Techwonderz F169 1080P HD Brushless Drone with Camera Instruction Manual

14+ AGE
FOLDING DRONE WITH OBSTACLEAVOIDANCE
FUNCTION OPERATING MANUAL

*Please read this manual carefully before operation and keep it properly for future reference.

https://youtube.com/watch?v=z_qeAnam1j8&feature=shareb

KNOW YOUR DRONE

With 2.4G frequency band for long remote control distance, Drone allows multiple flights at the same time without any nterence. User can control it to fly, hover and take photos/ videos with APP and WIFI connection on smart phone.

1. Upper Casing
2. Lower Casing
3. Camera
4. Obstacle Avoidance head
5. Propeller
6. Motor
7. Arm
8. Battery

PRE-FLIGHT PREPARATION

1. FLIGHT ENVIRONMENT

Indoor: Spacious soaces away from barriers,crowds or pets are preferred.

Outdoor: Sunny, windless and breezy weathers are preferred

Please keep the dorne in sight during the flight and keep ti away from barriers, high-tension cables, trees and people.

Do not fly in extreme environment,such as hotness,coldness, strong wind or heavy rain.

2. OPEN THE WINGS OPENING STEPS:

1. Open the fontorm dosefocomera
2. Open the back arm, Fold the back armi firstly and then the ront ‘arm when folding

4. ASSEMBLING PROPELLERS

Align the blade with the blade hole (the dentification of the arm should be consistent with that of the blade) and tighten the screws clockwise. (Adapters are purchased separately. The replacement of damaged blades should also be identified according to AB blades.)

5. BATTERY CHARGING FOR DRONE

Remove the lithium battery from the bottom of the drone.

Connect USB charging cable with the charging interface of the ithium battery.(Adapters are purchased separately)
Notes:
Before using the drone, the battery needs to be fully charged, LED lights on when charging and red ight turn off when full charging completes. Charging time is about 60 minutes.

BATTERY LNSTRUCTIONS

• There is a certain risk when using lithium battery.It may cause fire, body injury or property loss.Users must be aware of tthe risks and take full responsibility of using battery improperly.
• If battery eakage occurs,please avoid contacing you eyes or skin with electrolyte. Once it happens, please wash your eyes with clean water and seek medical care mmediately.
• Please remove the plug mmediately if you sense any peculiar smell, noise or smog.

Battery Charging

• Please use the charger from original factory the ensure you safe usage.
• Do not charge dilatant or outworn battery.
• Do not over charge battery. Please unplug the charger once fully charged,
• Do not charge the battery next to nflammables, such as carpet, timber floor or wood furniture or in the surface of electro­ conductive objects.
• Do not charge battery which not cool down yet.
• The charging temperature should be between 0°C to 40°C.

Battery Recycling

• Do not dispose the battery ad daily rubbish,Please familiarize yourself with the ocal garbage disposal mathod and dispose it according to the special requirement.

KNOW YOUR REMOTE CONTROL

Parts of temote control

1. Phone support
2. Speed switch
3. One-key Calibration
4. Sress and hod for one-Key back
5. One-key take-off
6. One-key Flips & Rolls
7. Fine—tuning key
8. Obstacle Avoidance
9. One-key landing
10. Left joystick
11. Right joystick
12. ON/OFF

MOBILE OHINE INSTALLATION

1. Open the mobile phone bracket on the remote control.
2. Install the mobile phone on the mobile phone bracket.

BATTERY INSTALLATION

1. Open the remote control battery cover
2. Remote control battery installation

As shown in the figure, to dent fy the posit ve and negat ve term nals and install the battery correctly. (Batteries need to be purchased separately)

Notes:

1. When installing a battery, it s necessary ta identify the positive and negative poles of the battery, and do not install the battery upside down.
2. Please do not mix old and new batteries together.
3. Please do not mix different types of batteries together.

FREQUENCY ALIGNMENT

1. Turn on the drone and place it on a evel surface, the indicator light of transmitter and the LED of drone flashing.
2. Push the throttle joystick to the hightest point the push back to the lowest point , and whenyou hear two beeps , the indicator light of transmitter and the LED of drone become normally on , the signal connection as completed.

TRANSMITTER CALIBRATION

If the aircraft cannot rise vertically after taking off, in can be corrected by pulling the left and right joysticks nto an outer eight al the same time with a shound of Di and the indicator light flash quickly to long­ retm on, the calibration is completed , When  executing the correciton command, the aircraft must be place n a smooth state parallel to the horizontal line, otherwise the correction effect will be affected ( The drone needs lo be calibrated before take-off )

START YOUR FLIGHT

1. One-key Ascend/One-key landing
Press the button of One key take off, the aircraft wind blade rotates, and automatically fly to a height of about 1.5 meters. And press the button of One key landing, it will automatically land to the ground.

2. Basic Flight
Use the eft oystick to control the flight altitude and turn left / right, and the right joystick to control the forward, backward, left and right sidde flight directions.

Left ioystick

Right joystick

FLIPS & ROLLS

When the drone is reaching more the 3 metershigh,click “360° flips and rolls” and move theright joystick to acertain direction,the drone will rotate in that direction.

Right joystick

HEADLESS MODE

Adjustment, the drone defaults to the normal mode with the indicator light steady on. When press the headless mode button on the remote control, the remote control emits a sound of Di to indicate that enter the headless mode.(It needs to face the drone to open the headless mode.) And then press the button again with a ong sound of Di to exit headless mode. it does not need to identify the nose direction of the drone, but only controls the aircraft according to the direction of the remote control.

SPEED SWITCH
Press the speed switch button of the remote control to change the speed of the aircraft. When t s switched to the low gear, the remote control delivers one sound of Di. When switching to the medium speed, the remote control emits two sounds of Di. When it switch to high gear , the remote control beeps three times. Each t me the remote control s turned off and the aircraft is restarted, the aircraft gear will automatically return to low gear.

HOVER
When you release the left oystick throttle) after the ascent/descent action, the dronewill hover at a certain height.

Left joystick

OBSTACLE ABOIDANCE MODE
Press the button to start the obstacle avoidance mode, and hover when encountering obstacles with avoid obstacles on three sides, and then press again to close the obstacle avoidance mode.

It is recommended to turn on the obstacle avoidance function in an indoor flight environment with a length and width of 6×6 meters or more. When the UAV turns on the obstacle avoidance mode, the speed will slow down and the fast gear cannot be turned on.
Therefore, it is recommended to fly indoors when the opstacle avoidance mode is turned on.

FINE-TUNING FUNCTION

When the aircraft spins in the air or tilts in different directions , you can use fine-tuning to correct the action. Press the fine-tuning button and hear a beep , then movethe joystick in the opposite direction to adjust and calibrate until the aircraft does not deviate.If there is no operation for 5—6seconds after entering the fine-tuning,the fine-tuning function will automatically exit.

1. Forward/Backward Fine-tuning
2. Left/Right Side Fly Fine-tuning

Notes:
When the drone s within 30 cm from the ground, it will be affected by the blade vortex made by itself and become unstable.This is “ground effect” . The ower the drone is, the greater the effect will be.

FAQ

quadcopter battery in right way.
Too strong wind force.| Do not fly in windy days. The performance and the control of the quadcopter will beaffected by the strong winds.
Fail to ascend| The rotation speed of mian blades is too slow.| Please full charge the quadcopter.
The battery of the quadrocopter is not fully charged.| Please full charge the quadcopter.
Landing too soon| The throttle stick is pulled down too fast.| Pull down the throttle stick slowly to perform a smooth landing.
Out of control| Beyond the effective controlling distance.| Ensure operation within the controllable distance: remote control of 100 meters and WIFI control of 40-50 meters

ACCESSORIES

Notes: Please check the number of accessories carefully ( as shown above ) , Please provide proof of purchase and contact the store for replacement if any missing parts.

OPTIONAL ACCESSORIES LIST

If any of the above accessories are damaged during operation, you can contact the seller to purchsae.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>