VONYX STM2270 4-Channel Mixer Sound Effects Instruction Manual

June 9, 2024
VONYX

VONYX logo STM2270 4-Channel Mixer Sound Effects
Ref. nr.: 172.982
INSTRUCTION MANUAL
VONYX STM2270 4 Channel Mixer Sound Effects

STM2270 4-Channel Mixer Sound Effects

Congratulations to the purchase of this Vonyx product. Please read this manual thoroughly prior to using the product in order to benefit fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.

  • Prior to using the product, please ask advice from a specialist. When the product is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
  • The product contains voltage carrying parts. Therefore do NOT open the housing.
  • Do not place metal objects or pour liquids into the product. This may cause electrical shock and malfunction.
  • Do not place the product near heat sources such as radiators, etc. Do not place the product on a vibrating surface. Do not cover the ventilation holes.
  • The product is not suitable for continuous use.
  • Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
  • When unplugging the product from a mains outlet, always pull the plug, never the lead.
  • Do not plug or unplug the product with wet hands.
  • If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
  •  If the product is damaged to such an extent that internal parts are visible, do NOT plug the product into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the product to a rheostat or dimmer.
  • To avoid fire and shock hazard, do not expose the product to rain and moisture.
  • All repairs should be carried out by a qualified technician only.
  • Connect the product to an earthed mains outlet (220240Vac/50Hz) protected by a 10-16A fuse.
  • During a thunderstorm or if the product will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
  • If the product has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the product in humid rooms or outdoors.
  • To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
  • Do not repeatedly switch the product on and off. This shortens the life time.
  • Keep the product out of the reach of children. Do not leave the product unattended.
  • Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
  • Do not force the controls.
  • If this product is with speaker inside which can cause magnetic field. Keep the product at least 60cm away from computer or TV.
  • If the product has built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged.
  • If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
  • If the product has fallen, always have it checked by a qualified technician before you switch the product on again.
  • Do not use chemicals to clean the unit. They damage the varnish. Only clean the product with a dry cloth.
  • Keep away from electronic equipment that may cause interference.
  • Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
  • Switch the product off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the product.
  • Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
  • The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this product.
  • Keep the original packing material so that you can transport the product in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should read and adhere to.
The product has been certified CE. It is prohibited to make any changes to the product. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the product will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Vonyx cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

FRONT PANEL

VONYX STM2270 4 Channel Mixer Sound Effects - FRONT
PANEL

  1. MIC VOLUME Volume control of the microphone

  2. CUE VOLUME The CUE Volume rotary knob adjusts your headphone monitor output volume

  3. OUTPUT METER VU-meter with LED as indicators for the strength of the output signal.

  4. EQ Right channel 5-band EQ

  5. EQ Left channel 5-band EQ

  6. LINE1/USB INPUT SELECTOR

  7. CHANNEL 1 CUE SELECTOR SWITCH
    The button allows you to choose which channel you wish to monitor in your headphones by pressing the buttons down.

  8. CHANNEL 1 VOLUME FADER
    Channel fader will allow you to adjust the volume for that particular channel selected.

  9. PHONO1/LINE 2 INPUT SELECTOR

  10. CHANNEL 2 CUE SELECTOR SWITCH
    The button allows you to choose which channel you wish to monitor in your headphones by pressing the buttons down.

  11. STEREO/MONO Switch

  12. MASTER VOLUME FADER This fader will allow you to adjust the master volume of the unit

  13. CHANNEL 2 VOLUME FADER Channel fader will allow you to adjust the volume for that particular Channel selected

  14. SOUND EFFECTS SECTION
    Eight different sound effects ( ALIEN, APPLAUSE, SIREN, CROAK, GLASS,SCREAM,CROWD & BIRD) may be added to your mixer by pressing the SOUND EFFECTS CONTROL BUTTONS. The volume of the effects can be adjusted using the rotary VOLUME located the right side under the BIRD effects buttons.

  15. SPEED Sound effect speed adjustment

  16. CROSS-FADER Slide for step less cross-fading from one to another assigned channel.

  17. VOLUME Sound effect volume adjustment

BACK PANEL

VONYX STM2270 4 Channel Mixer Sound Effects - BACK
PANEL

  1. DC24V Connector for a power supply.
  2. GND Grounding e.g. for a turn table
  3. HEADPHONE Use the headphone for pre-listening the output signal.
  4. MASTER OUTPUT The MASTER output jacks connect the mixer to your main amplifier using standard audio cables with RCA-type connector.
  5. PHONO signal input
  6. LINE 2 signal input
  7. LINE 1 signal input
  8. Microphone input connector To insert your microphone

DISPLAY

VONYX STM2270 4 Channel Mixer Sound Effects - DISPLAY

  1. USB INPUT Insert your USB flash drive into this slot. The unit will only read .mp3 file formats from the USB flash drive.
  2. MP3 Player Starts the playback and pause function
  3. MP3 Player Selects the previous track (short press) or volume decreasing (long press)
  4. MP3 PLAYER Selects the next track (short press) or volume increasing (long press)
  5. MODE SELECTOR To allow you to select the input source

TECHNICAL SPECIFICATION

Power supply: 110~240VAC 60/50Hz via adapter 24Volt
Frequency response: 20 – 20.000 Hz
THD: <0.05%
Input level: Mic. 10mV, 10 kOhm
Input level: Phono 15mV, 22 kOhm
Input level: Line 300mV, 30 kOhm
Signal-to-noise ratio: >70dB
Output level: Master 2V
Equalizer: High +/- 10dB
Top hat: 35mm
Dimensions: 240 x 200 x 60mm
Weight: 1,55Kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community Directives to which they are subject:

European Union
Tronios B.V.,
Bedrijvenpark Twente Noord 18,
7602KR Almelo, The Netherlands| United Kingdom
Tronios Ltd.,
130 Harley Street,
London W1G 7JU, United Kingdom
---|---
2014/35/EU
2014/30/EU
2011/65/EC| **** S.I. 2016:1101
S.I. 2016:1091
S.I. 2012:3032

Specifications and design are subject to change without prior notice..
www.tronios.com
Copyright © 2022 by TRONIOS the Netherlands

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

VONYX User Manuals

Related Manuals