H FELE Q 36 Surface Mounted Downlight User Guide
- June 9, 2024
- H fele
Table of Contents
H FELE Q 36 Surface Mounted Downlight
Quick Start Guide
for Nimbus Connect luminaires
(Compatible with Haefele Connect Mesh App)
Download app (Haefele Connect Mesh App)
**Android**
|
**iOS**
---|---
|
Create local network
Add devices (Provisioning)
Create groups & scenes
Add control devices
| Connect Mesh wall switch
---|---
| Connect Mesh remote control
| Connect Mesh furniture switch
| 2-channel / 4-channel interface
| – BLE modules
**Enjoy your setup!**
Luminaire States & Identify
for Nimbus Connect luminaires
(Compatibel with Haefele Connect Mesh App)
Factory condition
Luminaire ready for network-provisioning,
Lighting state: 100% / 3000 Kelvin,
Status LED (red) flashing,
Position of status LED:
Identify luminaire & add to network
-
Press luminaire icon to start Identify Sequence:
Selected luminaire will flash twice every second. -
Add selected luminaire to network by pressing the ‚ + ‘-symbol.
Reset luminaire
Opt. 1: Reset in App:
Always try this option first! -edit luminaire
-Delete luminaire (reset device)
Opt. 2: Magnetic Reset
-Place and hold a magnet for 10 seconds, luminaire will flash twice when magnet is detected and will dim down
(not with Modul Q16/Cubic16 Connect / Zen Connect)
Opt.3: Manual Reset
Push the reset button on backside and hold for 10 seconds, luminaire will
flash twice and dim down.
(not with Q Four Connect)
Luminaire in network
Luminaire not flashing.
Status LED (red) off.
**Enjoy your setup!**
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SI, Inc. and any use of such marks by Häfele SE & Co KG is under license. Other trademarks and trade names are those of their respective owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>