wogofor B0B4B328TT M33 PRO Portable Wireless Speaker User Manual

wogofor B0B4B328TT M33 PRO Portable Wireless Speaker

DIAGRAM OF CONTROLS

• Mode switch
  

• Short Prass

• (Wireless/AUX/USB/TF card)

• Turn On/Turn Off

• Shott press: Answer calls

• Long press : Turn Orv’Off/refuse call Double elide Wireless stereo connection

• Volume + / Next Track

• Short Press :Voh.ime up

• Long press: Next track

• Volume – / Forward Track

• Short Press : Vol1,une down

• Long press: Forward track

PRODUCT FEATURES

• Silicone handle design, easy to carry
•  USB-C Charging port
• Wireless stereo pairing function
• Rechargable battery, hands free function

WHAT’S INCLUDED

TECHNOLOGY SPECIFICATION

• Model No Speaker Dirver Sensitivity Size
• W1003
• 3″x2
• 95±3dB
• 262x124x124mm

CHARGING WIRELESS SPEAKER

Before using your “Wogofor M33 Pro”, please charge it using the USB-C charging cable included in the package.

1.  The speaker must be turned off before charging, to avoid making the speaker work abnormal, please do not chargewhen the unit is power on.
2.  Plug the small USB-C pin into the charging port on the rear side of speaker, and the another end of the cable (the standard USB 2.0 plug) into any standard USB port (such as a computer or USB charger).
3.  The red LED will automatically turn on while it’s charging, The LED indicator goes off when the battery is fully charged.

WIRELESS MODE

PAIRING

1.  Press and hold ” ►II” to turn your speaker on.
2. . “wogofor M33 Pro” is ready to pairing , the wireless LED indicator will flash blue. Usually set the steps to enter the “Settings”-> “connection” ->”wireless”.
3.  select” wogofor M33 Pro” “in the list.
4.  Once paired successfully, the power indicator turns blue and makes a prompt sound.
5.  When there is an Incoming call.press” ►ll”button to answer. If you need to hang up. Please press” ►II “again.

True wireless mode (same model only)

1. Turn on two speakers of the same model (make sure They are not connected to other wireless devices).
2.  Double click the” ►II “button on the first speaker, You will hear the”di”sound and the speaker will Automatically connect.
3.  After the two speakers are successfully connected, the blue LED indicator of one of the speakers will flash. At this point.the speaker has entered a state of waiting for connection, turn on the wireless device and connect to the”Wogofor M33 Pro”speaker.

AUX-IN MODE

If your device is not wireless enabled you can still enjoy your music simply by using the Aux-in audio jack_ Connecting the speaker with the audio cable that is included in the package to any device with a 3.5mm standard audio jack. Once connected the speaker can be used as a wired speaker.

CARE AND MAINTENANCE

1.  Long press “►II” 2 seconds to turn off the device, to make sure that it is properly protected.
2. To avoid high temperatures (above 40 degrees Celsius), for example, in hot cars or direct sunlight. High temperature will be damage the surface and reduce battery life.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>