WISFOR XMR-C28 28 in. W x 36 in. H Large Rectangular Instructions

WISFOR XMR-C28 28 in. W x 36 in. H Large Rectangular Instructions

Brand Introduction

WISFOR LED Bathroom Mirror, Make Life Easier
WISFOR has been committed to helping simplify busy lifestyles by providing consumers with quality bathroom products for years.

Features Anti-fogging/Dimmable light/Memory function, our mirror is designed with customer’s demand and it comes with 1 year warranty. Perfect choice for your bathroom, bedroom and makeup room.

• We strictly implement quality control to ensure that the products are 100% safe and qualified. If there is any problem when you receive the please feel free to contact us by email.
• If you are satisfied with our products, please share them with your friends. We look forward to your comments and video feedback as well as your suggestions for us.
  

Product Introduction

Product Structure

• Round Shape
  

• Oval Shape
  

• Rectangle Shape
  

1. On/Off Switch – Short press the button for On/Off / long press to adjust brightness
2. Light Change Button – Press the left/right for different lighting. White/  Warm White/ Warm Light
3. Anti-fog Button – Press the button for anti-fog function
4. Power line plug
5. Hanging hook

Functions of Mirror

On/off Button- Brightness control and adjustment

**** Short press the button for On/Off the light Long press to adjust light brightness.

“ For the on-off key, white for on state, yellow for off state.

Light Change Button- adjust different lights

**** Short press the button to adjust from white/ warm white/ warm lighting color.

• You need to turn the on-off key on to switch the color temperature.
  

Anti-Fog Button- defog the mirrior

**** Press slightly to switch on the anti-fog function.

• Anti-fog function for being used separately. You can turn it off separately when not in use
• Anti-fog Constant Temperature: 45°C.
  

*Please make sure the fingerprint fits fully when pressing on the button.
Do not use the finger tip.

Memory Function

*The mirror features memory function, the next time you turn the light on, the lighting color will be the same as the last one.

Parameter

Details

Product Installation

Installation Precautions

1. When installing the bathroom mirror, please first pick up the bathroom mirror and confirm the best installation height for marking, then punch for installation
2. Make sure your face is in the middle of the mirror for a better image.
   Recommend Height
   

Round / Oval Bathroom Mirror Installation

Tools to be prepared

• Tape Measure

• Pencil

• Drill

• Hammer

• Screwdriver

• Screw Kit (Set)

1. Measure the best installation height with a tape measure.
   

2. Mark the wall with a pencil.
   

3. Drill the marks with an electric drill.
   

4. Drive the expansion rubber plug into the hole.

5. Drive a screw into the hole.

6. Hang up the bathroom mirror.
   

Square Bathroom Mirror (Vertically/Horizontally)

Tools to be prepared

• Tape Measure

• Pencil

• Drill

• Hammer

• Screwdriver

• Screw Kit (Set)

1. Measure the distance of the bathroom mirror hook.

2. Lift the bathroom mirror up to confirm the best mounting height.

3. Mark the wall with a pencil.
   

4. Drill the marks with an electric drill. Drive a screw and an expansion plug into the hole.

5. Hang up the bathroom mirror.

6. You can hang it vertically in the same way.
   

Wiring Method

Method 1:

Power Plug
Extend the line of the bathroom mirror from the grooves on the side and plug it in to use.

Method 2:

Reserved Wire
Cut off the plug of bathroom mirror with scissors and connect the reserved thread.

Method 2:

Control the light with a wall switch
Cut off the plug of mirror, hardwire to a wall switch.

Warm Tips

1. When wiring, pay attention to the electricity specification, and use waterproof tape to operate;
2. After using the defogging function, turn off the function in time to prevent the defogging film from being damaged;
3. Bathroom mirror light strip and defogging film can be replaced if damaged;
   

If you have any suggestions or advice, please feel free to e-mail our customer services.

Fault Isolation Manual

pedestal
B.poor contact between the led strip and terminal connection| Rewire again
C.led strip damage| Replace the led strip
Thermal Fuse doesn’t work| The touch witch works| Needs to wait for 3-5min, the Thermal Fuse area can be heating| Normal
The Thermal Fuse get damaged if there is still no heating effect after Smin| Change the Thermal Fuse

WISFOR LED Bathroom Mirror, Make Life Easier

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>