BALBOA water group ST3 Spa Touch Clear Panel Installation Guide
- June 9, 2024
- BALBOA water group
Table of Contents
BALBOA water group ST3 Spa Touch Clear Panel
TOPSIDE PANEL INSTALLATION
Correct Installation
- The topside panel is installed on the exterior portion of the spa tub, away from the spa water.
- The panel surface must be at a 10° angle (minimum).
- When the spa cover is installed, it does not contact the touch screen surface.
Incorrect Installation
- The topside panel is installed on the interior portion of the spa tub, next to the spa water.
- THIS MAY VOID THE WARRANTY.
- The spa cover contacts the touch screen of the topside panel.
- The touch screen surface is flat.
- A 10° angle (minimum) is recommended for a topside panel that is installed on the interior portion of the spa tub.
Contact Us
-
Phone P : + 714.384.0384 Customer Service is available:
M – TH 7:30AM to 7:00PM
F – 7:30AM to 5:00PM PT -
Corporate Office: Balboa Water Group 3030 Airway Avenue Costa Mesa, CA 92626
MEXICO OPERATIONS
Balboa Water Group Aguila Azteca 6011 Baja Maq. El Aquila Mexico 22221
EUROPEAN OPERATIONS
Balboa Water Group Hydroair International ApS Roustvej 50 DK-6800 Varde
VISIT US ONLINE
www.BalboaWaterGroup.com
References
Read User Manual Online (PDF format)
Loading......