CertainTeed Marco Spark-Perf Drywall Joint Tape – 2 1-16-in x 500-ft – Perforated Paper Instructions
- June 9, 2024
- CertainTeed
Table of Contents
CertainTeed Marco Spark-Perf Drywall Joint Tape – 2 1-16-in x 500-ft –
Perforated Paper Product Description
Marco Spark-Pert Drywall Joint Tape is a paper tape designed for use with joint compound to reinforce gypsum board joints and comers prior to painting, texturing or wallpapering.
Features and Benefits
- Tape is manufactured from a special fiber paper with the added tensile strength to help prevent tearing. winkling or stretching
- Joint tape is available in three styles: No Spark (no perforations), SpakPet, or Sot perforations, which helps to prevent blistering
- The tape is roughened on both sides for superior bonding and holding power
- The tape has a precision-matched center lease for easy and accurate comer applications
- Designed for use with all quality joint and taping compounds available on the market today
Product Data
- Material: Fibered Paper
- Color: White
- Packaging: See the chart on the back
- Storage: Tape should always be stored in closed cartons at normal room temperatures in an endo sed dry area.
- Environment Limitations: When applying drywall joint tape, follow the printed recommendations of the compound manufacturer. Apply tape only within the recommended minimum and minimum temperature range. Adequate ventilation is required to avoid any excess moisture.
- Technical References: For additional information on the application and finishing of Finishing Products please consult:
- ASTM C 475 : Standard specification for Joint Compound and Joint Tape for Finishing Gypsum Board.
- ASTM C 840: Standard Specification for Application and Finishing of Gypsum Board.
- GA-214: Gypsum Association publication Levels of Gypsum Board Finish.
- GA216: Gypsum Association publ cation Recommended Specifications for the Application and Finishing of Gypsum Board.”
Working with the Product
Application
- Designed to be used by both hand and automatic tool applications.
- Install gypsum board by following the published Installation Guide. Follow the printed insidious on the joint compound container for mixing and use of the compound prior to and during the tape application.
- For hand taping, apply a first coat of joint compound over the joint with a four-inch knife. Press the joint tape firmly into the compound by pressing the knife over the tape. Squeeze out excess compound, making sure that there is enough joint compound under the tape to ensure a good bond. Allow each coat to dry thoroughly before applying the next the tape does not along the edges after drying, simply cut out the affected area in the shape of a canoe before applying the next coat. If the tape fits in the center, tear out the affected area and re-tape. Apply a second and third o, ensuring ha al joints and fasteners are completely concealed by feathering each subsequent coat beyond the last. Sand between coats where necessary and finish until a smooth surface is achieved.
Read User Manual Online (PDF format)
Loading......