WISFOR XMR-C28-968-US Extra Large Rectangular Frameless Defog Dimmable Wall LED Bathroom Vanity Mirror Instruction Manual
- June 9, 2024
- WISFOR
Table of Contents
WISFOR XMR-C28-968-US Extra Large Rectangular Frameless Defog Dimmable
Wall LED Bathroom Vanity Mirror
Brand Introduction
WISFOR LED Bathroom Mirror, Make Life Easier
WISFOR has been committed to helping simplify busy lifestyles by providing
consumers with quality bathroom products for years.
Features Anti-fogging/Dimmable light/Memory function, our mirror is designed
with customer’s demand and it comes with 1 year warranty. Perfect choice for
your bathroom, bedroom and makeup room.
- We strictly implement quality control to ensure that the products are 100% safe and qualified. If there is any problem when you receive the mirror, please feel free to contact us by email.
- If you are satisfied with our products, please share them with your friends. We look forward to your comments and video feedback as well as your suggestions for us.
Product Introduction
Product Structure
- On/Off Switch – Short press the button for On/Off / long press to adjust brightness
- Light Change Button- Press the lef/right for different lighting. White/ Warm White/ Warm Light
- Anti-fog Button – Press the button for the anti-fog function
- Power line plug
- Hanging hook
Functions of Mirror
On/Off Button – Brightness control and adjustment
Short press the button for On/Off the light Long press to adjust light brightness
Light Change Button – adjust different lights
Short press the button to adjust from white/ warm white/ warm lighting color
Anti-Fog Button – defog the mirror
Press slightly to switch on the anti-fog function
Parameter
Details
Product Installation
Installation Precautions
-
When installing the bathroom mirror, please first pick up the bathroom mirror and confirm the best installation height for marking, then punch
for installation -
Make sure your face is in the middle of the mirror for a better image.
Round/ Oval Bathroom Mirror Installation
Tools to be prepared
- Measure the best installation height with a tape measure
- Mark the wall with a pencil
- Drill the marks with an electric drill.
- Drive the expansion rubber plug into the hole.
- Drive a screw into the hole.
- Hang up the bathroom mirror.
Square Bathroom Mirror (Vertically/Horizontally)
Tools to be prepared
- Measure the distance of the bathroom mirror hook.
- Lift the bathroom mirror up to confirm the best mounting height
- Mark the wall with a pencil
- Drill the marks with an electric drill. Drive a screw and an expansion plug into the hole.
- Hang up the bathroom mirror.
- You can hang it vertically in the same way
Wiring Method
Method 1
POWER PLUG
Extend the line of the bathroom mirror from the grooves on the side and plug it in to use.
Method 2 Reserved Wire
Cut off the plug of bathroom mirror with scissors and connect the reserved thread.
Warm Tips
- When wiring, pay attention to the electricity specification and use waterproof tape to operate;
- After using the defogging function, turn off the function in time to prevent the defogging film from being damaged;
- Bathroom mirror light strip and defogging film can be replaced if damaged;
If you have any suggestions or advice, please feel free to e-mail our customer services.
Fault Isolation Manual
Fault
| ****
Status
| ****
Fault Isolation
| ****
Solutions
---|---|---|---
Switch on, but the light is out of work| The touch witch doesn’t work| Led
drive go wrong| Change the led driver
The touch witch works
| A.switch pedestal have poor contact| Replace the switch pedestal
B.poor contact between the led strip and terminal connection| Rewire again
C.led strip damage| Replace the led strip
Thermal Fuse doesn’t work
| ****
The touch witch works
| Needs to wait for 3-5min, the Thermal Fuse area can be heating| Normal
The Thermal Fuse get damaged if there is still no heating effect after 5min|
**** Change the Thermal Fuse
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>