Cheego CCA3-F Smart Baby Monitor User Manual

June 9, 2024
Cheego

Smart Baby Monitor
User Manual

PACKING LIST

Clip-on Mounting

Cheego CCA3 F Smart Baby Monitor

Floor Stand Mounting

Cheego CCA3 F Smart Baby Monitor - fig

SAFETY

⚠ WARNING: Strangulation Hazard—Children have STRANGLED in cords. NEVER attempt to use cord without the protective covering. Check protective covering before each use to ensure that the cord is not exposed to your child. Immediately discontinue use if protective covering is damaged or broken.

  • This device is designed to be used on or next to a standard crib, in the middle of the long side of the crib.

  • Adult assembly is required. Keep small parts away from children when assembling.

  • This product cannot replace adult supervision. Ensure your child’s health by checking on him/her regularly.

  • This device is designed for indoor use only.

  • This product and its packaging are not toys. Do not allow children to play with them.

  • Falling warning—In order to prevent products fell to hurt, be sure to install the monitor in a stable location, tighten the screws and tighten button, securely monitor your device.

  • Make sure the virtual installation position in Cheego Smart Application is same to the actual installation position in the crib. And make sure the camera could capture the baby’s facial image clearly after the installation.

  • This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this  device must accept any interference received, including interference that may cause undesired operation.

  • NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if  not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
    However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television  reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.

  • Increase the separation between the equipment and receiver.

  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

  • Consult the dealer or an experienced radio/TV technician for help.

  • This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a  separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

  • To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”

PRODUCT INTRODUCTION

  • Please read this user manual carefully before using the device

Cheego CCA3 F Smart Baby Monitor - fig 2

  • SMART THERMOMETER
    With built-in AI chip& sensor, we use advanced algorithm advanced algorithm to realize ± 0.3 degrees high precision temperature monitoring.
    Record 7 days temperature data automatically.

  • LIVE VIDEO AND TWO-WAY AUDIO
    You could watch& record the video, set the resolution, and adjust the pan/tilt angle of the image anytime via Cheego Smart Application. Hear or speak to your baby with
    two-way audio of the device.

  • INFRARED NIGHT VISION
    The camera will be switch to night vision mode based on the ambient light changes.
    Cheego Smart Baby Monitor adopted back-illuminated night vision mode to avoid the infrared light directly illuminate at the baby’s eyes.

  • TOUCH SENSOR (ON/OFF) LED LIGHT
    The LED light is adjusted and controlled by Cheego Smart APP.

  • WIRELESS AUDIO DELIVERY
    Push music (or story) to the monitor’s speaker to play through wireless delivery unction.

  • TEMPERATURE HUMIDITY SENSOR
    Let you know the room’s temperature & humidity accurately. Make sure your baby is in comfort environmental conditions.

  • HI-FI SPEAKER
    Can push music (or story) to the monitor’s built-in speaker for playback through wireless delivery function.

  • PRECIOUS MEMORIES
    The built-in MicroSD card could record every adorable memory of your baby. And you could playback the recording video by Cheego Smart Application.

  • AI FUNCTIONS
    With built-in AI chip, Cheego Smart Baby Monitor uses embedded algorithm and temperature detection module to realize below AI functions.
    ▶ Crying Detection
    Use intelligent algorithms to detect baby’s crying accurately. When it detected baby’s crying, the smart night lamp will be auto lighted up and the white noise will be auto started.
    ▶ Wake Up Reminder
    Automatically send alarm messages to Cheego Smart Application if the baby is wake up.
    Smart Lullabies white noise comfort
    When the device detected baby’s crying, the lullabies and white noise will be auto started.
    ▶ High precision contact-less detection of baby’s temperature
    Use intelligent algorithms to detect baby’s forehead temperature. And the device will automatically send alarm messages to the Cheego Smart Application if the temperature is overheated. And users could set the alarm level in the application.

  • VIDEO SHARING
    The device can be set as a shared device in the tools menu of Cheego Smart Application. And you could invite your family members to watch the video via their own Cheego Smart Application.

INSTALLATION

  • Cheego Baby Monitor supports two installations: Clip-on Mounting and Floor Stand Mounting. Please watch the installation video before you start install it.
  1. Clip-on Mounting
    • The device is with Temperature Measurement function, so you need to choose one position from below three positions to install.
    • Use the Allen wrench and M825 Screw to connect the camera and the clip bracket, then to fix the baby monitor to the selected position on the crib and tighten the screw.
    Step1: connect the camera and the clip bracket
    Step2: Use the Allen wrench and M8
    25 Screw
    Step3: Fix the baby monitor to the selected position
    (EX: ①②③ ) on the crib and tighten the screw![Cheego CCA3 F Smart Baby Monitor
  • fig 5](https://manuals.plus/wp-content/uploads/2023/01/Cheego-CCA3-F-Smart- Baby-Monitor-fig-5.png)

    1. Floor Stand Mounting
      • Screw up the two aluminum rods, and tighten it with the counterweight plate, then connect the camera with the fixed aluminum rod.
      Tips:
      • Cheego Smart Baby Monitor adopted back-illuminated night vision mode to avoid the infrared light directly illuminate at the baby’s eyes. Thus, please install the baby monitor against the wall (or any place which could reflect light).

Cheego CCA3 F Smart Baby Monitor - fig 6 Tips:

  1. The device is with Temperature Measurement function, so you need to put the device on one position from above three positions.
  2. Position ① (headboard) is the best installation position for temperature measurement.

NOTES

  • When you download and complete the register the Cheego Smart Application, it will shows three recommended installation positions, please make sure the actual installation position keep same with the virtual installation position in your Cheego Smart Application.

  • And please check if the camera could capture baby’s facial image in your Cheego Smart APP after the installation and setting. If not, please adjust the installation position or angle.

  • The device is with Temperature Measurement function, so you need to put the device on one position from above three positions.

  • Position ① (headboard) is the best installation position for temperature measurement.

  • Cheego Smart Baby Monitor adopted back-illuminated night vision mode to avoid the infrared light directly illuminate at the baby’s eyes. Thus, please install the baby monitor against the wall (or any place which could reflect light).

  • Before temperature measurement, if there is a temperature difference between the monitor and the measurement environment, please leave the monitor for at least 50
    minutes. Otherwise, there may be errors in the temperature measurement results.

  • Factory reset
    ▶ If you change the network or Cheego APP account connected to the camera, you need to call up the reset QR code in the mobile app. Aim the reset QR code below
    the camera until you hear the “device reset successful” tone, the camera factory reset is successful, and then reconnect to the APP.
    ▶ Factory reset will not delete the contents of the MicroSD card
    ▶ To protect user privacy, our video only save in local storage card and not uploaded to the cloud. Memory card is 32G. loop video recording, memory full will be automatically overwritten.It is recommended that users can download wonderful videos to their mobile phones for permanent storage.

INSTRUCTIONS

  • BOOT
    Please connect the camera and the power adapter. Once the device power on, after 5 seconds, the LED light will turn on. After 10 seconds, the LED light will turn off. As same time, the new device enters the initialization state. Please wait about total 35 seconds and hear the device boot up successfully.

  • GET START CHEEGO SMART APP
    Download the Cheego Smart App from Apple Store or Google Play. Or scan the QR code on the device or in the manual.
    ⚠ Cheego Smart APP will upgrade and update. The actual operation may be different from the above description, Please follow the instructions in the current version.
    ⚠ When connecting, please keep the network good and the monitor turned on. 5GHz Wi-Fi network is unavailable. Please set it to 2.4GHz first.

Cheego CCA3 F Smart Baby Monitor - qr codehttps://www.icheego.com/appdownload?mode=cca3Cheego CCA3 F Smart
Baby Monitor - fig 7

CHEEGO SMART APPLICATION SETUP GUIDE
Before connect to Cheego Smart App, the new device enters the initialization state.
Please wait about 35 seconds and hear the device boot up successfully 5GHz Wi- Fi network is unavailable. Please set it to 2.4GHz first

  • Download the Cheego Smart App and set up your account.

  • Follow the in-app instructions to set up your Cheego Smart Camera. Choose:
    Homepage > Add your device > Scan QR code to connect>Pair succeed> Choose installation way> Choose installation position

  • You can choose to follow the assembly instructions in-app or in this booklet.

Tips:

  1. Add device or device initialization. If it is a new device, click next directly. To pair network. If it is an old device, Please click “configure the network by steps”, and refer to picture 2) and 3) for device initialization.

Cheego CCA3 F Smart Baby Monitor - fig 8 Tips:

  1. Cheego Only supports 2.4GHz Wi-Fi network & Enter the password. 5GHz Wi-Fi network is unavailable. Please set it to 2.4GHz first.
  2. Place the QR code 15-20 cm right in front of the lens. Scan and pair network.

Cheego CCA3 F Smart Baby Monitor - fig 9 Tips:

  1. Select installation positions. Please make sure the actual installation position keep same with the virtual installation position in your Cheego Smart App.
  2. Please check if the camera could capture baby’s facial image in your Cheego Smart APP after the installation and setting. If not, please adjust the installation position or angle.

Cheego CCA3 F Smart Baby Monitor - fig 10

TECHNICAL DATA

Model CCA3-C CCA3-F
Sensor 1/2.5″ 5MP CMOS
Focal Lens 2.1mm
Iris F2.0
Horizontal Viewing Angle 120°
Wi-Fi 2.4GHz, IEEE 802.11b/g/n/d/e/h/i
Support System Android 7.0 or IOS 11.0 or above
Power DC12V, 1A, slOW
Net Weight 1.8 kg 3.7 kg
Resolution 1280×720
TF card 32G
Installation Clip-on Mounting Floor Stand Mounting
Speaker Power 3W
Frequency Range 150-20000Hz
Temperature Measurement Accuracy *0.3°
LED Power 2W
Color Temperature 4000K

APP MAIN PAGE FEATURESCheego CCA3 F Smart Baby Monitor - fig
11 GUARANTEE & WARRANTY
SATISFACTION GUARANTEE & RETURN POLICY
Thank you for purchasing Cheego products. If you are not completely satisfied with your purchase, you may return the product for a full refund within 30 calendar days  of setting up a hardware product ( icheego.com) or within 15 days of activating an online product (Cheego authorized online reseller). This satisfaction guarantee requires proof of purchase from an authorized seller. Purchases from 3rd party retailers will need to be returned to the original place of purchase.
LIMITED WARRANTY
This limited warranty contains important information about your rights and obligations, as well as limitations and exclusions that may apply to you.
This limited warranty only applies if you are original purchaser, use and operate the product in the United States or Canada. Please note if you are not resident of the United States or Canada, this Limited Warranty & Return Policy does not apply to you.
PRODUCTS OBTAINED FROM UNAUTHORIZED RETAILERS ARE NOT COVERED BY THIS LIMITED WARRANTY.
Please be aware that there are some retailers and websites that claim to be authorized retailers of Cheego when they are not. Note that when you purchase from these unauthorized retailers, you are taking a risk, including a risk that these products are used or defective, and this limited warranty will not apply.

  1. WHAT THIS LIMITED WARRANTY COVERS?
    PERIOD OF COVERAGE. Warrants to the owner of the enclosed product that the product contained in this box (“Product”) will be free from defects in materials and workmanship for a period of one (1) year from the date of delivery following the original retail purchase (the “Warranty Period”). If you believe you have received a defective product, we will either repair or replace the defective product or its defective component part(s) in accordance with the terms of this limited warranty. We warranty the replacement for the remaining unexpired period of the original product’s warranty. This limited warranty is the only warranty available for our products.

  2. WHAT THIS LIMITED WARRANTY DOES NOT COVER?
    • Products marked as “sample” or “Not for Sale”, or sold “AS IS”;
    • Ineligible Products that have been subject to:
    (a)Modifications, alterations, tampering, or improper maintenance or repairs;
    (b)Handling, storage, installation, testing, or use not in accordance with the Terms
    of Service or other instructions provided by Cheego;
    (c)Abuse or misuse of the Product;
    (d)Damages caused by Acts of God, including but not limited to lightning, flood, tornado, earthquake, or hurricane;
    • Consumables parts, including but not limited to batteries, unless damage is due to defects in materials or workmanship of the product;
    • You use unauthorized service providers for maintenance or repair;
    • Unauthorized use of the Product or software can impair the Product’s performance;
    • This limited warranty does not warrant to covered any software, even if packaged or sold with the Products;
    • Refer to the licensing agreement accompanying the software for details of your rights with respect to its use;
    • This limited warranty does not warrant that the operation of the product will be uninterrupted or error-free;
    • This warranty cannot be transferred from the original end-user to others for any such transfer.

  3. NOT A MEDICAL DEVICE.
    The products are not medical devices and are not intended to be used as a medical devices.

  4. DISCLAIMER OF WARRANTIES.
    EXCEPT AS STATED ABOVE IN SECTION 1 OF THIS LIMITED WARRANTY, AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, CHEEGO DISCLAIMS ALL EXPRESS, IMPLIED, AND STATUTORY WARRANTIES AND CONDITIONS WITH RESPECT TO THE PRODUCT, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, CHEEGO ALSO LIMITS THE DURATION OF ANY APPLICABLE IMPLIED WARRANTIES OR CONDITIONS TO THE DURATION OF THIS LIMITED WARRANTY.FOR THE AVOIDANCE OF DOUBT, NOTHING IN THIS CLAUSE 6 IS INTENDED TO EXCLUDE ANY WARRANTIES OR GUARANTEES WHICH CANNOT BE EXCLUDED UNDER APPLICABLE LAWS.

COMPLIANCECheego CCA3 F Smart Baby Monitor - fig
12 DECLARATION OF CONFORMITY
Hereby, Hangzhou Cheego Technology Co., Ltd. Room 603, Bldg. E2, 3# Xiyuan 8 Road, Hangzhou, 310030, China, declares that the equipment Model CCA3 is in compliance with Directive 2014/53/EU.
PRODUCT USE WARNING
This product is meant for indoor use only.
RADIO FREQUENCY (RF) EXPOSURE STATEMENT
This equipment should be installed and operated with a minimum distance of 20 cm between the camera and the human body.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service or the shop where you bought this product.

www.icheego.com
support@icheego.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals