
City
Offset
UTC
Coordinated Universal Time
0
LON: LONDON
London
0
PAR: PARIS
Paris
+1
ATH: ATHENS
Athens
+2
JED: JEDDAH
Jeddah
+3
THR: TEHRAN
Tehran
+3.5
DXB: DUBAI
Dubai
+4
KBL: KABUL
Kabul
+4.5
KHI: KARACHI
Karachi
+5
DEL: DELHI
Delhi
+5.5
KTM: KATHMANDU
Kathmandu
+5.75
DAC: DHAKA
Dhaka
+6
RGN: YANGON
Yangon
+6.5
BKK: BANGKOK
Bangkok
+7
HKG: HONG KONG
Hong Kong
+8
EUC: EUCLA
Eucla
+8.75
TYO: TOKYO
Tokyo
+9
ADL: ADELAIDE
Adelaide
+9.5
SYD: SYDNEY
Sydney
+10
LDH: LORD HOWE ISLAND
Lord Howe Island
+10.5
NOU: NOUMEA
Noumea
+11
WLG: WELLINGTON
Wellington
+12
CHT: CHATHAM ISLAND
Chatham Islands
+12.75
City
TBU: NUKUALOFA
Nuku’alofa
CXI: KIRITIMATI
Kiritimati
BAR: BAKER ISLAND
Baker Island
PPG: PAGO PAGO
Pago Pago
HNL: HONOLULU
Honolulu
NHV: MARQUESAS ISLANDS
Marquesas Islands
ANC: ANCHORAGE
Anchorage
LAX: LOS ANGELES
Los Angeles
DEN: DENVER
Denver
CHI: CHICAGO
Chicago
NYC: NEW YORK
New York
YHZ: HALIFAX
Halifax
YYT: ST. JOHN’S
St. John’s
RIO: RIO DE
JANEIRO
Rio
de
Janeiro
FEN:
Fernando de
F. DE NORONHA Noronha
RAI: PRAIA
Praia
Offset +13 +14 -12 -11 -10
-9.5
-9 -8 -7 -6 -5 -4 -3.5 -3 -2 -1
The information in the above table is current as of July 2022.
Time zones may change and UTC differentials may become different from those shown in the table above. If this happens, connect the watch with a phone to update the watch with the latest time zone information.
Summer Time Table
When [AUTO] is selected for a city that observes summer time, switching
between standard time and summer time will be performed automatically at the
timing shown in the table below.
Note
Summer time start and end dates for your current location may be different
from those shown below. If this happens, you can have new summer time
information for your Home City and World Time City sent to the watch by
connecting the watch with a phone. If the watch is not connected with a phone,
you can change the summer time setting manually.
22
Watch Operation Guide 3519
City Name
Summer Time Start
Summer Time End
London
01:00, last Sunday in March
02:00, last Sunday in October
Paris
02:00, last Sunday in March
03:00, last Sunday in October
Athens
03:00, last Sunday in March
04:00, last Sunday in October
Tehran
00:00, March 22 or 21
00:00, September 22 or 21
Sydney, Adelaide
02:00, first Sunday in October
03:00, first Sunday in April
Lord Howe Island
02:00, first Sunday in October
02:00, first Sunday in April
02:00, last Wellington Sunday in
September
03:00, first Sunday in April
Chatham Islands
02:45, last Sunday in September
03:45, first Sunday in April
Anchorage
02:00, second Sunday in March
02:00, first Sunday in November
Los Angeles
02:00, second Sunday in March
02:00, first Sunday in November
Denver
02:00, second Sunday in March
02:00, first Sunday in November
Chicago
02:00, second Sunday in March
02:00, first Sunday in November
New York
02:00, second Sunday in March
02:00, first Sunday in November
Halifax
02:00, second Sunday in March
02:00, first Sunday in November
St. John’s
02:00, second Sunday in March
02:00, first Sunday in November
The information in the above table is current as of July 2022.
Specifications
Accuracy at normal temperature : ±15 seconds per month average when time
adjustment by communication with a phone is not possible.
Timekeeping : Hour, minute, second, month, day, day of the week
a.m./p.m.(P)/24-hour timekeeping Full Auto Calendar (2000 to 2099) Summer Time
World Time : 38 cities (38 time zones) and Coordinated Universal Time (UTC)
Summer time Home Time swapping
Stopwatch : Measurement unit: 1/100 seconds (first hour); 1 second (after
first hour) Measuring range: 23 hours 59 minutes 59 seconds Measurement
Functions: Elapsed time, split times, 1st and 2nd place finisher times
Timer : Measuring unit: 1 second Countdown range: 24 hours Time setting unit:
1 second Time setting range: 1 second to 24 hours 10-second beeper when the
end of the countdown is reached
Alarm : Time alarm Number of alarms: 5 Setting units: Hours, minutes Alarm
tone duration: 10 seconds Hourly time signal: Beep every hour on the hour
Mobile Link : Auto Time Adjustment Time setting adjusted automatically at
preset time One-touch Time Correction Manual connection and time adjustment
Phone finder Watch operation sounds the alert sound of the mobile phone World
Time Current time for approximately 300 cities selected for the watch Home
Time/World Time swapping Auto Summer Time Switching Automatic switching
between standard time and summer time Timer Settings Alarm Settings App Info
Receive Displays new information from the app on the watch Data Communication
Specifications Bluetooth® Frequency Band: 2400MHz to 2480MHz Maximum
Transmission: 0 dBm (1 mW) Communication range: Up to 2 meters (depends on
environment)
Other : LED backlight (Super Illuminator, afterglow with selectable 1.5 or
3-second duration), Auto light, selectable date format, selectable day of the
week language, auto time adjustment enable/disable, operation tone
enable/disable
Power Supply : CR2016 x 1 Battery life: Approximately 3 years Conditions: Auto
time adjust by phone: 4 times/day Alarm: Once (10 seconds)/day Illumination:
Once (1.5 seconds)/day
Specifications are subject to change without notice.
Supported Phones
For information about phones that can connect with the watch, visit the CASIO
website. https://world.casio.com/os_mobile/wat/
23
Watch Operation Guide 3519
Copyrights and Registered Copyrights
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by CASIO Computer Co., Ltd. is
under license.
iPhone and App Store are trademarks of Apple Inc. in the United States and
other countries.
iOS is a trademark or registered trademark of Cisco Systems, Inc.
GALAXY is a registered trademark of Samsung Electronics Co., Ltd.
Android and Google PlayTM are trademarks or registered trademarks of Google
LLC.
Other company names and product names used herein are trademarks or registered
trademarks of their respective companies.
Troubleshooting
I can’t pair the watch with a phone.
Q1 I’ve never been able to establish a (pairing) connection between the watch
and phone.
Are you using a supported phone model?
Check if the phone model and its operating system are supported by the watch.
For information about supported phone models, visit the CASIO Website.
https://world.casio.com/os_mobile/wat/
Did you install the CASIO WATCHES phone app on your phone?
The CASIO WATCHES phone app needs to be installed on your phone in order to
connect with the watch. l A Install the app on your phone.
Are your phone’s Bluetooth settings configured correctly?
Configure the phone’s Bluetooth settings. For details about setting
procedures, see your phone documentation. iPhone Users “Settings” n
“Bluetooth” n On “Settings” n “Privacy” n “Bluetooth”
n “CASIO WATCHES” n On Android Users Enable Bluetooth.
Other than the above.
Some phones need to have BT Smart disabled to use CASIO WATCHES. For details
about setting procedures, see your phone documentation. On the Home Screen,
tap: “Menu” n “Settings” n “Bluetooth” n “Menu” n “BT Smart settings” n
“Disable”.
I can’t reconnect the watch and phone.
Q1 The watch will not re-connect with the phone after they are disconnected.
Is the CASIO WATCHES phone app running?
The watch cannot re-connect with your phone unless CASIO WATCHES is running on
the phone. On your phone’s Home Screen, tap the “CASIO WATCHES” icon. Next, on
the watch, hold down (C) for at least three seconds.
Have you tried turning your phone off and then back on again?
Turn your phone off and then back on, and then tap the “CASIO WATCHES” icon.
Next, on the watch, hold down (C) for at least three seconds.
24
Watch Operation Guide 3519
Q2 I can’t connect while my phone is in the Airplane Mode.
Connection with the watch is not possible while the phone’s Airplane Mode is
enabled. After disabling the phone’s Airplane Mode, go to the phone’s Home
Screen and tap the “CASIO WATCHES” icon. Next, on the watch, hold down (C) for
at least three seconds.
Q3 I changed the phone’s Bluetooth from enabled to disabled, and now I can’t
connect anymore.
On your phone, re-enable Bluetooth, and then go to the Home Screen and tap the
“CASIO WATCHES” icon. Next, on the watch, hold down (C) for at least three
seconds.
Q4 I can’t connect after turning off the phone.
Turn your phone off and then back on, and then tap the “CASIO WATCHES” icon.
Next, on the watch, hold down (C) for at least three seconds.
Phone-Watch Connection
Q1 I can’t establish a connection between the phone and watch.
Have you tried turning your phone off and then back on again?
Turn your phone off and then back on, and then tap the “CASIO WATCHES” icon.
Next, on the watch, hold down (C) for at least three seconds.
Has the watch been re-paired with the phone?
After deleting pairing information from CASIO WATCHES, re-pair them. l
Deleting Pairing Information from the
CASIO WATCHES phone app l C Pair the watch with a phone.
If you are unable to establish a connection…
After deleting pairing information from the watch, re-pair it with your phone.
l Deleting Pairing Information from the
Watch l C Pair the watch with a phone.
Changing to a Different Phone Model
Q1 Connecting the current watch to another phone.
Delete the pairing information from your watch and then pair it with the phone
you want to connect with. l If you purchase another phone
Auto Time Adjustment by Bluetooth Connection (Time Adjustment)
Q1 When does the watch adjust its time?
The watch will connect with the phone and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30 p.m. and 6:30 p.m. The connection is
automatically terminated after auto time adjustment is complete.
Q2 Auto time adjustment is not performed at a scheduled time.
Is auto time adjustment not being performed according to its normal schedule?
Note that auto time adjustment is not performed for 24 hours after swapping of
the Home Time and World Time, or after the time setting is adjusted manually
on the watch. Auto time adjustment will resume 24 hours after either of the
above operations is performed.
Is a timer countdown operation in progress?
Auto time adjustment will not start at the scheduled times if a timer
countdown operation is in progress. Stop the timer countdown operation. l
Using the Timer
Is auto time adjustment enabled?
Auto time adjustment will not be performed at the scheduled times unless it is
enabled. Enable auto time adjustment. l Using the Watch in a Medical Facility
or
Aircraft
25
Watch Operation Guide 3519
Q3 The watch does not connect with a phone and adjust its time when I press
(D).
The watch will not adjust its time if you press (D) while a timer countdown
operation is in progress. Stop the timer countdown operation and then press
(D) again.
Q4 Time is not displayed correctly. If your phone is unable to receive a
signal because you are outside its service range or for some other reason, the
watch may not be able to display the correct time. If this happens, connect
the phone to its network and then adjust the time setting.
Alarm and Hourly Time Signal
Q1 An alarm does not sound. The alarm’s settings may not be configured.
Configure the alarm settings. l Configuring Alarm Settings
Q2 The hourly time signal does not sound.
The hourly time signal may be disabled. Enable the hourly time signal. l
Enabling the Hourly Time Signal
Other
Q1 I can’t find the information I need here.
Visit the website below. https://world.casio.com/support/
26
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>